Quick answer
The 1990 Nissan Maxima typically uses a traditional edge-cut metal key with no transponder chip. Big Daddy Car Key Replacement makes 1990 Nissan Maxima keys on site in Reseda, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 1990 Nissan Maxima
- Typical key
- Traditional metal key
- Transponder chip
- No
- Blade
- Edge-cut
- Programming
- Not normally required
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 1990 Nissan Maxima use?
- How we make a 1990 Nissan Maxima key
- How Nissan key and immobilizer systems work
- Common Nissan key and lock problems
- All keys lost or just need a spare?
- Stranded with your Nissan right now?
- 1990 Nissan Maxima key replacement across Reseda
- Getting a 1990 Nissan Maxima key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Nissan key?
- What affects the cost of a 1990 Nissan Maxima key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers in Reseda choose Big Daddy
- Looking after your Nissan key
- Choosing a car locksmith you can trust
- Other Nissan Maxima years
- Other Nissan models
- Related automotive locksmith services in Reseda
- 1990 Nissan Maxima keys near Reseda
- 1990 Nissan Maxima key replacement in Reseda: frequently asked questions
What kind of key does a 1990 Nissan Maxima use?
The 1990 Nissan Maxima typically uses a traditional edge-cut metal key with no transponder chip.
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

How we make a 1990 Nissan Maxima key
For the 1990 Nissan Maxima we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.
This page covers the 1990 model year. For other years, see the Nissan Maxima key replacement overview, or browse all Nissan models.
How Nissan key and immobilizer systems work
Nissan and Infiniti use NATS, the Nissan Anti-Theft System, with a transponder registered in the immobilizer or body control module. The Intelligent Key added proximity entry and, from the late 2000s, push-button start. Programming requires a PIN that is calculated from a code read out of the body control module, and newer models use rolling 20-digit codes that need current equipment.
Nissan’s NATS immobilizer spread across the lineup around 2000, and the Intelligent Key followed in the mid-2000s. Every Altima since 2007 has push-button start, making it one of the most common smart-key cars on the road.
Common Nissan key and lock problems
These are the issues we see most often on Nissan vehicles in Reseda:
- Steering lock (ESCL) failures on some push-button models that prevent starting
- Intelligent Keys that are not detected when the fob battery is weak
- Twist-knob ignitions that will not turn without a recognized key
- Body control module problems that erase programmed keys
All keys lost or just need a spare?
There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.
Stranded with your Nissan right now?
If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.
1990 Nissan Maxima key replacement across Reseda
Located in Los Angeles County, Reseda is a neighborhood of the City of Los Angeles within our San Fernando Valley service area. Customers anywhere in Reseda, including the Sherman Way commercial strip, the Reseda Boulevard corridor, and the blocks around Reseda Park, can have a mobile technician sent directly to them. That includes addresses in ZIP code 91335.
Reseda is a classic Valley grid of 1950s tract houses, garden apartments and strip-mall storefronts, where worn-out original locks, storefront cylinders and older ignition problems are common calls.
If you are out and about near Reseda Park, the Sherman Way business district, the historic Reseda Theatre, or the Los Angeles River greenway, give us that location when you call and wait somewhere safe and visible. Depending on where the closest technician is, the drive into Reseda follows US-101, Reseda Boulevard, Sherman Way, Victory Boulevard, Vanowen Street, and Tampa Avenue. You get a realistic arrival estimate when you call.
Getting a 1990 Nissan Maxima key made, step by step
Call with the year, make and model
Tell us you need a key for a 1990 Nissan Maxima, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Nissan key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 1990 Nissan Maxima key
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
- All keys lost
- A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
Situations we are called to most often
- The dash reads "key not detected" and the start button does nothing.
- The ignition will not turn and the key will not come out.
- The only key to the car is lost somewhere between the beach, the restaurant and home.
- A hardware-store copy opens the door but the engine will not start.
- The key is locked in the trunk and the trunk release is disabled.
Why drivers in Reseda choose Big Daddy
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Reseda.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.

Looking after your Nissan key
Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
- Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
- Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
- When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
Choosing a car locksmith you can trust
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Get an itemized receipt showing labor, parts and the business details.
