Quick answer
The 1995 Mitsubishi 3000GT typically uses a traditional edge-cut metal key with no transponder chip. Big Daddy Car Key Replacement makes 1995 Mitsubishi 3000GT keys on site in Pasadena, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 1995 Mitsubishi 3000GT
- Typical key
- Traditional metal key
- Transponder chip
- No
- Blade
- Edge-cut
- Programming
- Not normally required
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 1995 Mitsubishi 3000GT use?
- How we make a 1995 Mitsubishi 3000GT key
- How Mitsubishi key and immobilizer systems work
- Common Mitsubishi key and lock problems
- All keys lost or just need a spare?
- Stranded with your Mitsubishi right now?
- 1995 Mitsubishi 3000GT key replacement across Pasadena
- Getting a 1995 Mitsubishi 3000GT key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Mitsubishi key?
- What affects the cost of a 1995 Mitsubishi 3000GT key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers in Pasadena choose Big Daddy
- Looking after your Mitsubishi key
- Choosing a car locksmith you can trust
- Other Mitsubishi 3000GT years
- Other Mitsubishi models
- Related automotive locksmith services in Pasadena
- 1995 Mitsubishi 3000GT keys near Pasadena
- 1995 Mitsubishi 3000GT key replacement in Pasadena: frequently asked questions
What kind of key does a 1995 Mitsubishi 3000GT use?
The 1995 Mitsubishi 3000GT typically uses a traditional edge-cut metal key with no transponder chip.
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

How we make a 1995 Mitsubishi 3000GT key
For the 1995 Mitsubishi 3000GT we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.
This page covers the 1995 model year. For other years, see the Mitsubishi 3000GT key replacement overview, or browse all Mitsubishi models.
How Mitsubishi key and immobilizer systems work
Mitsubishi immobilizers register transponders in the engine computer or the ETACS body module. Programming needs a diagnostic tool and, on many models, a PIN. Remote functions are frequently programmed separately from the chip. The FAST-Key proximity system on later models is registered through the same port.
Mitsubishi phased in immobilizers from about 2000 and later offered the FAST-Key proximity system. Programming needs a PIN and, on some models, registration of each remote separately from the chip.
Common Mitsubishi key and lock problems
These are the issues we see most often on Mitsubishi vehicles in Pasadena:
- Remotes that stop working while the chip still starts the car
- Lost keys on models that need a PIN for programming
- FAST-Key fobs not detected with a weak battery
- Worn ignition cylinders on older Galant and Eclipse models
All keys lost or just need a spare?
There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.
Stranded with your Mitsubishi right now?
If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.
1995 Mitsubishi 3000GT key replacement across Pasadena
Located in Los Angeles County, Pasadena is an incorporated city within our San Gabriel Valley service area. We cover every part of Pasadena, including Old Pasadena, South Lake, the Playhouse Village, Bungalow Heaven, Linda Vista, Hastings Ranch, Madison Heights, and East Pasadena. Wherever you are in town, the technician comes to your door, driveway or parking space. We serve the 91101, 91103, 91104, 91105, 91106, and 91107 ZIP codes.
Pasadena is famous for Craftsman architecture, and its landmark districts are full of original mortise locks and hand-fitted doors, alongside modern offices, labs and condos that need current commercial hardware.
People call us from all over Pasadena, including the areas around the Rose Bowl, Old Pasadena, Caltech, the Norton Simon Museum, and Pasadena City Hall. A landmark or cross street helps the technician reach you quickly. Depending on where the closest technician is, the drive into Pasadena follows I-210, SR-134, SR-110, Colorado Boulevard, Lake Avenue, and Fair Oaks Avenue. You get a realistic arrival estimate when you call.
Getting a 1995 Mitsubishi 3000GT key made, step by step
Call with the year, make and model
Tell us you need a key for a 1995 Mitsubishi 3000GT, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Mitsubishi key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 1995 Mitsubishi 3000GT key
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- Immobilizer
- The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
- All keys lost
- A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
Situations we are called to most often
- A used car was sold with one worn key and no spare.
- The key fob went through the washing machine.
- The only key to the car is lost somewhere between the beach, the restaurant and home.
- The ignition will not turn and the key will not come out.
- The key is locked in the trunk and the trunk release is disabled.
Why drivers in Pasadena choose Big Daddy
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Pasadena.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.

