Quick answer
Commercial Door Hardware: Supplying and installing commercial-grade levers, pulls, hinges, closers, exit devices, strikes and protective plates. Big Daddy Car Key Replacement provides commercial door hardware service in Reseda as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Commercial Door Hardware
- Area
- Reseda, Los Angeles County, CA (91335)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Commercial Locksmith Services
- Phone
- (562) 550-7206
On this page
- What commercial door hardware involves
- Who uses this service
- Signs you need commercial door hardware service
- Commercial Door Hardware across Reseda
- How our commercial door hardware service works
- Common situations in Reseda
- Tools, parts and hardware we carry
- A short glossary
- Cost factors for commercial door hardware service
- Why Reseda customers choose Big Daddy
- Tips to avoid problems
- Doing it yourself versus calling a professional
- How we work on every job
- How to choose a locksmith you can trust
- How to prepare for the visit
- Aftercare and records
- Related locksmith services in Reseda
- Commercial Door Hardware near Reseda
- Commercial Door Hardware in Reseda: frequently asked questions
What commercial door hardware involves
Supplying and installing commercial-grade levers, pulls, hinges, closers, exit devices, strikes and protective plates. Commercial door hardware is specified by opening: the right hinge type and count, a closer, a lock or exit device with the correct function, and protection such as kick plates and latch guards. We supply and install complete hardware sets for tenant improvements and replace individual components that have worn out.

Every business in Reseda eventually faces the same questions. Who has keys? Do the exit doors work? Would the back door survive a pry bar? Our commercial door hardware service gives practical answers and carries out the work, usually in a single visit and with as little disruption as possible.
Who uses this service
Our commercial customers in Reseda include retail shops, restaurants, offices, medical and dental practices, warehouses, schools, places of worship, property management companies and homeowners associations. Some need a one-time rekey after a staffing change, others an ongoing arrangement covering key systems, exit hardware and door maintenance across several sites.
This service is part of our commercial locksmith services in Reseda.
Signs you need commercial door hardware service
People in Reseda usually call us for commercial door hardware service in situations like these:
- A build-out needs complete hardware sets
- Hardware finishes or functions do not match
- Doors lack kick plates or latch protection
- Hinges are worn and doors are sagging
Commercial Door Hardware across Reseda
Located in Los Angeles County, Reseda is a neighborhood of the City of Los Angeles within our San Fernando Valley service area. We cover every part of Reseda, including the Sherman Way commercial strip, the Reseda Boulevard corridor, and the blocks around Reseda Park. Wherever you are in town, the technician comes to your door, driveway or parking space. We serve the 91335 ZIP code.
Reseda is a classic Valley grid of 1950s tract houses, garden apartments and strip-mall storefronts, where worn-out original locks, storefront cylinders and older ignition problems are common calls.
Whether you are at home, at work, or stuck near Reseda Park, the Sherman Way business district, the historic Reseda Theatre, or the Los Angeles River greenway, tell the dispatcher the nearest landmark and we will find you. Technicians usually reach Reseda by US-101, Reseda Boulevard, Sherman Way, Victory Boulevard, Vanowen Street, and Tampa Avenue. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
How our commercial door hardware service works
Discuss the need and the site
We ask about the type of business, the doors involved and any deadline, such as an inspection, a tenant move-in or a termination. Photos of the doors help us arrive with the right parts.
Verify authority
Work on a commercial property is done for the owner, the tenant of record, or the property manager. We confirm that before any lock is opened or changed.
Survey the openings
Each door is checked for lock type and function, closer, hinges or pivots, exit hardware and fire rating, so the solution fits both the security need and the code.
Agree scope and price
You receive a clear scope: which doors, what hardware, how many keys, and the cost. For key systems we draft the hierarchy for your approval first.
Carry out the work around your schedule
Rekeys, repairs and installations are done before opening, after closing or during quiet hours when that suits the business better.
Test, document and hand over
Every door is tested for locking, latching and free exit. Keys are stamped and counted, and for master systems you receive a record of what opens what.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Common situations in Reseda
- The storefront door will not latch and the shop cannot be left for the night.
