Skip to content
Big Daddy Car Key Replacement logo(562) 550-7206

Hummer Key Replacement in Pasadena, CA

Big Daddy Car Key Replacement makes Hummer keys on site in Pasadena. A mobile technician comes to the car, verifies ownership, cuts the key to factory code and programs it.

(562) 550-7206
  • Open 24 hours, every day
  • We come to you
  • Price range before we dispatch
Hummer Key Replacement in Pasadena, CA by Big Daddy Car Key Replacement

Quick answer

Big Daddy Car Key Replacement cuts and programs Hummer keys on site in Pasadena, CA, 24 hours a day, including transponder keys, remote head keys and smart keys where the vehicle uses them. Call (562) 550-7206 for a price range.

Last updated

Vehicle
Hummer
Model years covered
1990–2026
Models covered
3
Service area
Pasadena, CA
Hours
Open 24 hours, 7 days a week
Service type
Mobile, at your vehicle
Phone
(562) 550-7206
On this page

Hummer car keys made and programmed on site

Big Daddy Car Key Replacement cuts and programs Hummer keys in Pasadena for 3 models spanning model years 1990 to 2026. A mobile technician comes to the vehicle, verifies ownership, cuts the key to factory code and programs it to the car. The H2 and H3 share GM truck electronics of their era, so earlier models rely on Passlock and later ones on transponder keys. The military-derived H1 uses simple mechanical keys.

Hummer key replacement in Pasadena
Hummer keys are cut and programmed at the vehicle in Pasadena.

Hummer models we make keys for

Choose a model to see its key types by year and a page for every model year.

Types of Hummer keys

Transponder chip key

A transponder key looks like an ordinary key with a plastic head, but the head holds a tiny chip with no battery. When you turn the ignition, an antenna ring around the lock energizes the chip and asks for its code. If the immobilizer recognizes the answer, it lets the engine run. If not, the engine cranks without starting or starts and dies within seconds. For the Hummer we cut the blade to code, then program the chip. Where a working key exists, its data can often be cloned or used to authorize a new key quickly. When every key is lost, we connect to the car through the diagnostic port, obtain security access, and register new keys directly to the immobilizer.

Traditional metal key

A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy. For the Hummer we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank.

How Hummer key and immobilizer systems work

General Motors has used several anti-theft systems over the years. PASS-Key (VATS) keys from the late 1980s through the 1990s carry a visible resistor pellet that must match one of fifteen values. Passlock, common on trucks and compacts into the 2000s, uses a sensor in the ignition cylinder and an ordinary key. PASS-Key III and III+ use a transponder chip, and from about 2010 GM moved to laser-cut flip keys and then proximity fobs programmed through secured access.

Common Hummer key and lock problems

These are the issues we see most often on Hummer vehicles in Pasadena:

  • Passlock faults that leave a security light flashing and the engine disabled for ten minutes at a time
  • Worn ignition cylinders on trucks and SUVs that will not turn or will not release the key
  • Flip-key blades that loosen or snap at the hinge
  • Proximity fobs that stop being detected after a battery or module replacement

All keys lost or just need a spare?

How many keys you still have matters more than almost anything else. With one working key present, a second key can usually be copied or added in a short visit. With no keys at all, the technician must first work out the correct cuts, from the VIN or by decoding a lock, and then gain security access to the immobilizer so a new key can be registered. That all-keys-lost process is routine for us and is done on site, but it takes more time. If you are down to your last key, adding a spare today is far cheaper than replacing every key later.

Stranded with your Hummer right now?

Stuck without a working key? First make sure you are somewhere safe and visible. Think about whether a spare exists at home or with a family member. Then call (562) 550-7206 and give us the year, make, model, your location and whether the vehicle is locked or open. We will tell you the likely cost and how long a technician will take to reach you. For a child or pet locked inside, call 911 before anything else.

Hummer key replacement across Pasadena

Pasadena is an incorporated city in Los Angeles County, part of the San Gabriel Valley area we cover every day. Customers anywhere in Pasadena, including Old Pasadena, South Lake, the Playhouse Village, Bungalow Heaven, Linda Vista, Hastings Ranch, Madison Heights, and East Pasadena, can have a mobile technician sent directly to them. Service is available throughout ZIP codes 91101, 91103, 91104, 91105, 91106, and 91107.

Pasadena is famous for Craftsman architecture, and its landmark districts are full of original mortise locks and hand-fitted doors, alongside modern offices, labs and condos that need current commercial hardware.

If you are out and about near the Rose Bowl, Old Pasadena, Caltech, the Norton Simon Museum, or Pasadena City Hall, give us that location when you call and wait somewhere safe and visible. Technicians usually reach Pasadena by I-210, SR-134, SR-110, Colorado Boulevard, Lake Avenue, and Fair Oaks Avenue. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.

