Skip to content
Big Daddy Car Key Replacement logo(562) 550-7206

Hummer H2 Key Replacement in Pico Rivera, CA

Lost or broken Hummer H2 key? Big Daddy Car Key Replacement cuts and programs a new one at your vehicle in Pico Rivera, 24 hours a day. No tow and no dealer appointment.

(562) 550-7206
  • Open 24 hours, every day
  • We come to you
  • Price range before we dispatch
Hummer H2 Key Replacement in Pico Rivera, CA by Big Daddy Car Key Replacement

Quick answer

Big Daddy Car Key Replacement cuts and programs Hummer H2 keys on site in Pico Rivera, CA, 24 hours a day, including transponder keys, remote head keys and smart keys where the vehicle uses them. Call (562) 550-7206 for a price range.

Last updated

Vehicle
Hummer H2
Model years covered
2003–2009
Service area
Pico Rivera, CA
Hours
Open 24 hours, 7 days a week
Service type
Mobile, at your vehicle
Phone
(562) 550-7206
On this page

Hummer H2 keys made and programmed on site

The Hummer H2 was sold in the United States for model years 2003–2009, and its key technology changed along the way. We make keys for every one of those years in Pico Rivera: cut to factory code, programmed to the immobilizer where the car has one, and tested before we leave. The H2 and H3 share GM truck electronics of their era, so earlier models rely on Passlock and later ones on transponder keys. The military-derived H1 uses simple mechanical keys.

Hummer H2 key replacement in Pico Rivera
Hummer H2 keys are cut and programmed at the vehicle in Pico Rivera.

Hummer H2 key types by model year

The table shows the key most Hummer H2 models left the factory with in each period. Trim levels and options vary, so we always confirm against your vehicle and VIN.

Typical factory key equipment for the Hummer H2.
Model yearsTypical keyTransponder chipBlade
2003–2007Traditional metal keyNoEdge-cut
2008–2009Transponder chip keyYes on most; varies by trimEdge-cut

Choose your Hummer H2 year

Select a model year for the exact key type, programming method and what to expect.

Types of Hummer H2 keys

Transponder chip key

A transponder key looks like an ordinary key with a plastic head, but the head holds a tiny chip with no battery. When you turn the ignition, an antenna ring around the lock energizes the chip and asks for its code. If the immobilizer recognizes the answer, it lets the engine run. If not, the engine cranks without starting or starts and dies within seconds. For the Hummer H2 we cut the blade to code, then program the chip. Where a working key exists, its data can often be cloned or used to authorize a new key quickly. When every key is lost, we connect to the car through the diagnostic port, obtain security access, and register new keys directly to the immobilizer.

Traditional metal key

A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy. For the Hummer H2 we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank.

How Hummer key and immobilizer systems work

General Motors has used several anti-theft systems over the years. PASS-Key (VATS) keys from the late 1980s through the 1990s carry a visible resistor pellet that must match one of fifteen values. Passlock, common on trucks and compacts into the 2000s, uses a sensor in the ignition cylinder and an ordinary key. PASS-Key III and III+ use a transponder chip, and from about 2010 GM moved to laser-cut flip keys and then proximity fobs programmed through secured access.

Common Hummer key and lock problems

These are the issues we see most often on Hummer vehicles in Pico Rivera:

  • Passlock faults that leave a security light flashing and the engine disabled for ten minutes at a time
  • Worn ignition cylinders on trucks and SUVs that will not turn or will not release the key
  • Flip-key blades that loosen or snap at the hinge
  • Proximity fobs that stop being detected after a battery or module replacement

All keys lost or just need a spare?

How many keys you still have matters more than almost anything else. With one working key present, a second key can usually be copied or added in a short visit. With no keys at all, the technician must first work out the correct cuts, from the VIN or by decoding a lock, and then gain security access to the immobilizer so a new key can be registered. That all-keys-lost process is routine for us and is done on site, but it takes more time. If you are down to your last key, adding a spare today is far cheaper than replacing every key later.

Stranded with your Hummer right now?

Stuck without a working key? First make sure you are somewhere safe and visible. Think about whether a spare exists at home or with a family member. Then call (562) 550-7206 and give us the year, make, model, your location and whether the vehicle is locked or open. We will tell you the likely cost and how long a technician will take to reach you. For a child or pet locked inside, call 911 before anything else.

Hummer H2 key replacement across Pico Rivera

Pico Rivera is an incorporated city in Los Angeles County, part of the Gateway Cities area we cover every day. Our Hummer key replacement service reaches all of Pico Rivera, including the Whittier Boulevard corridor, the Rosemead Boulevard corridor, the Washington Boulevard corridor, and the Rivera district, as well as the streets in between. You do not need to bring anything to a shop. That includes addresses in ZIP code 90660.

Pico Rivera lies between two rivers with solid 1950s neighborhoods and major retail centers, where homeowners often replace decades-old locks and add deadbolts to side and garage doors.

If you are out and about near the Pico Rivera Sports Arena, Pico Rivera Towne Center, Smith Park, or the Rio Hondo and San Gabriel River greenways, give us that location when you call and wait somewhere safe and visible. Technicians usually reach Pico Rivera by I-5, I-605, Whittier Boulevard, Rosemead Boulevard, Washington Boulevard, and Slauson Avenue. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.

