Quick answer
The 1998 Honda CR-V typically uses a traditional edge-cut metal key with no transponder chip. Big Daddy Car Key Replacement makes 1998 Honda CR-V keys on site in Pasadena, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 1998 Honda CR-V
- Typical key
- Traditional metal key
- Transponder chip
- No
- Blade
- Edge-cut
- Programming
- Not normally required
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 1998 Honda CR-V use?
- How we make a 1998 Honda CR-V key
- How Honda key and immobilizer systems work
- Common Honda key and lock problems
- All keys lost or just need a spare?
- Stranded with your Honda right now?
- 1998 Honda CR-V key replacement across Pasadena
- Getting a 1998 Honda CR-V key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Honda key?
- What affects the cost of a 1998 Honda CR-V key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers in Pasadena choose Big Daddy
- Looking after your Honda key
- Choosing a car locksmith you can trust
- Other Honda CR-V years
- Other Honda models
- Related automotive locksmith services in Pasadena
- 1998 Honda CR-V keys near Pasadena
- 1998 Honda CR-V key replacement in Pasadena: frequently asked questions
What kind of key does a 1998 Honda CR-V use?
The 1998 Honda CR-V typically uses a traditional edge-cut metal key with no transponder chip.
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

How we make a 1998 Honda CR-V key
For the 1998 Honda CR-V we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.
This page covers the 1998 model year. For other years, see the Honda CR-V key replacement overview, or browse all Honda models.
How Honda key and immobilizer systems work
Honda and Acura immobilizers register each key’s transponder in the engine computer or immobilizer unit. There is no owner self-programming; a diagnostic tool is always required. Most models from the early 2000s use a laser-cut blade, later ones a remote-head key, and Smart Entry proximity keys appear from the mid-2010s. When adding a key, existing keys are usually re-registered in the same session.
Honda began fitting immobilizers in 1998 and laser-cut keys soon after. Honda transponder keys cannot be self-programmed; a diagnostic tool is always needed, even to add a spare.
Common Honda key and lock problems
These are the issues we see most often on Honda vehicles in Pasadena:
- Worn laser-cut keys that stop turning the ignition smoothly
- Ignition cylinders with sticking wafers on high-mileage Accord, Civic and CR-V models
- A flashing green key light when the chip is not recognized
- Remote-head keys with cracked cases or worn buttons
All keys lost or just need a spare?
There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.
Stranded with your Honda right now?
If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.
1998 Honda CR-V key replacement across Pasadena
Located in Los Angeles County, Pasadena is an incorporated city within our San Gabriel Valley service area. We cover every part of Pasadena, including Old Pasadena, South Lake, the Playhouse Village, Bungalow Heaven, Linda Vista, Hastings Ranch, Madison Heights, and East Pasadena. Wherever you are in town, the technician comes to your door, driveway or parking space. We serve the 91101, 91103, 91104, 91105, 91106, and 91107 ZIP codes.
Pasadena is famous for Craftsman architecture, and its landmark districts are full of original mortise locks and hand-fitted doors, alongside modern offices, labs and condos that need current commercial hardware.
People call us from all over Pasadena, including the areas around the Rose Bowl, Old Pasadena, Caltech, the Norton Simon Museum, and Pasadena City Hall. A landmark or cross street helps the technician reach you quickly. Depending on where the closest technician is, the drive into Pasadena follows I-210, SR-134, SR-110, Colorado Boulevard, Lake Avenue, and Fair Oaks Avenue. You get a realistic arrival estimate when you call.
Getting a 1998 Honda CR-V key made, step by step
Call with the year, make and model
Tell us you need a key for a 1998 Honda CR-V, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Honda key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 1998 Honda CR-V key
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
- Immobilizer
- The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
- All keys lost
- A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
Situations we are called to most often
- A hardware-store copy opens the door but the engine will not start.
- The only key to the car is lost somewhere between the beach, the restaurant and home.
- The ignition will not turn and the key will not come out.
- The dash reads "key not detected" and the start button does nothing.
- The key is locked in the trunk and the trunk release is disabled.
Why drivers in Pasadena choose Big Daddy
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Pasadena.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.

Looking after your Honda key
Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.
