Quick answer
The 1998 BMW 7 Series typically uses a transponder chip key: a laser-cut metal key with a coded chip in its head that the immobilizer must recognize before the engine will run. Big Daddy Car Key Replacement makes 1998 BMW 7 Series keys on site in Rosemead, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 1998 BMW 7 Series
- Typical key
- Transponder chip key
- Transponder chip
- Yes
- Blade
- Laser-cut
- Programming
- Required, done on site
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 1998 BMW 7 Series use?
- How we make a 1998 BMW 7 Series key
- How BMW key and immobilizer systems work
- Common BMW key and lock problems
- All keys lost or just need a spare?
- Stranded with your BMW right now?
- 1998 BMW 7 Series key replacement across Rosemead
- Getting a 1998 BMW 7 Series key made, step by step
- What to have ready
- Mobile locksmith or dealership for a BMW key?
- What affects the cost of a 1998 BMW 7 Series key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers in Rosemead choose Big Daddy
- Looking after your BMW key
- Choosing a car locksmith you can trust
- Other BMW 7 Series years
- Other BMW models
- Related automotive locksmith services in Rosemead
- 1998 BMW 7 Series keys near Rosemead
- 1998 BMW 7 Series key replacement in Rosemead: frequently asked questions
What kind of key does a 1998 BMW 7 Series use?
The 1998 BMW 7 Series typically uses a transponder chip key: a laser-cut metal key with a coded chip in its head that the immobilizer must recognize before the engine will run.
Transponder chip key
A transponder key looks like an ordinary key with a plastic head, but the head holds a tiny chip with no battery. When you turn the ignition, an antenna ring around the lock energizes the chip and asks for its code. If the immobilizer recognizes the answer, it lets the engine run. If not, the engine cranks without starting or starts and dies within seconds.

How we make a 1998 BMW 7 Series key
For the 1998 BMW 7 Series we cut the blade to code, then program the chip. Where a working key exists, its data can often be cloned or used to authorize a new key quickly. When every key is lost, we connect to the car through the diagnostic port, obtain security access, and register new keys directly to the immobilizer. A spare transponder key is usually done in 15 to 30 minutes. An all-keys-lost job takes longer, commonly 30 to 60 minutes, because security access takes time on many systems.
This page covers the 1998 model year. For other years, see the BMW 7 Series key replacement overview, or browse all BMW models.
How BMW key and immobilizer systems work
BMW and Mini immobilizers are named for the module that holds the key data: EWS on cars from the mid-1990s, CAS from the mid-2000s, and FEM or BDC on later F- and G-series cars. Each key occupies one of a fixed number of slots and is individually encrypted to the car. Making a key means reading the module’s security data and writing a new key to a free slot.
BMW moved from EWS chip keys to the CAS slot-fob system in the mid-2000s and then to FEM and BDC modules with Comfort Access. Each generation needs different equipment, and the newest G-series cars often require a dealer-ordered key.
Common BMW key and lock problems
These are the issues we see most often on BMW vehicles in Rosemead:
- Comfort Access fobs that stop being detected as the internal battery ages
- Slot-type fobs that are not read by a worn ignition dock
- Lost keys on FEM and BDC cars, which require module programming
- G-series vehicles whose keys are dealer-order only
All keys lost or just need a spare?
There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.
Stranded with your BMW right now?
If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.
1998 BMW 7 Series key replacement across Rosemead
Located in Los Angeles County, Rosemead is an incorporated city within our San Gabriel Valley service area. We cover every part of Rosemead, including the Valley Boulevard corridor, the Garvey Avenue corridor, the Rosemead Boulevard corridor, and the Walnut Grove corridor. Wherever you are in town, the technician comes to your door, driveway or parking space. That includes addresses in ZIP code 91770.
Rosemead is a central San Gabriel Valley city of single-family homes, small apartment courts and restaurant-filled shopping plazas, with regular demand for restaurant back-door hardware and home rekeys.
People call us from all over Rosemead, including the areas around the Southern California Edison headquarters, Rosemead Park, Garvey Park, and the Dinsmoor Heritage House. A landmark or cross street helps the technician reach you quickly. Rosemead is served by I-10, SR-60, Rosemead Boulevard, Valley Boulevard, Garvey Avenue, and San Gabriel Boulevard, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
Getting a 1998 BMW 7 Series key made, step by step
Call with the year, make and model
Tell us you need a key for a 1998 BMW 7 Series, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a BMW key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 1998 BMW 7 Series key
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
Price depends on the chip type, whether you still have a working key, and how the vehicle grants programming access. Adding a spare while one key still works is always the cheaper job. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
Situations we are called to most often
- A used car was sold with one worn key and no spare.
- The only key to the car is lost somewhere between the beach, the restaurant and home.
- The dash reads "key not detected" and the start button does nothing.
- The ignition will not turn and the key will not come out.
- A hardware-store copy opens the door but the engine will not start.
Why drivers in Rosemead choose Big Daddy
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Rosemead.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.

