Quick answer
Access Control Installation: Installing electronic access systems for offices, warehouses, apartment buildings and commercial facilities. Big Daddy Car Key Replacement provides access control installation service in Sherman Oaks as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Access Control Installation
- Area
- Sherman Oaks, Los Angeles County, CA (91403, 91423)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Access Control & Electronic Lock Services
- Phone
- (562) 550-7206
On this page
- What access control installation involves
- Who uses this service
- Reasons to call for access control installation service
- Access Control Installation across Sherman Oaks
- How our access control installation service works
- Common situations in Sherman Oaks
- Tools, parts and hardware we carry
- Trade terms explained
- Cost factors for access control installation service
- Why Sherman Oaks customers choose Big Daddy
- Tips to avoid problems
- Professional service compared with doing it yourself
- Our service standards
- How to choose a locksmith you can trust
- What to have ready when you call
- After the visit
- Related locksmith services in Sherman Oaks
- Access Control Installation near Sherman Oaks
- Access Control Installation in Sherman Oaks: frequently asked questions
What access control installation involves
Installing electronic access systems for offices, warehouses, apartment buildings and commercial facilities. Access control replaces keys with credentials, cards, fobs, codes or phones, managed from software. Each door gets a reader, an electric lock, a door sensor and a request-to-exit device, wired to a controller. You decide who can enter which door at what times, and see a log of every entry.

Electronic locks replace the question "who has a key?" with a list you control. Our access control installation service in Sherman Oaks covers the whole range, from a single keypad deadbolt on a front door to networked readers on a commercial building, installed correctly and set up so you can manage it yourself.
Who uses this service
Electronic lock and access control customers in Sherman Oaks range from households that want to stop hiding keys, to short-term rental hosts issuing guest codes, to offices, clinics, gyms, apartment buildings and warehouses that need to control and record who enters.
This service is part of our access control & electronic lock services in Sherman Oaks.
Reasons to call for access control installation service
People in Sherman Oaks usually call us for access control installation service in situations like these:
- Rekeying after every staff change is costing you
- You need to know who entered and when
- Different people need different door schedules
- Several doors or sites need central management
Access Control Installation across Sherman Oaks
Located in Los Angeles County, Sherman Oaks is a neighborhood of the City of Los Angeles within our San Fernando Valley service area. We cover every part of Sherman Oaks, including the hills south of Ventura Boulevard, Magnolia Woods, Chandler Estates, and the Sepulveda corridor. Wherever you are in town, the technician comes to your door, driveway or parking space. We serve the 91403 and 91423 ZIP codes.
Sherman Oaks stretches from hillside homes with gated drives to condo towers and offices along Ventura Boulevard, which means smart locks, condo lockouts and commercial rekeys all come up in the same day.
Whether you are at home, at work, or stuck near Sherman Oaks Galleria, Westfield Fashion Square, Van Nuys Sherman Oaks Park, or the Ventura Boulevard restaurant row, tell the dispatcher the nearest landmark and we will find you. Sherman Oaks is served by US-101, I-405, Ventura Boulevard, Sepulveda Boulevard, Van Nuys Boulevard, and Woodman Avenue, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
How our access control installation service works
Discuss how the door is used
Who needs access, how often people change, whether remote control or an entry log is needed, and what the door is made of all shape the right choice.
Check the door and the site
We measure door thickness, backset and bore, check alignment and weather exposure, and for networked products test Wi-Fi strength at the door or plan the wiring.
Recommend equipment
You get a recommendation with the trade-offs explained: keypad or app, Bluetooth or Wi-Fi, standalone or networked, and the cost of each.
Install the hardware
The door is aligned so the bolt moves freely, then the lock, reader, strike or maglock is fitted to the manufacturer’s template and wired or powered.
Program users and settings
Default codes are removed, individual users are created, schedules and auto-lock are set, and firmware is updated.
Train and document
We walk you through adding and deleting users, changing batteries and using the mechanical override, and leave the settings documented.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Common situations in Sherman Oaks
- An apartment building wants to replace a shared entry key with fobs.
- A smart lock reports "jammed" every evening when the door swells.
- Children get home from school before their parents and keep losing keys.
- An office wants to stop rekeying each time an employee leaves.
- A homeowner wants to let a contractor in while at work.
- A business needs to know who entered the stockroom and when.
- A short-term rental needs a new code for every guest.
Tools, parts and hardware we carry
We install and service keypad and smart deadbolts and levers from the major residential makers such as Schlage, Yale, Kwikset and August, and commercial electronic locks and access components including standalone keypad levers, card and fob readers, controllers, electric strikes, electromagnetic locks, request-to-exit sensors, push-to-exit buttons, power supplies with battery backup and door position switches. Matching each component to the door is what makes a system reliable.
Trade terms explained
- Maglock
- An electromagnetic lock that holds a door closed with a magnet and releases when power is cut.
- Electric strike
- A strike plate with a keeper that releases electrically so a locked door can be pushed open.
- Credential
- Whatever identifies a user: a card, fob, PIN, phone or fingerprint.
- Fail-safe and fail-secure
- A fail-safe lock unlocks when power is lost; a fail-secure lock stays locked.
- Request to exit
- A sensor or button that releases an electrically locked door for someone leaving.
- Access control
- A system that decides who may pass through which door at what time, and records each entry.
