Quick answer
Electric Strike Installation: Installing electric strikes for buzz-in entry systems. Big Daddy Car Key Replacement provides electric strike installation service in Pico Rivera as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Electric Strike Installation
- Area
- Pico Rivera, Los Angeles County, CA (90660)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Access Control & Electronic Lock Services
- Phone
- (562) 550-7206
On this page
- What electric strike installation means
- Who uses this service
- Signs you need electric strike installation service
- Electric Strike Installation across Pico Rivera
- How our electric strike installation service works
- Common situations in Pico Rivera
- Tools, parts and hardware we carry
- A short glossary
- What affects the cost of electric strike installation service
- What you can expect from us
- Practical advice from our locksmiths
- Why this is a job for a locksmith
- Our service standards
- Choosing a locksmith: a short checklist
- What to have ready when you call
- Once the work is done
- Related locksmith services in Pico Rivera
- Electric Strike Installation near Pico Rivera
- Electric Strike Installation in Pico Rivera: frequently asked questions
What electric strike installation means
Installing electric strikes for buzz-in entry systems. An electric strike replaces the fixed strike in the frame with one whose keeper releases electrically, letting the door be pushed open while the lock stays locked. It works with your existing lockset or exit device, keeps the door latched during a power loss when set fail-secure, and is the standard choice for buzz-in doors.

A smart lock or access system is only as good as its installation. The door must be aligned, the hardware matched to the opening, and the software configured with sensible codes and permissions. Our electric strike installation service in Pico Rivera takes care of each part and shows you how to use it.
Who uses this service
Electronic lock and access control customers in Pico Rivera range from households that want to stop hiding keys, to short-term rental hosts issuing guest codes, to offices, clinics, gyms, apartment buildings and warehouses that need to control and record who enters.
This service is part of our access control & electronic lock services in Pico Rivera.
Signs you need electric strike installation service
These are the most common reasons customers in Pico Rivera ask for electric strike installation service:
- You want to buzz visitors in from a desk
- An access system is being added to an existing lock
- The door must stay locked if power fails
- A panic-bar door needs electric release
Electric Strike Installation across Pico Rivera
Located in Los Angeles County, Pico Rivera is an incorporated city within our Gateway Cities service area. We cover every part of Pico Rivera, including the Whittier Boulevard corridor, the Rosemead Boulevard corridor, the Washington Boulevard corridor, and the Rivera district. Wherever you are in town, the technician comes to your door, driveway or parking space. Service is available throughout ZIP code 90660.
Pico Rivera lies between two rivers with solid 1950s neighborhoods and major retail centers, where homeowners often replace decades-old locks and add deadbolts to side and garage doors.
People call us from all over Pico Rivera, including the areas around the Pico Rivera Sports Arena, Pico Rivera Towne Center, Smith Park, and the Rio Hondo and San Gabriel River greenways. A landmark or cross street helps the technician reach you quickly. Depending on where the closest technician is, the drive into Pico Rivera follows I-5, I-605, Whittier Boulevard, Rosemead Boulevard, Washington Boulevard, and Slauson Avenue. You get a realistic arrival estimate when you call.
How our electric strike installation service works
Discuss how the door is used
Who needs access, how often people change, whether remote control or an entry log is needed, and what the door is made of all shape the right choice.
Check the door and the site
We measure door thickness, backset and bore, check alignment and weather exposure, and for networked products test Wi-Fi strength at the door or plan the wiring.
Recommend equipment
You get a recommendation with the trade-offs explained: keypad or app, Bluetooth or Wi-Fi, standalone or networked, and the cost of each.
Install the hardware
The door is aligned so the bolt moves freely, then the lock, reader, strike or maglock is fitted to the manufacturer’s template and wired or powered.
Program users and settings
Default codes are removed, individual users are created, schedules and auto-lock are set, and firmware is updated.
Train and document
We walk you through adding and deleting users, changing batteries and using the mechanical override, and leave the settings documented.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Common situations in Pico Rivera
- A business needs to know who entered the stockroom and when.
- A homeowner wants to let a contractor in while at work.
- A short-term rental needs a new code for every guest.
- Children get home from school before their parents and keep losing keys.
- A smart lock reports "jammed" every evening when the door swells.
- An apartment building wants to replace a shared entry key with fobs.
- An office wants to stop rekeying each time an employee leaves.
Tools, parts and hardware we carry
We install and service keypad and smart deadbolts and levers from the major residential makers such as Schlage, Yale, Kwikset and August, and commercial electronic locks and access components including standalone keypad levers, card and fob readers, controllers, electric strikes, electromagnetic locks, request-to-exit sensors, push-to-exit buttons, power supplies with battery backup and door position switches. Matching each component to the door is what makes a system reliable.
A short glossary
- Request to exit
- A sensor or button that releases an electrically locked door for someone leaving.
- Smart lock
- A lock that can be operated by a code, phone or other credential, often with remote control.
- Audit trail
- A stored record of which credential opened a door and when.
- Access control
- A system that decides who may pass through which door at what time, and records each entry.
- Maglock
- An electromagnetic lock that holds a door closed with a magnet and releases when power is cut.
- Fail-safe and fail-secure
- A fail-safe lock unlocks when power is lost; a fail-secure lock stays locked.
- Electric strike
- A strike plate with a keeper that releases electrically so a locked door can be pushed open.
- Credential
- Whatever identifies a user: a card, fob, PIN, phone or fingerprint.
What affects the cost of electric strike installation service
- Type of system
- A standalone keypad lock is the least expensive. Smart locks cost more, and wired access control with readers and controllers the most.
