Quick answer
Commercial Lock Rekeying: Rekeying locks after employee turnover, lost keys, tenant changes or security concerns. Big Daddy Car Key Replacement provides commercial lock rekeying service in Santa Paula as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Commercial Lock Rekeying
- Area
- Santa Paula, Ventura County, CA (93060)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Commercial Locksmith Services
- Phone
- (562) 550-7206
On this page
- What commercial lock rekeying means
- Who we help in Santa Paula
- When you need commercial lock rekeying service
- Commercial Lock Rekeying across Santa Paula
- Our commercial lock rekeying process, step by step
- Typical calls we receive
- Tools, parts and hardware we carry
- Terms worth knowing
- Cost factors for commercial lock rekeying service
- Why call Big Daddy Car Key Replacement
- Advice worth knowing
- Professional service compared with doing it yourself
- Our service standards
- Choosing a locksmith: a short checklist
- Before you call (562) 550-7206
- Once the work is done
- Related locksmith services in Santa Paula
- Commercial Lock Rekeying near Santa Paula
- Commercial Lock Rekeying in Santa Paula: frequently asked questions
What commercial lock rekeying means
Rekeying locks after employee turnover, lost keys, tenant changes or security concerns. Rekeying a business resets every cylinder to a new key without replacing hardware. It is the fastest way to cut off keys that left with former staff, contractors or a previous tenant. During a rekey we can also reorganize who opens what, moving you from a pile of unrelated keys to a planned master key system.

Every business in Santa Paula eventually faces the same questions. Who has keys? Do the exit doors work? Would the back door survive a pry bar? Our commercial lock rekeying service gives practical answers and carries out the work, usually in a single visit and with as little disruption as possible.
Who we help in Santa Paula
Our commercial customers in Santa Paula include retail shops, restaurants, offices, medical and dental practices, warehouses, schools, places of worship, property management companies and homeowners associations. Some need a one-time rekey after a staffing change, others an ongoing arrangement covering key systems, exit hardware and door maintenance across several sites.
This service is part of our commercial locksmith services in Santa Paula.
When you need commercial lock rekeying service
These are the most common reasons customers in Santa Paula ask for commercial lock rekeying service:
- A manager or keyholder was terminated
- You took over a space from another tenant
- A key ring was lost or stolen
- Nobody is sure how many keys exist
Commercial Lock Rekeying across Santa Paula
Located in Ventura County, Santa Paula is an incorporated city within our service area. We cover every part of Santa Paula, including Historic Downtown Santa Paula, the Oaks, the Harvard Boulevard corridor, the airport district, and East Area One. Wherever you are in town, the technician comes to your door, driveway or parking space. That includes addresses in ZIP code 93060.
Santa Paula, the “Citrus Capital of the World,” has a well-preserved Main Street and Victorian and Craftsman homes, where storefront mortise locks and vintage residential hardware need knowledgeable repair.
Whether you are at home, at work, or stuck near Santa Paula Airport and the Aviation Museum, the California Oil Museum, the downtown Main Street murals, the Santa Paula train depot, or Steckel Park, tell the dispatcher the nearest landmark and we will find you. Technicians usually reach Santa Paula by SR-126, SR-150, Main Street, Harvard Boulevard, Peck Road, and Telegraph Road. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
Our commercial lock rekeying process, step by step
Discuss the need and the site
We ask about the type of business, the doors involved and any deadline, such as an inspection, a tenant move-in or a termination. Photos of the doors help us arrive with the right parts.
Verify authority
Work on a commercial property is done for the owner, the tenant of record, or the property manager. We confirm that before any lock is opened or changed.
Survey the openings
Each door is checked for lock type and function, closer, hinges or pivots, exit hardware and fire rating, so the solution fits both the security need and the code.
Agree scope and price
You receive a clear scope: which doors, what hardware, how many keys, and the cost. For key systems we draft the hierarchy for your approval first.
Carry out the work around your schedule
Rekeys, repairs and installations are done before opening, after closing or during quiet hours when that suits the business better.
