Quick answer
Lock Installation: Installing new locks on doors that need added security, including exterior doors, bedroom doors, home offices, gates and garage access doors. Big Daddy Car Key Replacement provides lock installation service in Santa Fe Springs as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Lock Installation
- Area
- Santa Fe Springs, Los Angeles County, CA (90670)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Residential Locksmith Services
- Phone
- (562) 550-7206
On this page
- About our lock installation service
- Customers we serve in Santa Fe Springs
- Signs you need lock installation service
- Lock Installation across Santa Fe Springs
- How our lock installation service works
- Situations we handle regularly
- Equipment and hardware on the van
- Trade terms explained
- Cost factors for lock installation service
- What you can expect from us
- Advice worth knowing
- Why this is a job for a locksmith
- Our service standards
- Questions to ask any locksmith
- What to have ready when you call
- Aftercare and records
- Related locksmith services in Santa Fe Springs
- Lock Installation near Santa Fe Springs
- Lock Installation in Santa Fe Springs: frequently asked questions
About our lock installation service
Installing new locks on doors that need added security, including exterior doors, bedroom doors, home offices, gates and garage access doors. A fresh installation means drilling and fitting a lock where there was none, or where the door is new. Accuracy matters: the cross bore, edge bore and strike must line up so the bolt throws fully without rubbing. We use a boring jig, chisel the mortises cleanly and test the door under real closing pressure.

Homes change hands, tenants come and go, doors settle and locks wear. For lock installation service in Santa Fe Springs, we bring the workshop to your driveway: rekeying kits, deadbolts, locksets, strike plates and key machines. You get a clear recommendation, a price before work begins, and locks that are tested with you before we leave.
Customers we serve in Santa Fe Springs
We work for homeowners, tenants, landlords, property managers, real estate agents and short-term rental hosts in Santa Fe Springs. New buyers want every lock rekeyed before moving in, landlords need quick turnovers between tenants, families want one key for the whole house, and older residents often ask for hardware that is easier to operate. Each has slightly different priorities, and we tailor the recommendation accordingly.
This service is part of our residential locksmith services in Santa Fe Springs.
Signs you need lock installation service
These are the most common reasons customers in Santa Fe Springs ask for lock installation service:
- A door has a knob but no deadbolt
- You added a home office or rental unit
- A new or replacement door arrived without hardware
- A garage entry or side door has no lock
Lock Installation across Santa Fe Springs
Located in Los Angeles County, Santa Fe Springs is an incorporated city within our Gateway Cities service area. Customers anywhere in Santa Fe Springs, including the Telegraph Road corridor, the industrial district along Norwalk Boulevard, the Heritage Park neighborhood, and the Carmenita corridor, can have a mobile technician sent directly to them. Service is available throughout ZIP code 90670.
Santa Fe Springs is about four-fifths industrial, with thousands of businesses in warehouses and manufacturing plants, so master key systems, exit devices and fleet key programs dominate.
Whether you are at home, at work, or stuck near Heritage Park, the Clarke Estate, the Santa Fe Springs Swap Meet, or the Santa Fe Springs Town Center, tell the dispatcher the nearest landmark and we will find you. Santa Fe Springs is served by I-5, I-605, Telegraph Road, Florence Avenue, Norwalk Boulevard, and Carmenita Road, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
How our lock installation service works
A short phone consultation
Tell us what is happening and how many doors are involved. From that we can usually give a price range and suggest whether rekeying, repair or replacement fits best.
On-site inspection
The technician looks at each lock, the door, the frame and the strike plate. Problems blamed on a lock are often caused by a sagging door or a loose strike, and it pays to find that first.
Clear options and a firm price
You hear what can be repaired, what should be replaced and what is optional, with a price for each, before any work begins.
The work is done at your door
Cylinders are rekeyed, locks installed or repaired, strikes reinforced and keys cut in the van outside. Most homes are finished in under two hours.
Every lock is tested with you
You try each key in each lock with the door open and closed. Bolts should extend fully and turn with two fingers.
Keys and advice are handed over
You receive the new keys, and we note anything worth watching, such as a worn hinge or a door that will need adjusting when the weather changes.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Situations we handle regularly
- A back door has only a locking knob, which can be slipped or forced in seconds.