Getting a Hummer key made, step by step

  1. Call with the year, make and model

    Tell us you need a key for a Hummer, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.

  2. We verify ownership

    Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.

  3. We identify the exact key system

    Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.

  4. The key is cut to code

    The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.

  5. The key is programmed to the car

    For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.

  6. Everything is tested before we leave

    We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

Programming a Hummer key in Pasadena
Keys are programmed through the vehicle’s diagnostic port and tested before we leave.

What to have ready

  • A government-issued photo ID
  • The vehicle registration, title or current insurance card in your name
  • The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
  • Any remaining keys or remotes, including ones that no longer work
  • The vehicle itself, parked where a technician can open the driver’s door fully

Mobile locksmith or dealership for a Hummer key?

Mobile locksmithDealership
Where the work happensAt your vehicle, wherever it is parkedAt the dealer’s service department
Towing with all keys lostNot neededUsually required
AvailabilityOpen 24 hours, including weekends and holidaysService department business hours
Typical waitOften the same dayAppointment, plus time to order the key by VIN
Key optionsOEM or quality aftermarket where availableOEM only
Restricted late-model systemsSome require a dealer key; we tell you up frontSupported

A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.

What affects the cost of a Hummer key

Lock or ignition condition
If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
Whether a working key exists
Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
Time and location
Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
Model year and system generation
Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
Key technology
A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.

Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.

Lost keys and vehicle security

Whoever finds a lost key might find the car. During programming we can usually remove lost keys from the vehicle’s memory, which stops them starting the engine. That does not change the mechanical door lock, so if theft is a concern, the door cylinders can be rekeyed to a new cut as well.

Equipment we bring to the vehicle

Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.

Car key terms explained

VIN
The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
Diagnostic port
The connector under the dashboard through which keys are programmed to the vehicle’s computer.
Remote head key
A key with the lock and unlock buttons built into its head, alongside the blade and chip.
All keys lost
A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
Proximity key
A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
Transponder
A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
Immobilizer
The anti-theft system that prevents the engine from running unless it recognizes a programmed key.

Situations we are called to most often

  • A used car was sold with one worn key and no spare.
  • A hardware-store copy opens the door but the engine will not start.
  • The ignition will not turn and the key will not come out.
  • The key fob went through the washing machine.
  • The dash reads "key not detected" and the start button does nothing.

Why drivers in Pasadena choose Big Daddy

A price range before we dispatch
When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
Most jobs finished in one visit
Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
One company for home, business and vehicle
The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
Car key specialists
Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
A workshop that comes to you
Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
Open 24 hours, every day
Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Pasadena.
Hummer car key service in Pasadena
Big Daddy Car Key Replacement: mobile, open 24 hours.

Looking after your Hummer key

  • Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
  • Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
  • Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
  • When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
  • Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
  • Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
  • Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.

Choosing a car locksmith you can trust

  • Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
  • Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
  • Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
  • In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
  • Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.

Other makes

Hummer keys near Pasadena

We make Hummer keys in the communities around Pasadena as well. See the main Hummer key replacement page or the Pasadena locksmith page.

Hummer key replacement in Pasadena: frequently asked questions

Why is the security light flashing on my Hummer and the engine will not start?

The anti-theft system does not recognize the key or the ignition sensor signal. It may be a worn key, a failed Passlock sensor or an unprogrammed chip. We diagnose which and correct it; a relearn procedure is often part of the fix.

Can a Hummer key be programmed without going to the dealer?

Yes for the great majority of models. Older systems use an on-board relearn and newer ones need a diagnostic tool with security access, which we carry.

Is a locksmith-made Hummer key as good as a dealer key?

Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.

How many keys should I have for my Hummer?

At least two. With two working keys you are never stranded, and on some makes two keys let you add another yourself.

Will my lost Hummer key still start the car?

For chip and smart keys we can usually erase lost keys from the car’s memory during programming, so they no longer start the engine. A lost key could still open the door mechanically unless the locks are rekeyed.

Can you make a Hummer key at night or on a weekend?

Yes. We are open 24 hours, seven days a week, including holidays, which is when dealership parts and service departments are closed.

Do you also repair the ignition on a Hummer?

Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.

Can you program a key I bought online for my Hummer?

We can try, if it is the correct part. We test the chip and frequency first. Many low-cost online keys are the wrong type or locked to another car, so we cannot guarantee a customer-supplied key.

Can you make a key for a Hummer if I have lost every key?

In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.

Can you make car keys in Pasadena?

Yes. We cut and program car keys on site anywhere in Pasadena, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.

Is there a travel charge for Pasadena?

Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Pasadena, so you know the cost in advance.

How can I contact you other than by phone?

You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.

Is Big Daddy Car Key Replacement a mobile locksmith?

Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.

Call Now (562) 550-7206Open 24 hours · mobile locksmith