Quick answer
The 1990 Jeep Cherokee typically uses a traditional edge-cut metal key with no transponder chip. Big Daddy Car Key Replacement makes 1990 Jeep Cherokee keys on site in Pasadena, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 1990 Jeep Cherokee
- Typical key
- Traditional metal key
- Transponder chip
- No
- Blade
- Edge-cut
- Programming
- Not normally required
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 1990 Jeep Cherokee use?
- How we make a 1990 Jeep Cherokee key
- How Jeep key and immobilizer systems work
- Common Jeep key and lock problems
- All keys lost or just need a spare?
- Stranded with your Jeep right now?
- 1990 Jeep Cherokee key replacement across Pasadena
- Getting a 1990 Jeep Cherokee key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Jeep key?
- What affects the cost of a 1990 Jeep Cherokee key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers in Pasadena choose Big Daddy
- Looking after your Jeep key
- Choosing a car locksmith you can trust
- Other Jeep Cherokee years
- Other Jeep models
- Related automotive locksmith services in Pasadena
- 1990 Jeep Cherokee keys near Pasadena
- 1990 Jeep Cherokee key replacement in Pasadena: frequently asked questions
What kind of key does a 1990 Jeep Cherokee use?
The 1990 Jeep Cherokee typically uses a traditional edge-cut metal key with no transponder chip.
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

How we make a 1990 Jeep Cherokee key
For the 1990 Jeep Cherokee we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.
This page covers the 1990 model year. For other years, see the Jeep Cherokee key replacement overview, or browse all Jeep models.
How Jeep key and immobilizer systems work
Chrysler, Dodge, Jeep and Ram vehicles use the Sentry Key Immobilizer System. Early versions used a grey-headed transponder key, later ones the Fobik, a plastic pod that turns in the dash, and then Keyless Enter-N-Go proximity fobs. Programming requires the vehicle’s four-digit PIN. From the 2018 model year a Secure Gateway Module blocks unauthorized diagnostic access, so registered equipment is needed to program keys.
Jeep keys range from basic metal keys on older Wranglers to Sentry Key transponders, Fobik pod keys and proximity fobs. Wranglers are often driven with doors off, and lost keys on the trail or at the beach are a common call.
Common Jeep key and lock problems
These are the issues we see most often on Jeep vehicles in Pasadena:
- Fobik keys that are not recognized because of a worn wireless ignition node
- "Key not detected" messages on push-button models with a weak fob battery
- Lost keys on vehicles protected by the secure gateway, which defeats generic tools
- Worn door and ignition wafers on older Wranglers and Cherokees
All keys lost or just need a spare?
There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.
Stranded with your Jeep right now?
If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.
1990 Jeep Cherokee key replacement across Pasadena
Located in Los Angeles County, Pasadena is an incorporated city within our San Gabriel Valley service area. We cover every part of Pasadena, including Old Pasadena, South Lake, the Playhouse Village, Bungalow Heaven, Linda Vista, Hastings Ranch, Madison Heights, and East Pasadena. Wherever you are in town, the technician comes to your door, driveway or parking space. We serve the 91101, 91103, 91104, 91105, 91106, and 91107 ZIP codes.
Pasadena is famous for Craftsman architecture, and its landmark districts are full of original mortise locks and hand-fitted doors, alongside modern offices, labs and condos that need current commercial hardware.
People call us from all over Pasadena, including the areas around the Rose Bowl, Old Pasadena, Caltech, the Norton Simon Museum, and Pasadena City Hall. A landmark or cross street helps the technician reach you quickly. Depending on where the closest technician is, the drive into Pasadena follows I-210, SR-134, SR-110, Colorado Boulevard, Lake Avenue, and Fair Oaks Avenue. You get a realistic arrival estimate when you call.
Getting a 1990 Jeep Cherokee key made, step by step
Call with the year, make and model
Tell us you need a key for a 1990 Jeep Cherokee, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Jeep key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 1990 Jeep Cherokee key
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
- Immobilizer
- The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
- All keys lost
- A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
Situations we are called to most often
- The key is locked in the trunk and the trunk release is disabled.
- The ignition will not turn and the key will not come out.
- The key fob went through the washing machine.
- A used car was sold with one worn key and no spare.
- The dash reads "key not detected" and the start button does nothing.
Why drivers in Pasadena choose Big Daddy
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Pasadena.

Looking after your Jeep key
Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.
- Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
- If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
- Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
- When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
Choosing a car locksmith you can trust
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
Other Jeep Cherokee years
- 2023 Cherokee
- 2022 Cherokee
- 2021 Cherokee
- 2020 Cherokee
- 2019 Cherokee
- 2018 Cherokee
- 2017 Cherokee
- 2016 Cherokee
- 2015 Cherokee
- 2014 Cherokee
- 2001 Cherokee
- 2000 Cherokee
- 1999 Cherokee
- 1998 Cherokee
- 1997 Cherokee
- 1996 Cherokee
- 1995 Cherokee
- 1994 Cherokee
- 1993 Cherokee
- 1992 Cherokee
- 1991 Cherokee
Other Jeep models
- Jeep Wrangler keys
- Jeep Grand Cherokee keys
- Jeep Compass keys
- Jeep Liberty keys
- Jeep Patriot keys
- Jeep Renegade keys
- Jeep Gladiator keys
- Jeep Commander keys
- Jeep Grand Wagoneer keys
- Jeep Wagoneer keys
Related automotive locksmith services in Pasadena
- Car Lockout
Unlocking vehicles when keys are locked inside.
- Car Key Replacement
Replacing lost, stolen or damaged car keys.
- Broken Car Key Extraction
Removing broken keys from ignitions, door locks, trunks and glove boxes.
- Automotive Locksmith
Mobile key, lock and ignition service for cars, trucks, SUVs, vans, motorcycles and fleets.
- Key Fob Replacement
Replacing remote key fobs for cars, trucks, SUVs and vans.
- Semi-Truck Locksmith
Lockouts, key replacement, ignition repair and fleet key services for commercial trucks.
- Remote Head Key Replacement
Replacing keys with built-in remote buttons.
- Laser Cut Key
Cutting high-security sidewinder/laser-cut keys.
1990 Jeep Cherokee keys near Pasadena
We make 1990 Jeep Cherokee keys in the communities around Pasadena as well. See the main 1990 Jeep Cherokee key replacement page or the Pasadena locksmith page.
- 1990 Jeep Cherokee keys in South Pasadena
- 1990 Jeep Cherokee keys in San Marino
- 1990 Jeep Cherokee keys in Altadena
- 1990 Jeep Cherokee keys in Alhambra
- 1990 Jeep Cherokee keys in San Gabriel
- 1990 Jeep Cherokee keys in La Cañada Flintridge
- 1990 Jeep Cherokee keys in Sierra Madre
- 1990 Jeep Cherokee keys in Temple City
- 1990 Jeep Cherokee keys in Monterey Park
- 1990 Jeep Cherokee keys in Rosemead
- 1990 Jeep Cherokee keys in Arcadia
- 1990 Jeep Cherokee keys in Glendale
1990 Jeep Cherokee key replacement in Pasadena: frequently asked questions
Does a 1990 Jeep Cherokee key need programming?
A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.
Can any hardware store copy my 1990 Jeep Cherokee key?
If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.
My Jeep key turns in the door but not the ignition. Why?
The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.
Do I need a PIN code to program a Jeep key?
Yes. The immobilizer PIN is required for key programming. We retrieve it from the vehicle or through authorized channels after verifying ownership.
Can you program keys for a 2018 or newer Jeep with the secure gateway?
Yes. We use equipment registered for secure gateway access, so late-model vehicles can be programmed on site.
Is a locksmith-made Jeep key as good as a dealer key?
Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.
What do you need from me to make a 1990 Jeep Cherokee key?
A photo ID and proof that the vehicle is yours, such as registration, title or insurance, plus access to the vehicle. Having the VIN ready when you call speeds things up.
Can you unlock my 1990 Jeep Cherokee if the keys are inside?
Yes. We open vehicles without damage using air wedges and reach tools or by picking the door lock, at any hour.
Do I have to tow my 1990 Jeep Cherokee to you?
No. We are a mobile service. The key machines and programming equipment are in the van, and the work is done where the vehicle is parked.
Does car insurance cover a replacement Jeep key?
Some comprehensive policies, roadside plans and dealer key-protection plans do. Check your policy; we provide an itemized receipt you can submit.
Do you have a locksmith shop in Pasadena?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Pasadena and the rest of the San Gabriel Valley area. All work is done at your location.
Can you make car keys in Pasadena?
Yes. We cut and program car keys on site anywhere in Pasadena, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Which areas do you cover?
We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