Looking after your BMW key
The chip is durable but not indestructible. Keys that have been crushed, soaked or overheated can keep turning the lock while no longer starting the car. Keep a programmed spare somewhere safe.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
- Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
- Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
- Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
Choosing a car locksmith you can trust
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
Other BMW 7 Series years
- 2026 7 Series
- 2025 7 Series
- 2024 7 Series
- 2023 7 Series
- 2022 7 Series
- 2021 7 Series
- 2020 7 Series
- 2019 7 Series
- 2018 7 Series
- 2017 7 Series
- 2016 7 Series
- 2015 7 Series
- 2014 7 Series
- 2013 7 Series
- 2012 7 Series
- 2011 7 Series
- 2010 7 Series
- 2009 7 Series
- 2008 7 Series
- 2007 7 Series
- 2006 7 Series
- 2005 7 Series
- 2004 7 Series
- 2003 7 Series
- 2002 7 Series
- 2001 7 Series
- 2000 7 Series
- 1999 7 Series
- 1997 7 Series
- 1996 7 Series
- 1995 7 Series
- 1994 7 Series
- 1993 7 Series
- 1992 7 Series
- 1991 7 Series
- 1990 7 Series
Other BMW models
- BMW 3 Series keys
- BMW 5 Series keys
- BMW X5 keys
- BMW Z4 keys
- BMW X3 keys
- BMW X6 keys
- BMW 6 Series keys
- BMW 8 Series keys
- BMW X1 keys
- BMW 2 Series keys
- BMW 4 Series keys
- BMW X4 keys
- BMW X2 keys
Related automotive locksmith services in Rosemead
- Laser Cut Key
Cutting high-security sidewinder/laser-cut keys.
- Car Lockout
Unlocking vehicles when keys are locked inside.
- Car Key Cutting
Cutting standard, high-security and laser-cut automotive keys.
- Push-to-Start Key Programming
Programming proximity keys for push-button ignition vehicles.
- Transponder Key Programming
Programming chip keys for vehicles with immobilizer systems.
- Broken Car Key Extraction
Removing broken keys from ignitions, door locks, trunks and glove boxes.
- Smart Key Replacement
Replacing push-to-start smart keys and proximity keys.
- Trunk Lockout Service
Opening locked trunks when keys are lost or locked inside.
1998 BMW 7 Series keys near Rosemead
We make 1998 BMW 7 Series keys in the communities around Rosemead as well. See the main 1998 BMW 7 Series key replacement page or the Rosemead locksmith page.
- 1998 BMW 7 Series keys in Temple City
- 1998 BMW 7 Series keys in San Gabriel
- 1998 BMW 7 Series keys in South El Monte
- 1998 BMW 7 Series keys in El Monte
- 1998 BMW 7 Series keys in Monterey Park
- 1998 BMW 7 Series keys in Alhambra
- 1998 BMW 7 Series keys in San Marino
- 1998 BMW 7 Series keys in Arcadia
- 1998 BMW 7 Series keys in Montebello
- 1998 BMW 7 Series keys in South Pasadena
- 1998 BMW 7 Series keys in Sierra Madre
- 1998 BMW 7 Series keys in Monrovia
1998 BMW 7 Series key replacement in Rosemead: frequently asked questions
Does my 1998 BMW 7 Series key have a chip?
Most were built with a transponder chip in the key head. A security light on the dash, or a plain metal copy that turns the ignition without starting the engine, confirms it. We verify on site before cutting.
Can I program a 1998 BMW 7 Series key myself?
Some vehicles allow a new key to be added using one or two existing programmed keys and a timed ignition sequence. With no working key, or on systems without that feature, diagnostic equipment is required.
Why does my BMW crank but not start with the new copy?
The copy was cut but never programmed, so the immobilizer does not recognize it. The blade is fine; the chip needs to be registered to the car or replaced with the correct type.
Can a locksmith make a BMW key without the dealer?
For most EWS, CAS and FEM/BDC vehicles, yes. We read the security data and program a new key on site. The newest systems are restricted to dealer-supplied keys.
How many keys can a BMW have?
Typically up to ten key slots exist per car. A lost key’s slot can be disabled so it will no longer start the engine.
How many keys should I have for my 1998 BMW 7 Series?
At least two. With two working keys you are never stranded, and on some makes two keys let you add another yourself.
Can you program a key I bought online for my 1998 BMW 7 Series?
We can try, if it is the correct part. We test the chip and frequency first. Many low-cost online keys are the wrong type or locked to another car, so we cannot guarantee a customer-supplied key.
Is a locksmith-made BMW key as good as a dealer key?
Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.
Can you make a 1998 BMW 7 Series key at night or on a weekend?
Yes. We are open 24 hours, seven days a week, including holidays, which is when dealership parts and service departments are closed.
Will my lost 1998 BMW 7 Series key still start the car?
For chip and smart keys we can usually erase lost keys from the car’s memory during programming, so they no longer start the engine. A lost key could still open the door mechanically unless the locks are rekeyed.
Can you make car keys in Rosemead?
Yes. We cut and program car keys on site anywhere in Rosemead, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Which parts of Rosemead do you serve?
All of Rosemead, including the Valley Boulevard corridor, the Garvey Avenue corridor, the Rosemead Boulevard corridor, and the Walnut Grove corridor, and addresses in ZIP code 91770.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