- Staff need access to the sales floor but not the office, stockroom or IT closet.
- A manager is let go and returns only some of the keys issued.
- A fire inspection notes that the rear exit has a slide bolt and no panic hardware.
- The back door shows pry marks around the latch after the weekend.
- You are taking over a suite and need the previous tenant’s keys cut off before move-in.
- A closer has failed and the front door slams hard enough to rattle the glass.
Tools, parts and hardware we carry
Commercial doors use purpose-built hardware. Aluminum storefronts typically carry Adams Rite-style deadlatches and hook bolts driven by a mortise cylinder. Hollow metal and wood doors use Grade 1 cylindrical levers or mortise locks from makers such as Schlage, Sargent, Corbin Russwin and Yale. Exits use panic and fire exit devices, and closers from LCN, Norton and similar makers control the swing. Interchangeable cores allow fast rekeying. We stock the common cylinders, cams, tailpieces, lock bodies and closers.
A short glossary
- Interchangeable core
- A removable lock core that a control key releases, allowing a door to be rekeyed in seconds.
- Mortise lock
- A heavy-duty lock housed in a pocket cut into the door edge, combining latch and deadbolt in one case.
- Door closer
- A hydraulic device that closes a door at a controlled speed and holds it latched.
- Restricted keyway
- A key profile whose blanks are supplied only to authorized locksmiths, preventing unauthorized copies.
- Master key system
- A planned arrangement in which each lock has its own key and a master key opens all of them.
- Exit device
- Panic or fire exit hardware that unlatches a door when the horizontal bar is pushed.
- Cylindrical lock
- A lock installed through a round bore in the door, with the mechanism in the lever or knob assembly.
- Lock function
- How a lock behaves, such as entry, storeroom, classroom or passage, which determines when it is locked and who can lock it.
Cost factors for commercial door hardware service
- Code and fire-rating requirements
- Fire-rated openings need listed hardware, and exits may need panic devices. Compliance can dictate the product.
- Electrified hardware
- Doors tied to access control, electric strikes or maglocks need wiring and coordination that add time.
- After-hours scheduling
- Work outside normal hours avoids disruption and may be priced differently. We quote both where it matters.
- Hardware grade and function
- Grade 1 mortise locks and exit devices cost more than cylindrical levers, and they last far longer on busy doors.
- Key system complexity
- A simple rekey to one key is quick. A master or grand master system takes planning, more pinning time and record keeping.
- Number and type of doors
- Aluminum storefront doors, hollow metal doors and wood office doors use different hardware. Pricing reflects how many openings are involved and what each requires.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
Why Reseda customers choose Big Daddy
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.

Tips to avoid problems
- Use a restricted keyway if staff copying keys is a concern. A "Do Not Duplicate" stamp alone does not prevent copies.
- Keep a written key log: who holds which key, and the date it was issued and returned.
- Never chain, padlock or bolt a required exit door while the building is occupied.
- Consider keypad or card access for doors with frequent staff turnover.
- Test exit devices and door closers monthly. A door that does not latch is an unlocked door.
- Fit latch guards on out-swinging back doors, where the latch is exposed to prying.
- Give each employee access only to the doors their job requires.
- Rekey whenever a keyholder leaves on poor terms or a key cannot be accounted for.
Doing it yourself versus calling a professional
Commercial doors are regulated in ways that homes are not. The wrong lock function can trap someone inside a storeroom, a deadbolt on an exit can fail an inspection or cost a life, and unlisted hardware can void a fire door’s rating. A commercial locksmith knows the functions, the grades and the applicable codes, keeps your key system mathematically sound, and documents the work so the next change is straightforward.
How we work on every job
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
How to choose a locksmith you can trust
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Get an itemized receipt showing labor, parts and the business details.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
How to prepare for the visit
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Aftercare and records
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Reseda
Customers who need commercial door hardware service often ask about these as well. Each can usually be handled in the same visit to Reseda.
- Retail Store Locksmith Service
Lock repair, rekeying, high-security locks and emergency unlocking for retail stores.
