Quick answer
The 1994 Acura Integra typically uses a traditional edge-cut metal key with no transponder chip. Big Daddy Car Key Replacement makes 1994 Acura Integra keys on site in Rolling Hills, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 1994 Acura Integra
- Typical key
- Traditional metal key
- Transponder chip
- No
- Blade
- Edge-cut
- Programming
- Not normally required
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 1994 Acura Integra use?
- How we make a 1994 Acura Integra key
- How Acura key and immobilizer systems work
- Common Acura key and lock problems
- All keys lost or just need a spare?
- Stranded with your Acura right now?
- 1994 Acura Integra key replacement across Rolling Hills
- Getting a 1994 Acura Integra key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Acura key?
- What affects the cost of a 1994 Acura Integra key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers in Rolling Hills choose Big Daddy
- Looking after your Acura key
- Choosing a car locksmith you can trust
- Other Acura Integra years
- Other Acura models
- Related automotive locksmith services in Rolling Hills
- 1994 Acura Integra keys near Rolling Hills
- 1994 Acura Integra key replacement in Rolling Hills: frequently asked questions
What kind of key does a 1994 Acura Integra use?
The 1994 Acura Integra typically uses a traditional edge-cut metal key with no transponder chip.
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

How we make a 1994 Acura Integra key
For the 1994 Acura Integra we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.
This page covers the 1994 model year. For other years, see the Acura Integra key replacement overview, or browse all Acura models.
How Acura key and immobilizer systems work
Honda and Acura immobilizers register each key’s transponder in the engine computer or immobilizer unit. There is no owner self-programming; a diagnostic tool is always required. Most models from the early 2000s use a laser-cut blade, later ones a remote-head key, and Smart Entry proximity keys appear from the mid-2010s. When adding a key, existing keys are usually re-registered in the same session.
Acura adopted laser-cut keys and immobilizers earlier than most brands, and its Keyless Access proximity system spread across the range from the RL in 2005. Many Acura smart keys are tied to driver memory positions, so each key is numbered.
Common Acura key and lock problems
These are the issues we see most often on Acura vehicles in Rolling Hills:
- Worn laser-cut keys that stop turning the ignition smoothly
- Ignition cylinders with sticking wafers on high-mileage Accord, Civic and CR-V models
- A flashing green key light when the chip is not recognized
- Remote-head keys with cracked cases or worn buttons
All keys lost or just need a spare?
How many keys you still have matters more than almost anything else. With one working key present, a second key can usually be copied or added in a short visit. With no keys at all, the technician must first work out the correct cuts, from the VIN or by decoding a lock, and then gain security access to the immobilizer so a new key can be registered. That all-keys-lost process is routine for us and is done on site, but it takes more time. If you are down to your last key, adding a spare today is far cheaper than replacing every key later.
Stranded with your Acura right now?
Stuck without a working key? First make sure you are somewhere safe and visible. Think about whether a spare exists at home or with a family member. Then call (562) 550-7206 and give us the year, make, model, your location and whether the vehicle is locked or open. We will tell you the likely cost and how long a technician will take to reach you. For a child or pet locked inside, call 911 before anything else.
1994 Acura Integra key replacement across Rolling Hills
Rolling Hills is an incorporated city in Los Angeles County, part of the South Bay area we cover every day. We cover every part of Rolling Hills, including the Portuguese Bend Road area, the Crest Road area, the Eastfield area, and Saddleback. Wherever you are in town, the technician comes to your door, driveway or parking space. We serve the 90274 ZIP code.
Rolling Hills is an entirely gated city of single-story ranch estates on large equestrian lots, so visits are cleared at the gatehouse and usually involve whole-property rekeys, gate locks, barns and safes.
People call us from all over Rolling Hills, including the areas around the three guarded gatehouses, the city’s bridle trails, the Rolling Hills City Hall campus, and the white three-rail ranch fences. A landmark or cross street helps the technician reach you quickly. Rolling Hills is served by Portuguese Bend Road, Crest Road, Eastfield Drive, Saddleback Road, and Palos Verdes Drive North, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
Getting a 1994 Acura Integra key made, step by step
Call with the year, make and model
Tell us you need a key for a 1994 Acura Integra, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Acura key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 1994 Acura Integra key
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
Whoever finds a lost key might find the car. During programming we can usually remove lost keys from the vehicle’s memory, which stops them starting the engine. That does not change the mechanical door lock, so if theft is a concern, the door cylinders can be rekeyed to a new cut as well.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
- Immobilizer
- The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
Situations we are called to most often
- A used car was sold with one worn key and no spare.
