Quick answer
The 1997 Nissan Maxima typically uses a traditional edge-cut metal key with no transponder chip. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting. Big Daddy Car Key Replacement makes 1997 Nissan Maxima keys on site in Pico Rivera, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 1997 Nissan Maxima
- Typical key
- Traditional metal key
- Transponder chip
- Usually no; varies
- Blade
- Edge-cut
- Programming
- Not normally required
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 1997 Nissan Maxima use?
- How we make a 1997 Nissan Maxima key
- How Nissan key and immobilizer systems work
- Common Nissan key and lock problems
- All keys lost or just need a spare?
- Stranded with your Nissan right now?
- 1997 Nissan Maxima key replacement across Pico Rivera
- Getting a 1997 Nissan Maxima key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Nissan key?
- What affects the cost of a 1997 Nissan Maxima key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers in Pico Rivera choose Big Daddy
- Looking after your Nissan key
- Choosing a car locksmith you can trust
- Other Nissan Maxima years
- Other Nissan models
- Related automotive locksmith services in Pico Rivera
- 1997 Nissan Maxima keys near Pico Rivera
- 1997 Nissan Maxima key replacement in Pico Rivera: frequently asked questions
What kind of key does a 1997 Nissan Maxima use?
The 1997 Nissan Maxima typically uses a traditional edge-cut metal key with no transponder chip. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting.
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

How we make a 1997 Nissan Maxima key
For the 1997 Nissan Maxima we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.
This page covers the 1997 model year. For other years, see the Nissan Maxima key replacement overview, or browse all Nissan models.
How Nissan key and immobilizer systems work
Nissan and Infiniti use NATS, the Nissan Anti-Theft System, with a transponder registered in the immobilizer or body control module. The Intelligent Key added proximity entry and, from the late 2000s, push-button start. Programming requires a PIN that is calculated from a code read out of the body control module, and newer models use rolling 20-digit codes that need current equipment.
Nissan’s NATS immobilizer spread across the lineup around 2000, and the Intelligent Key followed in the mid-2000s. Every Altima since 2007 has push-button start, making it one of the most common smart-key cars on the road.
Common Nissan key and lock problems
These are the issues we see most often on Nissan vehicles in Pico Rivera:
- Steering lock (ESCL) failures on some push-button models that prevent starting
- Intelligent Keys that are not detected when the fob battery is weak
- Twist-knob ignitions that will not turn without a recognized key
- Body control module problems that erase programmed keys
All keys lost or just need a spare?
There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.
Stranded with your Nissan right now?
If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.
1997 Nissan Maxima key replacement across Pico Rivera
Located in Los Angeles County, Pico Rivera is an incorporated city within our Gateway Cities service area. We cover every part of Pico Rivera, including the Whittier Boulevard corridor, the Rosemead Boulevard corridor, the Washington Boulevard corridor, and the Rivera district. Wherever you are in town, the technician comes to your door, driveway or parking space. That includes addresses in ZIP code 90660.
Pico Rivera lies between two rivers with solid 1950s neighborhoods and major retail centers, where homeowners often replace decades-old locks and add deadbolts to side and garage doors.
Whether you are at home, at work, or stuck near the Pico Rivera Sports Arena, Pico Rivera Towne Center, Smith Park, or the Rio Hondo and San Gabriel River greenways, tell the dispatcher the nearest landmark and we will find you. Technicians usually reach Pico Rivera by I-5, I-605, Whittier Boulevard, Rosemead Boulevard, Washington Boulevard, and Slauson Avenue. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
Getting a 1997 Nissan Maxima key made, step by step
Call with the year, make and model
Tell us you need a key for a 1997 Nissan Maxima, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Nissan key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 1997 Nissan Maxima key
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- Immobilizer
- The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
Situations we are called to most often
- A used car was sold with one worn key and no spare.
- The only key to the car is lost somewhere between the beach, the restaurant and home.
- The key fob went through the washing machine.
- The ignition will not turn and the key will not come out.
- The key is locked in the trunk and the trunk release is disabled.
Why drivers in Pico Rivera choose Big Daddy
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Pico Rivera.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.

Looking after your Nissan key
Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.
- Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
- Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
- Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
- Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
Choosing a car locksmith you can trust
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Get an itemized receipt showing labor, parts and the business details.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
Other Nissan Maxima years
- 2023 Maxima
- 2022 Maxima
- 2021 Maxima
- 2020 Maxima
- 2019 Maxima
- 2018 Maxima
- 2017 Maxima
- 2016 Maxima
- 2015 Maxima
- 2014 Maxima
- 2013 Maxima
- 2012 Maxima
- 2011 Maxima
- 2010 Maxima
- 2009 Maxima
- 2008 Maxima
- 2007 Maxima
- 2006 Maxima
- 2005 Maxima
- 2004 Maxima
- 2003 Maxima
- 2002 Maxima
- 2001 Maxima
- 2000 Maxima
- 1999 Maxima
- 1998 Maxima
- 1996 Maxima
- 1995 Maxima
- 1994 Maxima
- 1993 Maxima
- 1992 Maxima
- 1991 Maxima
- 1990 Maxima
Other Nissan models
- Nissan Pathfinder keys
- Nissan Sentra keys
- Nissan Altima keys
- Nissan Frontier keys
- Nissan Quest keys
- Nissan Murano keys
- Nissan Armada keys
- Nissan Titan keys
- Nissan Versa keys
- Nissan Rogue keys
- Nissan GT-R keys
- Nissan Leaf keys
- Nissan Xterra keys
Related automotive locksmith services in Pico Rivera
- Laser Cut Key
Cutting high-security sidewinder/laser-cut keys.
- Key Fob Programming
Programming new or replacement key fobs.
- Car Key Replacement
Replacing lost, stolen or damaged car keys.
- Ignition Key Replacement
Making replacement keys for vehicle ignitions.
- Scooter Key Replacement
Making replacement keys for scooters and small vehicles.
- Semi-Truck Locksmith
Lockouts, key replacement, ignition repair and fleet key services for commercial trucks.
- Spare Car Key
Creating duplicate or backup keys.
- Car Door Lock Repair
Repairing vehicle door lock cylinders and mechanisms.
1997 Nissan Maxima keys near Pico Rivera
We make 1997 Nissan Maxima keys in the communities around Pico Rivera as well. See the main 1997 Nissan Maxima key replacement page or the Pico Rivera locksmith page.
- 1997 Nissan Maxima keys in Montebello
- 1997 Nissan Maxima keys in Santa Fe Springs
- 1997 Nissan Maxima keys in Bell Gardens
- 1997 Nissan Maxima keys in Downey
- 1997 Nissan Maxima keys in Whittier
- 1997 Nissan Maxima keys in Commerce
- 1997 Nissan Maxima keys in Maywood
- 1997 Nissan Maxima keys in East Los Angeles
- 1997 Nissan Maxima keys in Bell
- 1997 Nissan Maxima keys in Cudahy
- 1997 Nissan Maxima keys in South El Monte
- 1997 Nissan Maxima keys in Norwalk
1997 Nissan Maxima key replacement in Pico Rivera: frequently asked questions
Does a 1997 Nissan Maxima key need programming?
A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.
Can any hardware store copy my 1997 Nissan Maxima key?
If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.
My Nissan key turns in the door but not the ignition. Why?
The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.
My Nissan says "No Key Detected". What should I do?
Replace the fob battery, then hold the fob against the start button while pressing it. If the car still does not respond, the fob, the antenna or the steering lock may be at fault, and we can test each.
Do all keys have to be present when programming a Nissan?
Yes on most models. Programming re-registers every key, and any key not present is erased from the system.
Will my lost 1997 Nissan Maxima key still start the car?
For chip and smart keys we can usually erase lost keys from the car’s memory during programming, so they no longer start the engine. A lost key could still open the door mechanically unless the locks are rekeyed.
Do you also repair the ignition on a 1997 Nissan Maxima?
Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.
Can you program a key I bought online for my 1997 Nissan Maxima?
We can try, if it is the correct part. We test the chip and frequency first. Many low-cost online keys are the wrong type or locked to another car, so we cannot guarantee a customer-supplied key.
Does car insurance cover a replacement Nissan key?
Some comprehensive policies, roadside plans and dealer key-protection plans do. Check your policy; we provide an itemized receipt you can submit.
How many keys should I have for my 1997 Nissan Maxima?
At least two. With two working keys you are never stranded, and on some makes two keys let you add another yourself.
How long does it take a locksmith to reach me in Pico Rivera?
It depends on where the nearest technician is and on traffic along I-5, I-605, or Whittier Boulevard. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Which parts of Pico Rivera do you serve?
All of Pico Rivera, including the Whittier Boulevard corridor, the Rosemead Boulevard corridor, the Washington Boulevard corridor, and the Rivera district, and addresses in ZIP code 90660.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
Which areas do you cover?
We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