- When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
- Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
- If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
Choosing a car locksmith you can trust
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Get an itemized receipt showing labor, parts and the business details.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
Other Honda CR-V years
- 2026 CR-V
- 2025 CR-V
- 2024 CR-V
- 2023 CR-V
- 2022 CR-V
- 2021 CR-V
- 2020 CR-V
- 2019 CR-V
- 2018 CR-V
- 2017 CR-V
- 2016 CR-V
- 2015 CR-V
- 2014 CR-V
- 2013 CR-V
- 2012 CR-V
- 2011 CR-V
- 2010 CR-V
- 2009 CR-V
- 2008 CR-V
- 2007 CR-V
- 2006 CR-V
- 2005 CR-V
- 2004 CR-V
- 2003 CR-V
- 2002 CR-V
- 2001 CR-V
- 2000 CR-V
- 1999 CR-V
- 1997 CR-V
Other Honda models
- Honda Accord keys
- Honda Civic keys
- Honda Odyssey keys
- Honda Pilot keys
- Honda Ridgeline keys
- Honda Passport keys
- Honda Insight keys
- Honda Fit keys
- Honda Prelude keys
- Honda HR-V keys
- Honda S2000 keys
- Honda Element keys
- Honda CR-Z keys
Related automotive locksmith services in Pasadena
- Trunk Lockout Service
Opening locked trunks when keys are lost or locked inside.
- Key Fob Programming
Programming new or replacement key fobs.
- Emergency Vehicle Lockout
Fast unlocking for cars, trucks, SUVs, vans and work vehicles.
- RV Key Replacement
Replacing keys for RV doors, compartments, storage locks and ignitions.
- Car Key Cutting
Cutting standard, high-security and laser-cut automotive keys.
- Car Locksmith
On-site car key, lockout and ignition help wherever the vehicle is parked.
- Semi-Truck Locksmith
Lockouts, key replacement, ignition repair and fleet key services for commercial trucks.
- Automotive Locksmith
Mobile key, lock and ignition service for cars, trucks, SUVs, vans, motorcycles and fleets.
1998 Honda CR-V keys near Pasadena
We make 1998 Honda CR-V keys in the communities around Pasadena as well. See the main 1998 Honda CR-V key replacement page or the Pasadena locksmith page.
- 1998 Honda CR-V keys in South Pasadena
- 1998 Honda CR-V keys in San Marino
- 1998 Honda CR-V keys in Altadena
- 1998 Honda CR-V keys in Alhambra
- 1998 Honda CR-V keys in San Gabriel
- 1998 Honda CR-V keys in La Cañada Flintridge
- 1998 Honda CR-V keys in Sierra Madre
- 1998 Honda CR-V keys in Temple City
- 1998 Honda CR-V keys in Monterey Park
- 1998 Honda CR-V keys in Rosemead
- 1998 Honda CR-V keys in Arcadia
- 1998 Honda CR-V keys in Glendale
1998 Honda CR-V key replacement in Pasadena: frequently asked questions
Does a 1998 Honda CR-V key need programming?
A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.
Can any hardware store copy my 1998 Honda CR-V key?
If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.
My Honda key turns in the door but not the ignition. Why?
The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.
What does the blinking green key light on my Honda dashboard mean?
The immobilizer is not recognizing the key’s transponder. The chip may be damaged, the key may be unprogrammed, or another chip key on the ring may be interfering.
Can I program a Honda key myself?
No. The immobilizer requires a diagnostic tool to register keys. Remote buttons on some older models can be paired by a manual sequence, but the chip cannot.
How much does a 1998 Honda CR-V key cost?
It depends on the key type for your exact trim and on whether you still have a working key. Call (562) 550-7206 with the year, make and model and we will give you a price range before sending anyone.
How many keys should I have for my 1998 Honda CR-V?
At least two. With two working keys you are never stranded, and on some makes two keys let you add another yourself.
Can you program a key I bought online for my 1998 Honda CR-V?
We can try, if it is the correct part. We test the chip and frequency first. Many low-cost online keys are the wrong type or locked to another car, so we cannot guarantee a customer-supplied key.
Do I have to tow my 1998 Honda CR-V to you?
No. We are a mobile service. The key machines and programming equipment are in the van, and the work is done where the vehicle is parked.
Do you also repair the ignition on a 1998 Honda CR-V?
Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.
Which parts of Pasadena do you serve?
All of Pasadena, including Old Pasadena, South Lake, the Playhouse Village, and Bungalow Heaven, and addresses in ZIP codes 91101, 91103, 91104, 91105, 91106, and 91107.
Are you open 24 hours in Pasadena?
Yes. We take calls and dispatch to Pasadena 24 hours a day, including weekends and holidays.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