Test, document and hand over
Every door is tested for locking, latching and free exit. Keys are stamped and counted, and for master systems you receive a record of what opens what.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Typical calls we receive
- A manager is let go and returns only some of the keys issued.
- You are taking over a suite and need the previous tenant’s keys cut off before move-in.
- The back door shows pry marks around the latch after the weekend.
- The storefront door will not latch and the shop cannot be left for the night.
- Staff need access to the sales floor but not the office, stockroom or IT closet.
- A fire inspection notes that the rear exit has a slide bolt and no panic hardware.
- A closer has failed and the front door slams hard enough to rattle the glass.
Tools, parts and hardware we carry
Commercial doors use purpose-built hardware. Aluminum storefronts typically carry Adams Rite-style deadlatches and hook bolts driven by a mortise cylinder. Hollow metal and wood doors use Grade 1 cylindrical levers or mortise locks from makers such as Schlage, Sargent, Corbin Russwin and Yale. Exits use panic and fire exit devices, and closers from LCN, Norton and similar makers control the swing. Interchangeable cores allow fast rekeying. We stock the common cylinders, cams, tailpieces, lock bodies and closers.
Terms worth knowing
- Restricted keyway
- A key profile whose blanks are supplied only to authorized locksmiths, preventing unauthorized copies.
- Exit device
- Panic or fire exit hardware that unlatches a door when the horizontal bar is pushed.
- Mortise lock
- A heavy-duty lock housed in a pocket cut into the door edge, combining latch and deadbolt in one case.
- Master key system
- A planned arrangement in which each lock has its own key and a master key opens all of them.
- Interchangeable core
- A removable lock core that a control key releases, allowing a door to be rekeyed in seconds.
- Cylindrical lock
- A lock installed through a round bore in the door, with the mechanism in the lever or knob assembly.
- Door closer
- A hydraulic device that closes a door at a controlled speed and holds it latched.
- Lock function
- How a lock behaves, such as entry, storeroom, classroom or passage, which determines when it is locked and who can lock it.
Cost factors for commercial lock rekeying service
- Electrified hardware
- Doors tied to access control, electric strikes or maglocks need wiring and coordination that add time.
- Hardware grade and function
- Grade 1 mortise locks and exit devices cost more than cylindrical levers, and they last far longer on busy doors.
- Code and fire-rating requirements
- Fire-rated openings need listed hardware, and exits may need panic devices. Compliance can dictate the product.
- Restricted or high-security keys
- Patented keyways and high-security cylinders cost more per cylinder and per key, in exchange for real control over duplication.
- Number and type of doors
- Aluminum storefront doors, hollow metal doors and wood office doors use different hardware. Pricing reflects how many openings are involved and what each requires.
- After-hours scheduling
- Work outside normal hours avoids disruption and may be priced differently. We quote both where it matters.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
Why call Big Daddy Car Key Replacement
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Santa Paula.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.

Advice worth knowing
- Give each employee access only to the doors their job requires.
- Have storefront pivots and closers serviced before the door starts dragging. It is cheaper than replacing a damaged lock.
- Keep a written key log: who holds which key, and the date it was issued and returned.
- Use a restricted keyway if staff copying keys is a concern. A "Do Not Duplicate" stamp alone does not prevent copies.
- Test exit devices and door closers monthly. A door that does not latch is an unlocked door.
- Fit latch guards on out-swinging back doors, where the latch is exposed to prying.
- Store spare keys in a locked key cabinet, not a desk drawer.
- Consider keypad or card access for doors with frequent staff turnover.
Professional service compared with doing it yourself
Commercial doors are regulated in ways that homes are not. The wrong lock function can trap someone inside a storeroom, a deadbolt on an exit can fail an inspection or cost a life, and unlisted hardware can void a fire door’s rating. A commercial locksmith knows the functions, the grades and the applicable codes, keeps your key system mathematically sound, and documents the work so the next change is straightforward.
Our service standards
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
Choosing a locksmith: a short checklist
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Get an itemized receipt showing labor, parts and the business details.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
Before you call (562) 550-7206
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Once the work is done
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Santa Paula
Customers who need commercial lock rekeying service often ask about these as well. Each can usually be handled in the same visit to Santa Paula.
