Quick answer
Latch Guard Installation: Installing latch guards to protect against forced entry. Big Daddy Car Key Replacement provides latch guard installation service in Port Hueneme as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Latch Guard Installation
- Area
- Port Hueneme, Ventura County, CA (93041)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Door Hardware Services
- Phone
- (562) 550-7206
On this page
- About our latch guard installation service
- Who we help in Port Hueneme
- When you need latch guard installation service
- Latch Guard Installation across Port Hueneme
- How our latch guard installation service works
- Typical calls we receive
- Equipment and hardware on the van
- Trade terms explained
- Cost factors for latch guard installation service
- Why call Big Daddy Car Key Replacement
- Advice worth knowing
- Professional service compared with doing it yourself
- Our service standards
- Choosing a locksmith: a short checklist
- Before you call (562) 550-7206
- Aftercare and records
- Related locksmith services in Port Hueneme
- Latch Guard Installation near Port Hueneme
- Latch Guard Installation in Port Hueneme: frequently asked questions
About our latch guard installation service
Installing latch guards to protect against forced entry. A latch guard is a steel plate that covers the gap between door and frame at the lock, so a pry bar or credit card cannot reach the latch. It is essential on out-swinging doors, where the latch is otherwise exposed, and is a standard fitting on commercial back doors.

Doors in Port Hueneme deal with settling foundations, seasonal humidity, sun-baked frames and years of daily use. Our latch guard installation service corrects the misalignment, wear and loose hardware that make doors hard to close or lock, and adds reinforcement where a door is weaker than it should be.
Who we help in Port Hueneme
Door hardware calls in Port Hueneme come from homeowners with doors that stick or will not latch, landlords preparing units, businesses with heavily used entrances, and anyone who has had a door forced. Older buildings with settled frames and newer homes with lightly built doors both benefit from proper alignment and reinforcement.
This service is part of our door hardware services in Port Hueneme.
When you need latch guard installation service
These are the most common reasons customers in Port Hueneme ask for latch guard installation service:
- Your door swings outward
- Pry marks show at the latch
- The gap at the lock is wide enough to see the latch
- A back or side door is hidden from view
Latch Guard Installation across Port Hueneme
Located in Ventura County, Port Hueneme is an incorporated city within our service area. We cover every part of Port Hueneme, including the Hueneme Beach area, the Surfside condos, the Ventura Road corridor, and the Channel Islands Boulevard corridor. Wherever you are in town, the technician comes to your door, driveway or parking space. Service is available throughout ZIP code 93041.
Port Hueneme is a small beach city next to a deep-water port and a naval base, where military families moving in and out need quick rekeys and salt air shortens the life of exterior locks.
People call us from all over Port Hueneme, including the areas around the Port of Hueneme, Naval Base Ventura County, Hueneme Beach Park and Pier, the U.S. Navy Seabee Museum, and the Port Hueneme Lighthouse. A landmark or cross street helps the technician reach you quickly. Depending on where the closest technician is, the drive into Port Hueneme follows Ventura Road, Channel Islands Boulevard, Hueneme Road, Pleasant Valley Road, Victoria Avenue, and Surfside Drive. You get a realistic arrival estimate when you call.
How our latch guard installation service works
Describe the symptom
Tell us what the door does: rubs, rattles, will not latch, needs lifting to lock, or sticks at certain times of year. Symptoms point to the cause.
Inspect the whole opening
The technician checks the hinge screws, the gap around the door, the latch, the bolt, the strike plate and the frame for movement or damage.
Find the root cause
Marks on the strike plate, uneven gaps and loose hinges show whether the door has dropped, the frame has shifted, or the hardware itself has failed.
Agree the repair and price
You hear what needs adjusting, what needs replacing and what would be worth reinforcing, with prices, before work starts.
Make the repair
Hinges are re-anchored or shimmed, strikes repositioned and secured with long screws, latches replaced and bolt pockets deepened as required.