- High-Security Commercial Locks
Installing restricted keyway locks, pick-resistant locks, drill-resistant locks and bump-resistant lock systems.
- Restricted Key Systems
Installing key systems that prevent unauthorized key duplication.
- Exit Device Installation
Installing code-compliant exit devices for commercial emergency exits.
- Grand Master Key Systems
Advanced access control where one top-level key opens multiple buildings or departments.
- Cash Drawer Lock Replacement
Replacing locks on registers, cash drawers and POS stations.
- Door Closer Installation
Installing hydraulic door closers on commercial doors.
- Restaurant Locksmith Service
Lockouts, rekeys, panic bars, door closers, storefront locks and access control for restaurants.
- Commercial Lock Rekeying
Rekeying locks after employee turnover, lost keys, tenant changes or security concerns.
- Commercial Door Hardware Repair
Repairing commercial handles, hinges, closers, locks, latches, strikes, pivots and door frames.
- High Security Locks
Locks engineered to resist picking, bumping, drilling and unauthorized key copying.
- Automotive Locksmith
Mobile key, lock and ignition service for cars, trucks, SUVs, vans, motorcycles and fleets.
- Deadbolt Installation
Installing single-cylinder, double-cylinder, high-security or smart deadbolts.
- Lost Car Key Replacement
Making a new car key when all keys are lost.
- Lock Installation
Installing new locks on doors that need added security, including exterior doors, bedroom doors, home offices, gates and garage access doors.
Commercial Door Hardware near Reseda
We provide the same commercial door hardware service in the communities around Reseda. See the main commercial door hardware page or the full list of service areas.
- Commercial Door Hardware in Northridge
- Commercial Door Hardware in Lake Balboa
- Commercial Door Hardware in Winnetka
- Commercial Door Hardware in Tarzana
- Commercial Door Hardware in Canoga Park
- Commercial Door Hardware in Encino
- Commercial Door Hardware in North Hills
- Commercial Door Hardware in Woodland Hills
- Commercial Door Hardware in Van Nuys
- Commercial Door Hardware in Panorama City
- Commercial Door Hardware in Chatsworth
- Commercial Door Hardware in Mission Hills
Commercial Door Hardware in Reseda: frequently asked questions
What hardware does a commercial door need?
Typically hinges or pivots rated for the door’s weight, a closer, a Grade 1 lock or exit device with the right function, a strike, and weatherstripping and threshold on exterior doors. Fire-rated doors need labeled hardware throughout.
Are our exit doors compliant?
We can check that exit doors open with one motion and no key, that panic hardware is present where required, and that closers latch the doors. Final authority rests with your fire marshal or building official.
Do you offer ongoing service for multiple locations?
Yes. We service multi-site businesses and managed properties across our service area and keep key records so later changes are fast.
How long does it take to rekey a business?
A small shop or office with a handful of doors usually takes about an hour. Larger sites and master key systems are scheduled by scope.
Can you provide documentation for our records?
Yes. For rekeys and key systems we provide a key schedule listing doors, key numbers and the quantity of keys issued.
Can you work outside our business hours in Reseda?
Yes. We are open 24 hours and regularly schedule rekeys, repairs and installations before opening or after closing so customers and staff are not disturbed.
How do we stop employees from copying keys?
Install a restricted key system. Its blanks are available only through the authorized locksmith and copies are cut only for people on your signature list.
What brands of commercial hardware do you service?
We work with the major commercial lines, including Schlage, Sargent, Corbin Russwin, Yale, Best, Adams Rite, Von Duprin, LCN, Norton and Kaba, and can match most existing hardware.
Which parts of Reseda do you serve?
All of Reseda, including the Sherman Way commercial strip, the Reseda Boulevard corridor, and the blocks around Reseda Park, and addresses in ZIP code 91335.
Can you make car keys in Reseda?
Yes. We cut and program car keys on site anywhere in Reseda, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Are you open 24 hours in Reseda?
Yes. We take calls and dispatch to Reseda 24 hours a day, including weekends and holidays.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