- Life-safety requirements
- Maglocks and controlled exits need release devices and sometimes fire alarm connections to meet code.
- Grade of hardware
- Commercial Grade 1 electronic locks cost more than residential models and are built for far heavier use.
- Number of doors
- Each controlled door needs its own lock hardware and, for wired systems, cabling back to a controller.
- Wiring and power
- Running cable, adding power supplies and battery backup takes time, especially in finished buildings.
- Door condition
- Doors that bind must be corrected first. Motorized locks cannot overcome friction that a hand can.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
What you can expect from us
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.

Practical advice from our locksmiths
- Delete factory default codes on the day of installation.
- Keep firmware up to date. Updates often fix security issues.
- Check that the door closes and latches on its own. Auto-lock cannot secure a door that is ajar.
- Give each person their own code or credential so access can be removed individually.
- Wipe touchscreens occasionally so smudges do not reveal the digits in your code.
- Turn on two-factor authentication for any account that can unlock your door.
- Use fresh, name-brand alkaline batteries. Many locks misread rechargeable cells.
- Review the user list every few months and remove anyone who no longer needs access.
Why this is a job for a locksmith
Most complaints about electronic locks trace back to installation: a door out of alignment, a strike that pinches the bolt, a Wi-Fi bridge out of range, default codes left active, or a maglock installed without the release devices the code requires. A locksmith addresses the mechanical side first, then the electronics, and leaves a system that works every day and still lets people out safely when power is lost.
Our service standards
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
Choosing a locksmith: a short checklist
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Get an itemized receipt showing labor, parts and the business details.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
What to have ready when you call
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Once the work is done
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Pico Rivera
Customers who need electric strike installation service often ask about these as well. Each can usually be handled in the same visit to Pico Rivera.
- Smart Locks & Keyless Entry
Smart locks, keypad deadbolts and keyless entry systems supplied, installed and set up.
- Audit Trail Lock Systems
Installing locks that track access history.
- Keypad Lock Installation
Installing keypad deadbolts, digital door locks and electronic entry locks.
- Key Fob Access Systems
Installing and programming key fob systems.
- Smart Lock Setup
Programming smart locks, connecting apps, setting user codes, deleting old codes and troubleshooting connectivity.
- Bluetooth Lock Installation
Installing Bluetooth-enabled locks.
- User Access Management
Setting up different codes for employees, tenants, contractors, family members or guests.
- Keyless Entry Installation
Installing keyless entry systems for doors and gates.
- Buzzer System Installation
Installing entry buzzers for offices, apartments and secured entrances.
- Access Control Installation
Installing electronic access systems for offices, warehouses, apartment buildings and commercial facilities.
- High Security Locks
Locks engineered to resist picking, bumping, drilling and unauthorized key copying.
- Broken Key Extraction
Removing broken keys from door locks, deadbolts, mailbox locks, gates and other lock cylinders.
- 24 Hour Locksmith
Locksmith help day or night, every day of the year.
- Emergency Locksmith
Urgent lock and key help for homes, businesses and vehicles at any hour.
- Storefront Lock Repair
Repairing locks on glass storefront doors, aluminum doors and commercial entryways.
Electric Strike Installation near Pico Rivera
We provide the same electric strike installation service in the communities around Pico Rivera. See the main electric strike installation page or the full list of service areas.
- Electric Strike Installation in Montebello
- Electric Strike Installation in Santa Fe Springs
- Electric Strike Installation in Bell Gardens
- Electric Strike Installation in Downey
- Electric Strike Installation in Whittier
- Electric Strike Installation in Commerce
- Electric Strike Installation in Maywood
- Electric Strike Installation in East Los Angeles
- Electric Strike Installation in Bell
- Electric Strike Installation in Cudahy
- Electric Strike Installation in South El Monte
- Electric Strike Installation in Norwalk
Electric Strike Installation in Pico Rivera: frequently asked questions
What is the difference between an electric strike and a maglock?
An electric strike releases the latch of a normal lock and can stay locked without power. A maglock holds the door with a magnet and always unlocks when power is lost.
How many users can an electronic lock hold?
Residential keypad locks typically hold from a couple of dozen to a few hundred codes. Commercial systems manage thousands of users.
Which smart lock is best for a home in Pico Rivera?
It depends on the door and how you want to use it. A keypad deadbolt suits most households. Add Wi-Fi if you need remote control, or choose Bluetooth for longer battery life. We recommend models after seeing the door.
Can you install a lock I already bought?
Yes. We install customer-supplied locks, correct the door alignment they depend on, and complete the app setup.
Can access be limited to certain days and times?
Yes. Most smart locks and all access control systems support schedules, temporary codes and automatic expiry.
What happens if the batteries or power fail?
Battery locks warn you for weeks and have a key or external power option. Wired systems should have battery backup, and exits are designed to release safely.
Can smart locks be hacked?
Reputable brands use strong encryption, and real-world break-ins overwhelmingly involve force, not hacking. Strong passwords, two-factor authentication and updated firmware keep the risk low.
Do I need Wi-Fi for a keypad lock?
No. A standalone keypad lock works with no network at all. Wi-Fi is needed only for remote control and notifications.
Can you make car keys in Pico Rivera?
Yes. We cut and program car keys on site anywhere in Pico Rivera, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
How long does it take a locksmith to reach me in Pico Rivera?
It depends on where the nearest technician is and on traffic along I-5, I-605, or Whittier Boulevard. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Do you have a locksmith shop in Pico Rivera?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Pico Rivera and the rest of the Gateway Cities area. All work is done at your location.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