- Commercial Door Hardware
Supplying and installing commercial-grade levers, pulls, hinges, closers, exit devices, strikes and protective plates.
- Retail Store Locksmith Service
Lock repair, rekeying, high-security locks and emergency unlocking for retail stores.
- Door Closer Repair
Adjusting or repairing doors that slam, close too slowly, do not latch or stay open.
- Desk Lock Repair
Repairing locks for desks, drawers and office furniture.
- Panic Bar Installation
Installing panic bars, push bars and crash bars for emergency exits.
- Grand Master Key Systems
Advanced access control where one top-level key opens multiple buildings or departments.
- Restricted Key Systems
Installing key systems that prevent unauthorized key duplication.
- Commercial Lock Installation
Installing heavy-duty locks for business properties.
- Office Lockout Service
Unlocking office doors, private offices, conference rooms, file rooms and storage rooms.
- Mortise Lock Repair
Repairing or replacing worn, jammed or damaged mortise lock systems.
- Gate Lock Repair
Fixing stuck, broken, rusted or misaligned gate locks and latches.
- Mobile Locksmith
A locksmith that comes directly to the customer’s location.
- Mailbox Lock Replacement
Replacing mailbox locks when keys are lost, tenants move out or the lock is damaged.
- Automotive Locksmith
Mobile key, lock and ignition service for cars, trucks, SUVs, vans, motorcycles and fleets.
- Car Key Replacement
Replacing lost, stolen or damaged car keys.
Commercial Lock Rekeying near Santa Paula
We provide the same commercial lock rekeying service in the communities around Santa Paula. See the main commercial lock rekeying page or the full list of service areas.
- Commercial Lock Rekeying in Fillmore
- Commercial Lock Rekeying in Camarillo
- Commercial Lock Rekeying in Ventura
- Commercial Lock Rekeying in Moorpark
- Commercial Lock Rekeying in Ojai
- Commercial Lock Rekeying in Oxnard
- Commercial Lock Rekeying in Port Hueneme
- Commercial Lock Rekeying in Simi Valley
- Commercial Lock Rekeying in Thousand Oaks
- Commercial Lock Rekeying in Westlake Village
- Commercial Lock Rekeying in Agoura Hills
- Commercial Lock Rekeying in West Hills
Commercial Lock Rekeying in Santa Paula: frequently asked questions
How often should a business rekey its locks?
Rekey whenever a keyholder leaves on bad terms, a key is lost, or you take over a new space. Businesses with frequent turnover often switch to a restricted keyway or interchangeable cores so future changes take minutes.
How long does it take to rekey a business?
A small shop or office with a handful of doors usually takes about an hour. Larger sites and master key systems are scheduled by scope.
Can you provide documentation for our records?
Yes. For rekeys and key systems we provide a key schedule listing doors, key numbers and the quantity of keys issued.
What brands of commercial hardware do you service?
We work with the major commercial lines, including Schlage, Sargent, Corbin Russwin, Yale, Best, Adams Rite, Von Duprin, LCN, Norton and Kaba, and can match most existing hardware.
How do we stop employees from copying keys?
Install a restricted key system. Its blanks are available only through the authorized locksmith and copies are cut only for people on your signature list.
Are our exit doors compliant?
We can check that exit doors open with one motion and no key, that panic hardware is present where required, and that closers latch the doors. Final authority rests with your fire marshal or building official.
Who is allowed to authorize lock changes for a business?
The owner, the tenant named on the lease, or the property manager. We verify authority before changing or opening any commercial lock.
Can you work outside our business hours in Santa Paula?
Yes. We are open 24 hours and regularly schedule rekeys, repairs and installations before opening or after closing so customers and staff are not disturbed.
Is there a travel charge for Santa Paula?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Santa Paula, so you know the cost in advance.
Can you make car keys in Santa Paula?
Yes. We cut and program car keys on site anywhere in Santa Paula, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
How long does it take a locksmith to reach me in Santa Paula?
It depends on where the nearest technician is and on traffic along SR-126, SR-150, or Main Street. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
Which areas do you cover?
We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