Getting a Hummer H2 key made, step by step

  1. Call with the year, make and model

    Tell us you need a key for a Hummer H2, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.

  2. We verify ownership

    Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.

  3. We identify the exact key system

    Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.

  4. The key is cut to code

    The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.

  5. The key is programmed to the car

    For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.

  6. Everything is tested before we leave

    We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

Programming a Hummer H2 key in Pico Rivera
Keys are programmed through the vehicle’s diagnostic port and tested before we leave.

What to have ready

  • A government-issued photo ID
  • The vehicle registration, title or current insurance card in your name
  • The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
  • Any remaining keys or remotes, including ones that no longer work
  • The vehicle itself, parked where a technician can open the driver’s door fully

Mobile locksmith or dealership for a Hummer key?

Mobile locksmithDealership
Where the work happensAt your vehicle, wherever it is parkedAt the dealer’s service department
Towing with all keys lostNot neededUsually required
AvailabilityOpen 24 hours, including weekends and holidaysService department business hours
Typical waitOften the same dayAppointment, plus time to order the key by VIN
Key optionsOEM or quality aftermarket where availableOEM only
Restricted late-model systemsSome require a dealer key; we tell you up frontSupported

A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.

What affects the cost of a Hummer H2 key

Lock or ignition condition
If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
Time and location
Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
Whether a working key exists
Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
Model year and system generation
Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
Key technology
A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.

Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.

Lost keys and vehicle security

Whoever finds a lost key might find the car. During programming we can usually remove lost keys from the vehicle’s memory, which stops them starting the engine. That does not change the mechanical door lock, so if theft is a concern, the door cylinders can be rekeyed to a new cut as well.

Equipment we bring to the vehicle

Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.

Car key terms explained

Key code
A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
Transponder
A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
VIN
The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
Proximity key
A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
Remote head key
A key with the lock and unlock buttons built into its head, alongside the blade and chip.
All keys lost
A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
Immobilizer
The anti-theft system that prevents the engine from running unless it recognizes a programmed key.

Situations we are called to most often

  • The only key to the car is lost somewhere between the beach, the restaurant and home.
  • A used car was sold with one worn key and no spare.
  • The key fob went through the washing machine.
  • A hardware-store copy opens the door but the engine will not start.
  • The dash reads "key not detected" and the start button does nothing.

Why drivers in Pico Rivera choose Big Daddy

Most jobs finished in one visit
Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
Non-destructive methods first
Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
Open 24 hours, every day
Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Pico Rivera.
A workshop that comes to you
Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
Plain explanations
We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
Car key specialists
Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
Hummer car key service in Pico Rivera
Big Daddy Car Key Replacement: mobile, open 24 hours.

Looking after your Hummer key

  • Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
  • When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
  • Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
  • Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
  • If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
  • Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
  • Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.

Choosing a car locksmith you can trust

  • Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
  • Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
  • Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
  • Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
  • Get an itemized receipt showing labor, parts and the business details.

Other Hummer models

Hummer H2 keys near Pico Rivera

We make Hummer H2 keys in the communities around Pico Rivera as well. See the main Hummer H2 key replacement page or the Pico Rivera locksmith page.

Hummer H2 key replacement in Pico Rivera: frequently asked questions

Why is the security light flashing on my Hummer and the engine will not start?

The anti-theft system does not recognize the key or the ignition sensor signal. It may be a worn key, a failed Passlock sensor or an unprogrammed chip. We diagnose which and correct it; a relearn procedure is often part of the fix.

Can a Hummer key be programmed without going to the dealer?

Yes for the great majority of models. Older systems use an on-board relearn and newer ones need a diagnostic tool with security access, which we carry.

Do I have to tow my Hummer H2 to you?

No. We are a mobile service. The key machines and programming equipment are in the van, and the work is done where the vehicle is parked.

How many keys should I have for my Hummer H2?

At least two. With two working keys you are never stranded, and on some makes two keys let you add another yourself.

Will my lost Hummer H2 key still start the car?

For chip and smart keys we can usually erase lost keys from the car’s memory during programming, so they no longer start the engine. A lost key could still open the door mechanically unless the locks are rekeyed.

Can you unlock my Hummer H2 if the keys are inside?

Yes. We open vehicles without damage using air wedges and reach tools or by picking the door lock, at any hour.

What do you need from me to make a Hummer H2 key?

A photo ID and proof that the vehicle is yours, such as registration, title or insurance, plus access to the vehicle. Having the VIN ready when you call speeds things up.

Can you program a key I bought online for my Hummer H2?

We can try, if it is the correct part. We test the chip and frequency first. Many low-cost online keys are the wrong type or locked to another car, so we cannot guarantee a customer-supplied key.

Do you also repair the ignition on a Hummer H2?

Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.

Is there a travel charge for Pico Rivera?

Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Pico Rivera, so you know the cost in advance.

Can you make car keys in Pico Rivera?

Yes. We cut and program car keys on site anywhere in Pico Rivera, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.

How can I contact you other than by phone?

You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.

Which areas do you cover?

We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.

Call Now (562) 550-7206Open 24 hours · mobile locksmith