Test under real conditions
The door is closed normally, latched and locked several times. The deadbolt should extend fully without pushing or pulling on the door.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Typical calls we receive
- A latch has jammed and someone is stuck in a room.
- The deadbolt only turns if you pull the door hard toward you.
- The top corner of the door rubs the frame and the paint is wearing through.
- A previous break-in left the jamb cracked around the strike.
- The back door swings outward and its latch is visible through the gap.
- The door drifts open by itself because the latch no longer catches.
Equipment and hardware on the van
For door hardware work we carry replacement latches and deadlatches, adjustable and extended strike plates, heavy security strikes, jamb reinforcement kits, wrap-around door plates in common finishes and sizes, latch guards, residential and commercial hinges, hinge shims, three-inch case-hardened screws, door viewers, swing-bar guards and chains. For commercial openings we add pivot sets, continuous hinges and door closers. The right small part, fitted properly, is usually all a troublesome door needs.
Trade terms explained
- Shim
- A thin spacer placed behind a hinge to adjust how the door sits in its frame.
- Jamb
- The vertical part of the door frame that carries the hinges on one side and the strike on the other.
- Latch guard
- A plate covering the gap at the lock so the latch cannot be reached with a pry tool.
- Door wrap
- A metal plate that wraps the door edge around the lock to reinforce it against splitting.
- Deadlatch
- A latch with a small plunger that stops it being pushed back with a card once the door is closed.
- Strike plate
- The plate on the frame that receives the latch or bolt.
- Latch
- The spring-loaded bolt that holds a door closed and retracts when the handle is turned.
- Bolt throw
- How far a deadbolt extends from the door edge. One inch is the standard for security.
Cost factors for latch guard installation service
- Adjustment or replacement
- Tightening, shimming and repositioning are labor only. New latches, hinges, strikes or reinforcement plates add parts.
- Hardware quality
- Heavy-duty hinges, commercial closers and Grade 1 latches cost more than light residential parts and last longer.
- Reinforcement level
- A security strike is inexpensive. A full jamb shield and door wrap kit costs more and adds much more strength.
- Door and frame material
- Wood is the easiest to adjust. Metal frames, aluminum storefronts and fiberglass doors need different methods and parts.
- Extent of damage
- A split jamb or cracked door edge from a kick-in needs reinforcement hardware and more time than a simple alignment.
- Number of doors
- Several doors in one visit cost less per door than separate calls.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
Why call Big Daddy Car Key Replacement
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Port Hueneme.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.

Advice worth knowing
- If a door suddenly starts sticking, check for plumbing leaks or foundation movement.
- Do not file the strike larger each season. Fix the alignment so the bolt enters cleanly.
- Lubricate latches and hinges lightly once a year, and wipe away the excess.
- Look for shiny rub marks on the strike plate. They show exactly where the latch or bolt is hitting.
- Tighten hinge screws once a year. Replace any that spin with three-inch screws into the framing.
- Replace hollow-core exterior doors. No lock makes a weak door strong.
- A deadbolt must extend fully to be locked. If it stops short, it can be pushed back.
- Seal the top and bottom edges of wood doors with paint so they absorb less moisture and swell less.
Professional service compared with doing it yourself
Door adjustment is a matter of small measurements with large effects. Moving a strike two millimetres the wrong way, over-shimming a hinge or deepening a mortise carelessly can turn a sticking door into one that will not close. A locksmith reads the wear marks, corrects the cause instead of the symptom, and uses fasteners and reinforcement that actually reach the structure of the wall.
Our service standards
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
Choosing a locksmith: a short checklist
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Get an itemized receipt showing labor, parts and the business details.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
Before you call (562) 550-7206
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Aftercare and records
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Port Hueneme
Customers who need latch guard installation service often ask about these as well. Each can usually be handled in the same visit to Port Hueneme.