Other Nissan Maxima years
- 2023 Maxima
- 2022 Maxima
- 2021 Maxima
- 2020 Maxima
- 2019 Maxima
- 2018 Maxima
- 2017 Maxima
- 2016 Maxima
- 2015 Maxima
- 2014 Maxima
- 2013 Maxima
- 2012 Maxima
- 2011 Maxima
- 2010 Maxima
- 2009 Maxima
- 2008 Maxima
- 2007 Maxima
- 2006 Maxima
- 2005 Maxima
- 2004 Maxima
- 2003 Maxima
- 2002 Maxima
- 2001 Maxima
- 2000 Maxima
- 1999 Maxima
- 1998 Maxima
- 1997 Maxima
- 1996 Maxima
- 1995 Maxima
- 1994 Maxima
- 1993 Maxima
- 1992 Maxima
- 1991 Maxima
Other Nissan models
- Nissan Pathfinder keys
- Nissan Sentra keys
- Nissan Altima keys
- Nissan Frontier keys
- Nissan Quest keys
- Nissan Murano keys
- Nissan Armada keys
- Nissan Titan keys
- Nissan Versa keys
- Nissan Rogue keys
- Nissan GT-R keys
- Nissan Leaf keys
- Nissan Xterra keys
Related automotive locksmith services in Reseda
- Car Lockout
Unlocking vehicles when keys are locked inside.
- Transponder Key Programming
Programming chip keys for vehicles with immobilizer systems.
- Semi-Truck Locksmith
Lockouts, key replacement, ignition repair and fleet key services for commercial trucks.
- Ignition Repair
Repairing ignition cylinders that are stuck, worn or will not turn.
- Emergency Vehicle Lockout
Fast unlocking for cars, trucks, SUVs, vans and work vehicles.
- Smart Key Replacement
Replacing push-to-start smart keys and proximity keys.
- Ignition Key Replacement
Making replacement keys for vehicle ignitions.
- Motorcycle Key Replacement
Replacing lost or broken motorcycle keys.
1990 Nissan Maxima keys near Reseda
We make 1990 Nissan Maxima keys in the communities around Reseda as well. See the main 1990 Nissan Maxima key replacement page or the Reseda locksmith page.
- 1990 Nissan Maxima keys in Northridge
- 1990 Nissan Maxima keys in Lake Balboa
- 1990 Nissan Maxima keys in Winnetka
- 1990 Nissan Maxima keys in Tarzana
- 1990 Nissan Maxima keys in Canoga Park
- 1990 Nissan Maxima keys in Encino
- 1990 Nissan Maxima keys in North Hills
- 1990 Nissan Maxima keys in Woodland Hills
- 1990 Nissan Maxima keys in Van Nuys
- 1990 Nissan Maxima keys in Panorama City
- 1990 Nissan Maxima keys in Chatsworth
- 1990 Nissan Maxima keys in Mission Hills
1990 Nissan Maxima key replacement in Reseda: frequently asked questions
Does a 1990 Nissan Maxima key need programming?
A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.
Can any hardware store copy my 1990 Nissan Maxima key?
If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.
My Nissan key turns in the door but not the ignition. Why?
The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.
My Nissan says "No Key Detected". What should I do?
Replace the fob battery, then hold the fob against the start button while pressing it. If the car still does not respond, the fob, the antenna or the steering lock may be at fault, and we can test each.
Do all keys have to be present when programming a Nissan?
Yes on most models. Programming re-registers every key, and any key not present is erased from the system.
Is a locksmith-made Nissan key as good as a dealer key?
Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.
Can you make a key for a 1990 Nissan Maxima if I have lost every key?
In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.
Do you also repair the ignition on a 1990 Nissan Maxima?
Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.
What do you need from me to make a 1990 Nissan Maxima key?
A photo ID and proof that the vehicle is yours, such as registration, title or insurance, plus access to the vehicle. Having the VIN ready when you call speeds things up.
Do I have to tow my 1990 Nissan Maxima to you?
No. We are a mobile service. The key machines and programming equipment are in the van, and the work is done where the vehicle is parked.
Do you have a locksmith shop in Reseda?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Reseda and the rest of the San Fernando Valley area. All work is done at your location.
How long does it take a locksmith to reach me in Reseda?
It depends on where the nearest technician is and on traffic along US-101, Reseda Boulevard, or Sherman Way. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