- An older parent is having trouble with a round knob and needs lever handles.
- You have just closed on a house and have no idea how many keys the previous owners handed out.
- A handbag with house keys and a driver’s license was stolen from a car.
- Each door in the house takes a different key and the ring keeps growing.
- The front door deadbolt has become stiff and now needs a shoulder against the door to lock.
- A roommate, partner or tenant has moved out and still has a key.
Equipment and hardware on the van
Residential security in Southern California runs largely on two keyways, Kwikset KW1 and Schlage SC1, plus premium lines such as Baldwin, Emtek and Yale. Our vans carry rekeying pins for all of them, single- and double-cylinder deadbolts in common finishes, keyed entry knobs and levers, privacy and passage sets, latches, reinforced strike plates, door wrap plates and hinge screws. For higher security we install cylinders with hardened inserts and restricted keys.
Trade terms explained
- Keyed alike
- Several locks set to operate with the same key.
- Strike plate
- The metal plate on the door frame that the latch or bolt enters when the door is closed.
- Single and double cylinder
- A single-cylinder deadbolt has a key outside and a thumbturn inside; a double-cylinder model needs a key on both sides.
- Keyway
- The shape of the slot a key slides into. Kwikset KW1 and Schlage SC1 are the most common in local homes.
- Rekeying
- Replacing the pins in a lock cylinder so a new key works and previous keys do not, without changing the hardware.
- Backset
- The distance from the door edge to the center of the lock hole, normally 2⅜ or 2¾ inches.
- Deadbolt
- A lock whose solid bolt is moved only by a key or thumbturn, so it cannot be pushed back like a spring latch.
- ANSI/BHMA grade
- A performance rating for locks: Grade 1 is the strongest and most durable, Grade 2 is solid residential quality, Grade 3 is basic.
Cost factors for lock installation service
- Grade and brand of hardware
- A Grade 1 deadbolt costs more than Grade 3, and high-security or designer hardware more again. The front and back doors are where better hardware pays off.
- Smart or electronic features
- Keypad and smart locks cost more than mechanical ones and take longer to set up, especially when the door needs aligning so the motor can throw the bolt.
- Condition of door and frame
- A split jamb, stripped hinge screws or a swollen door has to be corrected for a lock to work properly, and that adds labor.
- Door preparation
- Fitting a lock to existing holes is quick. Boring a new door, enlarging old holes or repairing a damaged edge takes additional time.
- Rekey, repair or replace
- Rekeying is the least expensive, a repair usually sits in the middle, and new hardware costs the most. We recommend the cheapest option that solves the actual problem.
- Number of locks
- Rekeying and installation are priced per lock, with the service call covering the visit. Doing every door in one visit costs less per lock than separate trips.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
What you can expect from us
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Santa Fe Springs.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.

Advice worth knowing
- Rekey as soon as you get the keys to a new home. Builders, agents, cleaners and previous owners may all have copies.
- Fit a deadbolt with a one-inch throw on every exterior door, including the door from the garage into the house.
- When buying new hardware, check that the ANSI/BHMA grade is printed on the package.
- Do not hide a spare under a mat, a rock or a planter. Use a lock box or leave a key with a neighbor.
- Add a secondary lock to sliding glass doors, and anti-lift blocks in the upper track.
- Have all compatible locks keyed alike. One key is easier to carry and easier to keep track of.
- Keep a record of who holds keys. When that list becomes uncertain, it is time to rekey.
- If a key begins to stick, have it looked at. Sticking is the usual warning before a lock fails completely.
Why this is a job for a locksmith
Installing or rekeying a lock looks simple in a video, and sometimes it is. The problems appear at the edges: a bolt that does not fully extend and therefore is not deadlocked, a strike held by half-inch screws, pins dropped during a rekey, a latch installed upside down. A locksmith does this work daily, carries the parts to correct what turns up, and leaves you with a door that has been tested under real conditions.
Our service standards
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
Questions to ask any locksmith
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Get an itemized receipt showing labor, parts and the business details.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
What to have ready when you call
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Aftercare and records
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Santa Fe Springs
Customers who need lock installation service often ask about these as well. Each can usually be handled in the same visit to Santa Fe Springs.