- The only key to the car is lost somewhere between the beach, the restaurant and home.
- The key fob went through the washing machine.
- A hardware-store copy opens the door but the engine will not start.
- The ignition will not turn and the key will not come out.
Why drivers in Rolling Hills choose Big Daddy
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Rolling Hills.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.

Looking after your Acura key
Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.
- Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
- Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
- If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
- Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
Choosing a car locksmith you can trust
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
Other Acura Integra years
- 2026 Integra
- 2025 Integra
- 2024 Integra
- 2023 Integra
- 2001 Integra
- 2000 Integra
- 1999 Integra
- 1998 Integra
- 1997 Integra
- 1996 Integra
- 1995 Integra
- 1993 Integra
- 1992 Integra
- 1991 Integra
- 1990 Integra
Other Acura models
- Acura MDX keys
- Acura NSX keys
- Acura RDX keys
- Acura TL keys
- Acura RL keys
- Acura TLX keys
- Acura TSX keys
- Acura ILX keys
- Acura CL keys
- Acura RLX keys
- Acura ZDX keys
- Acura Legend keys
- Acura RSX keys
Related automotive locksmith services in Rolling Hills
- Key Fob Programming
Programming new or replacement key fobs.
- Semi-Truck Locksmith
Lockouts, key replacement, ignition repair and fleet key services for commercial trucks.
- Broken Car Key Extraction
Removing broken keys from ignitions, door locks, trunks and glove boxes.
- Car Locksmith
On-site car key, lockout and ignition help wherever the vehicle is parked.
- Trunk Lockout Service
Opening locked trunks when keys are lost or locked inside.
- Laser Cut Key
Cutting high-security sidewinder/laser-cut keys.
- Transponder Key Programming
Programming chip keys for vehicles with immobilizer systems.
- Car Door Lock Repair
Repairing vehicle door lock cylinders and mechanisms.
1994 Acura Integra keys near Rolling Hills
We make 1994 Acura Integra keys in the communities around Rolling Hills as well. See the main 1994 Acura Integra key replacement page or the Rolling Hills locksmith page.
- 1994 Acura Integra keys in Rancho Palos Verdes
- 1994 Acura Integra keys in Rolling Hills Estates
- 1994 Acura Integra keys in Lomita
- 1994 Acura Integra keys in Palos Verdes Estates
- 1994 Acura Integra keys in Torrance
- 1994 Acura Integra keys in West Carson
- 1994 Acura Integra keys in Carson
- 1994 Acura Integra keys in Redondo Beach
- 1994 Acura Integra keys in Hermosa Beach
- 1994 Acura Integra keys in Lawndale
- 1994 Acura Integra keys in Long Beach
- 1994 Acura Integra keys in Manhattan Beach
1994 Acura Integra key replacement in Rolling Hills: frequently asked questions
Does a 1994 Acura Integra key need programming?
A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.
Can any hardware store copy my 1994 Acura Integra key?
If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.
My Acura key turns in the door but not the ignition. Why?
The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.
What does the blinking green key light on my Acura dashboard mean?
The immobilizer is not recognizing the key’s transponder. The chip may be damaged, the key may be unprogrammed, or another chip key on the ring may be interfering.
Can I program a Acura key myself?
No. The immobilizer requires a diagnostic tool to register keys. Remote buttons on some older models can be paired by a manual sequence, but the chip cannot.
Is a locksmith-made Acura key as good as a dealer key?
Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.
How much does a 1994 Acura Integra key cost?
It depends on the key type for your exact trim and on whether you still have a working key. Call (562) 550-7206 with the year, make and model and we will give you a price range before sending anyone.
Can you program a key I bought online for my 1994 Acura Integra?
We can try, if it is the correct part. We test the chip and frequency first. Many low-cost online keys are the wrong type or locked to another car, so we cannot guarantee a customer-supplied key.
Do I have to tow my 1994 Acura Integra to you?
No. We are a mobile service. The key machines and programming equipment are in the van, and the work is done where the vehicle is parked.
Can you unlock my 1994 Acura Integra if the keys are inside?
Yes. We open vehicles without damage using air wedges and reach tools or by picking the door lock, at any hour.
Is there a travel charge for Rolling Hills?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Rolling Hills, so you know the cost in advance.
How long does it take a locksmith to reach me in Rolling Hills?
It depends on where the nearest technician is and on traffic along Portuguese Bend Road, Crest Road, or Eastfield Drive. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