Looking after your Mitsubishi key
Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.
- Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
- When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
- Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
- If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
Choosing a car locksmith you can trust
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Get an itemized receipt showing labor, parts and the business details.
Other Mitsubishi 3000GT years
Other Mitsubishi models
- Mitsubishi Mirage keys
- Mitsubishi Outlander keys
- Mitsubishi Eclipse keys
- Mitsubishi Galant keys
- Mitsubishi Montero keys
- Mitsubishi Lancer keys
- Mitsubishi Outlander Sport keys
- Mitsubishi Diamante keys
- Mitsubishi Eclipse Cross keys
- Mitsubishi Endeavor keys
- Mitsubishi Montero Sport keys
- Mitsubishi Raider keys
Related automotive locksmith services in Pasadena
- Car Door Lock Repair
Repairing vehicle door lock cylinders and mechanisms.
- Car Key Cutting
Cutting standard, high-security and laser-cut automotive keys.
- Car Locksmith
On-site car key, lockout and ignition help wherever the vehicle is parked.
- Push-to-Start Key Programming
Programming proximity keys for push-button ignition vehicles.
- Broken Car Key Extraction
Removing broken keys from ignitions, door locks, trunks and glove boxes.
- Car Key Replacement
Replacing lost, stolen or damaged car keys.
- Ignition Key Replacement
Making replacement keys for vehicle ignitions.
- Ignition Repair
Repairing ignition cylinders that are stuck, worn or will not turn.
1995 Mitsubishi 3000GT keys near Pasadena
We make 1995 Mitsubishi 3000GT keys in the communities around Pasadena as well. See the main 1995 Mitsubishi 3000GT key replacement page or the Pasadena locksmith page.
- 1995 Mitsubishi 3000GT keys in South Pasadena
- 1995 Mitsubishi 3000GT keys in San Marino
- 1995 Mitsubishi 3000GT keys in Altadena
- 1995 Mitsubishi 3000GT keys in Alhambra
- 1995 Mitsubishi 3000GT keys in San Gabriel
- 1995 Mitsubishi 3000GT keys in La Cañada Flintridge
- 1995 Mitsubishi 3000GT keys in Sierra Madre
- 1995 Mitsubishi 3000GT keys in Temple City
- 1995 Mitsubishi 3000GT keys in Monterey Park
- 1995 Mitsubishi 3000GT keys in Rosemead
- 1995 Mitsubishi 3000GT keys in Arcadia
- 1995 Mitsubishi 3000GT keys in Glendale
1995 Mitsubishi 3000GT key replacement in Pasadena: frequently asked questions
Does a 1995 Mitsubishi 3000GT key need programming?
A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.
Can any hardware store copy my 1995 Mitsubishi 3000GT key?
If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.
My Mitsubishi key turns in the door but not the ignition. Why?
The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.
Can you program a key for my Mitsubishi?
Yes for most models. We cut the key, program the transponder and pair the remote on site.
Why does my Mitsubishi remote not work after the key was programmed?
The remote and the transponder are separate systems on many Mitsubishis. The remote needs its own registration step.
Does car insurance cover a replacement Mitsubishi key?
Some comprehensive policies, roadside plans and dealer key-protection plans do. Check your policy; we provide an itemized receipt you can submit.
Do you also repair the ignition on a 1995 Mitsubishi 3000GT?
Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.
What do you need from me to make a 1995 Mitsubishi 3000GT key?
A photo ID and proof that the vehicle is yours, such as registration, title or insurance, plus access to the vehicle. Having the VIN ready when you call speeds things up.
Do I have to tow my 1995 Mitsubishi 3000GT to you?
No. We are a mobile service. The key machines and programming equipment are in the van, and the work is done where the vehicle is parked.
Can you unlock my 1995 Mitsubishi 3000GT if the keys are inside?
Yes. We open vehicles without damage using air wedges and reach tools or by picking the door lock, at any hour.
Are you open 24 hours in Pasadena?
Yes. We take calls and dispatch to Pasadena 24 hours a day, including weekends and holidays.
Which parts of Pasadena do you serve?
All of Pasadena, including Old Pasadena, South Lake, the Playhouse Village, and Bungalow Heaven, and addresses in ZIP codes 91101, 91103, 91104, 91105, 91106, and 91107.
Which areas do you cover?
We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