- Apartment Lockout
Unlocking apartment unit doors for tenants who are locked out, day or night.
- Lock Repair
Repairing locks that are sticky, jammed, loose, misaligned or difficult to operate.
- Lock Maintenance
Lubricating, adjusting, tightening and servicing locks to extend their life and improve operation.
- Security Door Lock Service
Installing, repairing and rekeying locks for security screen doors and metal security doors.
- Deadbolt Installation
Installing single-cylinder, double-cylinder, high-security or smart deadbolts.
- Emergency Home Lockout
Fast help when a homeowner or tenant is locked out of a house, apartment, condo or rental property.
- Lock Rekey
Changing the internal pins of an existing lock so old keys no longer work. Ideal after moving in, tenant changes, lost keys or employee turnover.
- Door Handle Lock Repair
Repairing broken, loose, jammed or malfunctioning door handles and lever locks.
- Sliding Door Lock Repair
Fixing sliding door lock mechanisms, handles, rollers, latches and alignment issues.
- Tenant Move-Out Rekey
Rekeying locks after tenants move out to protect property owners and new occupants.
- Ignition Repair
Repairing ignition cylinders that are stuck, worn or will not turn.
- High Security Locks
Locks engineered to resist picking, bumping, drilling and unauthorized key copying.
- Commercial Door Hardware
Supplying and installing commercial-grade levers, pulls, hinges, closers, exit devices, strikes and protective plates.
- Storefront Lock Repair
Repairing locks on glass storefront doors, aluminum doors and commercial entryways.
- Master Key System
Creating a key hierarchy where owners, managers and employees have different levels of access.
Lock Installation near Santa Fe Springs
We provide the same lock installation service in the communities around Santa Fe Springs. See the main lock installation page or the full list of service areas.
- Lock Installation in Pico Rivera
- Lock Installation in Downey
- Lock Installation in Norwalk
- Lock Installation in Whittier
- Lock Installation in Bell Gardens
- Lock Installation in La Mirada
- Lock Installation in Bellflower
- Lock Installation in Montebello
- Lock Installation in Artesia
- Lock Installation in Commerce
- Lock Installation in Cudahy
- Lock Installation in Paramount
Lock Installation in Santa Fe Springs: frequently asked questions
Can you install a lock on a door that has never had one?
Yes. We bore the door and frame with a jig, mortise the latch and strike, and fit the lock so it operates smoothly. This works on wood, fiberglass and most metal doors.
What lock brands do you work with?
We service and install the common residential brands found in Southern California homes, including Schlage, Kwikset, Baldwin, Yale, Emtek and Weiser, along with high-security lines.
Can all my doors use the same key?
Yes, if the locks share a keyway or can be fitted with cylinders that do. Mixed brands can often be brought onto one key by swapping a cylinder or two.
Should I rekey or replace the locks in my Santa Fe Springs home?
Rekey when the locks are in good condition and you simply need old keys to stop working. Replace when locks are worn, damaged, low grade, or you want new features. We look at each lock and tell you which makes sense.
What is the most secure type of front door lock?
A Grade 1 deadbolt with a hardened one-inch bolt, installed with a reinforced strike plate screwed into the wall stud. A high-security cylinder adds pick, bump and key-copy protection.
How long does a typical residential job take?
A lockout takes minutes. Rekeying a house usually takes under an hour, and installing several new deadbolts one to two hours.
Can you install locks I bought myself?
Yes. We install customer-supplied locks and check that they suit the door. If a lock is defective or the wrong size, we will tell you before fitting it.
Do you provide service for landlords and tenants?
Yes. We rekey between tenants, handle tenant lockouts with proper verification, and replace mailbox locks. Tenants should check their lease before changing locks.
Can you make car keys in Santa Fe Springs?
Yes. We cut and program car keys on site anywhere in Santa Fe Springs, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Are you open 24 hours in Santa Fe Springs?
Yes. We take calls and dispatch to Santa Fe Springs 24 hours a day, including weekends and holidays.
Do you have a locksmith shop in Santa Fe Springs?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Santa Fe Springs and the rest of the Gateway Cities area. All work is done at your location.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
