Quick answer
The 2004 Ford Taurus typically uses a transponder chip key: a edge-cut metal key with a coded chip in its head that the immobilizer must recognize before the engine will run. Big Daddy Car Key Replacement makes 2004 Ford Taurus keys on site in Reseda, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 2004 Ford Taurus
- Typical key
- Transponder chip key
- Transponder chip
- Yes
- Blade
- Edge-cut
- Programming
- Required, done on site
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 2004 Ford Taurus use?
- How we make a 2004 Ford Taurus key
- How Ford key and immobilizer systems work
- Common Ford key and lock problems
- All keys lost or just need a spare?
- Stranded with your Ford right now?
- 2004 Ford Taurus key replacement across Reseda
- Getting a 2004 Ford Taurus key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Ford key?
- What affects the cost of a 2004 Ford Taurus key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers in Reseda choose Big Daddy
- Looking after your Ford key
- Choosing a car locksmith you can trust
- Other Ford Taurus years
- Other Ford models
- Related automotive locksmith services in Reseda
- 2004 Ford Taurus keys near Reseda
- 2004 Ford Taurus key replacement in Reseda: frequently asked questions
What kind of key does a 2004 Ford Taurus use?
The 2004 Ford Taurus typically uses a transponder chip key: a edge-cut metal key with a coded chip in its head that the immobilizer must recognize before the engine will run.
Transponder chip key
A transponder key looks like an ordinary key with a plastic head, but the head holds a tiny chip with no battery. When you turn the ignition, an antenna ring around the lock energizes the chip and asks for its code. If the immobilizer recognizes the answer, it lets the engine run. If not, the engine cranks without starting or starts and dies within seconds.

How we make a 2004 Ford Taurus key
For the 2004 Ford Taurus we cut the blade to code, then program the chip. Where a working key exists, its data can often be cloned or used to authorize a new key quickly. When every key is lost, we connect to the car through the diagnostic port, obtain security access, and register new keys directly to the immobilizer. A spare transponder key is usually done in 15 to 30 minutes. An all-keys-lost job takes longer, commonly 30 to 60 minutes, because security access takes time on many systems.
This page covers the 2004 model year. For other years, see the Ford Taurus key replacement overview, or browse all Ford models.
How Ford key and immobilizer systems work
Ford, Lincoln and Mercury use PATS, the Passive Anti-Theft System. A transponder in the key head must be registered in the car’s computer. Many models let an owner add a third key if two programmed keys are present; with one or none, diagnostic access is needed and there is often a built-in ten-minute security wait. Later models add integrated remote-head keys, laser-cut blades and Intelligent Access proximity fobs.
Ford’s PATS immobilizer arrived in 1996 and spread across the range by the early 2000s. Many Fords let you add a key yourself if you already have two working keys, which is the best reason to never be down to one.
Common Ford key and lock problems
These are the issues we see most often on Ford vehicles in Reseda:
- A rapidly flashing theft light and no start after using an unprogrammed copy
- Ignition cylinders that jam on high-mileage Focus, Explorer and F-Series models
- Remote-head keys whose buttons wear through
- Door keypad codes that owners have forgotten or never learned
All keys lost or just need a spare?
How many keys you still have matters more than almost anything else. With one working key present, a second key can usually be copied or added in a short visit. With no keys at all, the technician must first work out the correct cuts, from the VIN or by decoding a lock, and then gain security access to the immobilizer so a new key can be registered. That all-keys-lost process is routine for us and is done on site, but it takes more time. If you are down to your last key, adding a spare today is far cheaper than replacing every key later.
Stranded with your Ford right now?
Stuck without a working key? First make sure you are somewhere safe and visible. Think about whether a spare exists at home or with a family member. Then call (562) 550-7206 and give us the year, make, model, your location and whether the vehicle is locked or open. We will tell you the likely cost and how long a technician will take to reach you. For a child or pet locked inside, call 911 before anything else.
2004 Ford Taurus key replacement across Reseda
Reseda is a neighborhood of the City of Los Angeles in Los Angeles County, part of the San Fernando Valley area we cover every day. We cover every part of Reseda, including the Sherman Way commercial strip, the Reseda Boulevard corridor, and the blocks around Reseda Park. Wherever you are in town, the technician comes to your door, driveway or parking space. We serve the 91335 ZIP code.
Reseda is a classic Valley grid of 1950s tract houses, garden apartments and strip-mall storefronts, where worn-out original locks, storefront cylinders and older ignition problems are common calls.
People call us from all over Reseda, including the areas around Reseda Park, the Sherman Way business district, the historic Reseda Theatre, and the Los Angeles River greenway. A landmark or cross street helps the technician reach you quickly. Depending on where the closest technician is, the drive into Reseda follows US-101, Reseda Boulevard, Sherman Way, Victory Boulevard, Vanowen Street, and Tampa Avenue. You get a realistic arrival estimate when you call.
Getting a 2004 Ford Taurus key made, step by step
Call with the year, make and model
Tell us you need a key for a 2004 Ford Taurus, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Ford key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 2004 Ford Taurus key
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
Price depends on the chip type, whether you still have a working key, and how the vehicle grants programming access. Adding a spare while one key still works is always the cheaper job. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
Whoever finds a lost key might find the car. During programming we can usually remove lost keys from the vehicle’s memory, which stops them starting the engine. That does not change the mechanical door lock, so if theft is a concern, the door cylinders can be rekeyed to a new cut as well.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
- All keys lost
- A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
- Immobilizer
- The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
Situations we are called to most often
- A used car was sold with one worn key and no spare.