- Strike Plate Adjustment
Adjusting strike plates so doors latch and lock properly.
- Hinge Adjustment
Adjusting or replacing hinges so doors close correctly.
- Door Reinforcement
Adding security plates, reinforced strike plates, latch guards and door wrap plates.
- Door Viewer & Peephole Installation
Installing peepholes or door viewers for added safety.
- Door Lock Repair
Repairing lock cylinders, latches, strikes and internal mechanisms.
- Door Hardware Repair
Repairing the locks, latches, strikes, hinges and closers that make a door open, close and secure properly.
- Door Alignment for Locks
Fixing lock issues caused by sagging doors, shifted frames or misalignment.
- Security Strike Plate Installation
Installing stronger strike plates with longer screws for added protection.
- Door Latch Repair
Fixing latches that do not catch, stick or fail to retract.
- Door Chain Installation
Installing door chains or secondary security locks.
- Key Fob Replacement
Replacing remote key fobs for cars, trucks, SUVs and vans.
- Residential Locksmith
Complete lock and key service for houses, apartments, condos and rental properties.
- Automotive Locksmith
Mobile key, lock and ignition service for cars, trucks, SUVs, vans, motorcycles and fleets.
- Safe Locksmith
Opening, repairing, servicing and changing combinations on home and business safes.
- Key Duplication
Making spare keys for house doors, gates, mailboxes, padlocks, cabinets and more.
Latch Guard Installation near Port Hueneme
We provide the same latch guard installation service in the communities around Port Hueneme. See the main latch guard installation page or the full list of service areas.
- Latch Guard Installation in Oxnard
- Latch Guard Installation in Ventura
- Latch Guard Installation in Camarillo
- Latch Guard Installation in Santa Paula
- Latch Guard Installation in Moorpark
- Latch Guard Installation in Thousand Oaks
- Latch Guard Installation in Ojai
- Latch Guard Installation in Westlake Village
- Latch Guard Installation in Fillmore
- Latch Guard Installation in Agoura Hills
- Latch Guard Installation in Simi Valley
- Latch Guard Installation in Malibu
Latch Guard Installation in Port Hueneme: frequently asked questions
What does a latch guard do?
It shields the latch and bolt from prying and shimming by covering the gap at the door edge. On out-swinging doors it is one of the most effective low-cost security additions.
Do you work on commercial doors as well?
Yes. We service aluminum storefront doors, hollow metal doors, pivots, continuous hinges, closers and exit devices.
How long does a door adjustment take?
Most single-door alignments and strike adjustments take 30 to 60 minutes. Reinforcement kits take a little longer.
Will the repair damage my door or paint?
We work carefully and keep changes within the existing hardware footprint wherever possible. Any new mortising is cut cleanly.
Can you repair a door frame after a break-in?
Yes. We fit jamb repair and reinforcement kits that restore strength to a split frame, and replace damaged locks and strikes in the same visit.
Why do I have to push my door to lock it in Port Hueneme?
The bolt and the strike plate no longer line up, usually because the door has sagged on its hinges or the frame has moved. Realigning the door and resetting the strike fixes it.
Can door problems be fixed without replacing the lock?
Very often. Most latching and locking complaints are alignment issues, and the existing lock works properly once the door and strike are corrected.
Why does my door lock fine in summer but not winter?
Wood swells and shrinks with humidity, moving the bolt relative to the strike. A proper adjustment leaves clearance for that movement.
Which parts of Port Hueneme do you serve?
All of Port Hueneme, including the Hueneme Beach area, the Surfside condos, the Ventura Road corridor, and the Channel Islands Boulevard corridor, and addresses in ZIP code 93041.
Do you have a locksmith shop in Port Hueneme?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Port Hueneme and the surrounding communities. All work is done at your location.
Can you make car keys in Port Hueneme?
Yes. We cut and program car keys on site anywhere in Port Hueneme, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
Which areas do you cover?
We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