- The dash reads "key not detected" and the start button does nothing.
- A hardware-store copy opens the door but the engine will not start.
- The only key to the car is lost somewhere between the beach, the restaurant and home.
- The key is locked in the trunk and the trunk release is disabled.
Why drivers in Reseda choose Big Daddy
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Reseda.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.

Looking after your Ford key
The chip is durable but not indestructible. Keys that have been crushed, soaked or overheated can keep turning the lock while no longer starting the car. Keep a programmed spare somewhere safe.
- Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
- Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
- If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
- Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
Choosing a car locksmith you can trust
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Get an itemized receipt showing labor, parts and the business details.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
Other Ford Taurus years
- 2019 Taurus
- 2018 Taurus
- 2017 Taurus
- 2016 Taurus
- 2015 Taurus
- 2014 Taurus
- 2013 Taurus
- 2012 Taurus
- 2011 Taurus
- 2010 Taurus
- 2009 Taurus
- 2008 Taurus
- 2007 Taurus
- 2006 Taurus
- 2005 Taurus
- 2003 Taurus
- 2002 Taurus
- 2001 Taurus
- 2000 Taurus
- 1999 Taurus
- 1998 Taurus
- 1997 Taurus
- 1996 Taurus
- 1995 Taurus
- 1994 Taurus
- 1993 Taurus
- 1992 Taurus
- 1991 Taurus
- 1990 Taurus
Other Ford models
- Ford E-350 keys
- Ford F-150 keys
- Ford Mustang keys
- Ford Explorer keys
- Ford Expedition keys
- Ford Ranger keys
- Ford F-250 Super Duty keys
- Ford F-350 Super Duty keys
- Ford Escape keys
- Ford E-150 keys
- Ford E-250 keys
- Ford Crown Victoria keys
- Ford Focus keys
Related automotive locksmith services in Reseda
- Boat Key Replacement
Replacing keys for boat ignitions, compartments and storage locks.
- Car Key Replacement
Replacing lost, stolen or damaged car keys.
- Fleet Vehicle Locksmith
Key replacement, lockouts, rekeys and key duplication for business fleets.
- Semi-Truck Locksmith
Lockouts, key replacement, ignition repair and fleet key services for commercial trucks.
- Trunk Lockout Service
Opening locked trunks when keys are lost or locked inside.
- Lost Car Key Replacement
Making a new car key when all keys are lost.
- Automotive Locksmith
Mobile key, lock and ignition service for cars, trucks, SUVs, vans, motorcycles and fleets.
- Spare Car Key
Creating duplicate or backup keys.
2004 Ford Taurus keys near Reseda
We make 2004 Ford Taurus keys in the communities around Reseda as well. See the main 2004 Ford Taurus key replacement page or the Reseda locksmith page.
- 2004 Ford Taurus keys in Northridge
- 2004 Ford Taurus keys in Lake Balboa
- 2004 Ford Taurus keys in Winnetka
- 2004 Ford Taurus keys in Tarzana
- 2004 Ford Taurus keys in Canoga Park
- 2004 Ford Taurus keys in Encino
- 2004 Ford Taurus keys in North Hills
- 2004 Ford Taurus keys in Woodland Hills
- 2004 Ford Taurus keys in Van Nuys
- 2004 Ford Taurus keys in Panorama City
- 2004 Ford Taurus keys in Chatsworth
- 2004 Ford Taurus keys in Mission Hills
2004 Ford Taurus key replacement in Reseda: frequently asked questions
Does my 2004 Ford Taurus key have a chip?
Most were built with a transponder chip in the key head. A security light on the dash, or a plain metal copy that turns the ignition without starting the engine, confirms it. We verify on site before cutting.
Can I program a 2004 Ford Taurus key myself?
Some vehicles allow a new key to be added using one or two existing programmed keys and a timed ignition sequence. With no working key, or on systems without that feature, diagnostic equipment is required.
Why does my Ford crank but not start with the new copy?
The copy was cut but never programmed, so the immobilizer does not recognize it. The blade is fine; the chip needs to be registered to the car or replaced with the correct type.
I have only one Ford key. Can I program a second one myself?
No. The self-programming procedure requires two working keys. With one key, a locksmith or dealer must add the spare with a diagnostic tool, which is still quicker and cheaper than replacing all keys later.
Why does programming a Ford key take ten minutes of waiting?
PATS enforces a timed security delay before it grants programming access on many models. It is normal and built into the system.
Will my lost 2004 Ford Taurus key still start the car?
For chip and smart keys we can usually erase lost keys from the car’s memory during programming, so they no longer start the engine. A lost key could still open the door mechanically unless the locks are rekeyed.
Do you also repair the ignition on a 2004 Ford Taurus?
Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.
Can you make a 2004 Ford Taurus key at night or on a weekend?
Yes. We are open 24 hours, seven days a week, including holidays, which is when dealership parts and service departments are closed.
Is a locksmith-made Ford key as good as a dealer key?
Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.
Do I have to tow my 2004 Ford Taurus to you?
No. We are a mobile service. The key machines and programming equipment are in the van, and the work is done where the vehicle is parked.
Can you make car keys in Reseda?
Yes. We cut and program car keys on site anywhere in Reseda, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Are you open 24 hours in Reseda?
Yes. We take calls and dispatch to Reseda 24 hours a day, including weekends and holidays.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