- Smart lock
- A lock that can be operated by a code, phone or other credential, often with remote control.
- Audit trail
- A stored record of which credential opened a door and when.
Cost factors for access control installation service
- Grade of hardware
- Commercial Grade 1 electronic locks cost more than residential models and are built for far heavier use.
- Wiring and power
- Running cable, adding power supplies and battery backup takes time, especially in finished buildings.
- Type of system
- A standalone keypad lock is the least expensive. Smart locks cost more, and wired access control with readers and controllers the most.
- Door condition
- Doors that bind must be corrected first. Motorized locks cannot overcome friction that a hand can.
- Life-safety requirements
- Maglocks and controlled exits need release devices and sometimes fire alarm connections to meet code.
- Number of doors
- Each controlled door needs its own lock hardware and, for wired systems, cabling back to a controller.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
Why Sherman Oaks customers choose Big Daddy
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.

Tips to avoid problems
- Give each person their own code or credential so access can be removed individually.
- Wipe touchscreens occasionally so smudges do not reveal the digits in your code.
- Check that the door closes and latches on its own. Auto-lock cannot secure a door that is ajar.
- Turn on two-factor authentication for any account that can unlock your door.
- Avoid obvious codes such as birth years, addresses or repeated digits.
- Keep firmware up to date. Updates often fix security issues.
- Keep the mechanical override key somewhere accessible outside the locked area.
- Use fresh, name-brand alkaline batteries. Many locks misread rechargeable cells.
Professional service compared with doing it yourself
Most complaints about electronic locks trace back to installation: a door out of alignment, a strike that pinches the bolt, a Wi-Fi bridge out of range, default codes left active, or a maglock installed without the release devices the code requires. A locksmith addresses the mechanical side first, then the electronics, and leaves a system that works every day and still lets people out safely when power is lost.
Our service standards
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
How to choose a locksmith you can trust
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Get an itemized receipt showing labor, parts and the business details.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
What to have ready when you call
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
After the visit
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Sherman Oaks
Customers who need access control installation service often ask about these as well. Each can usually be handled in the same visit to Sherman Oaks.
- Access Code Programming
Adding, removing or changing access codes.
- Audit Trail Lock Systems
Installing locks that track access history.
- Smart Locks & Keyless Entry
Smart locks, keypad deadbolts and keyless entry systems supplied, installed and set up.
- Magnetic Lock Installation
Installing maglocks for controlled entry doors.
- Wi-Fi Lock Installation
Installing Wi-Fi-enabled locks.
- App-Controlled Lock Setup
Configuring locks that can be controlled by mobile apps.
- Smart Lock Setup
Programming smart locks, connecting apps, setting user codes, deleting old codes and troubleshooting connectivity.
- Intercom Lock Integration
Connecting locks with intercom systems for controlled entry.
- Smart Lock Troubleshooting
Fixing app connection issues, keypad issues, battery problems and lock calibration.
- Keyless Entry Installation
Installing keyless entry systems for doors and gates.
- Lock Installation
Installing new locks on doors that need added security, including exterior doors, bedroom doors, home offices, gates and garage access doors.
- Broken Key Extraction
Removing broken keys from door locks, deadbolts, mailbox locks, gates and other lock cylinders.
- Transponder Key Programming
Programming chip keys for vehicles with immobilizer systems.
- Ignition Repair
Repairing ignition cylinders that are stuck, worn or will not turn.
- Lock Rekey
Changing the internal pins of an existing lock so old keys no longer work. Ideal after moving in, tenant changes, lost keys or employee turnover.
Access Control Installation near Sherman Oaks
We provide the same access control installation service in the communities around Sherman Oaks. See the main access control installation page or the full list of service areas.
- Access Control Installation in Van Nuys
- Access Control Installation in Valley Glen
- Access Control Installation in Encino
- Access Control Installation in Valley Village
- Access Control Installation in Studio City
- Access Control Installation in Lake Balboa
- Access Control Installation in North Hollywood
- Access Control Installation in Panorama City
- Access Control Installation in Toluca Lake
- Access Control Installation in Beverly Hills
- Access Control Installation in Reseda
- Access Control Installation in Tarzana
Access Control Installation in Sherman Oaks: frequently asked questions
How does an access control system work?
A reader checks a credential with a controller, which releases an electric lock if that person is allowed through that door at that time. The event is logged, and access can be changed or revoked instantly in software.
Can you install a lock I already bought?
Yes. We install customer-supplied locks, correct the door alignment they depend on, and complete the app setup.
Can smart locks be hacked?
Reputable brands use strong encryption, and real-world break-ins overwhelmingly involve force, not hacking. Strong passwords, two-factor authentication and updated firmware keep the risk low.
Can access be limited to certain days and times?
Yes. Most smart locks and all access control systems support schedules, temporary codes and automatic expiry.
Do I need Wi-Fi for a keypad lock?
No. A standalone keypad lock works with no network at all. Wi-Fi is needed only for remote control and notifications.
How many users can an electronic lock hold?
Residential keypad locks typically hold from a couple of dozen to a few hundred codes. Commercial systems manage thousands of users.
What happens if the batteries or power fail?
Battery locks warn you for weeks and have a key or external power option. Wired systems should have battery backup, and exits are designed to release safely.
Which smart lock is best for a home in Sherman Oaks?
It depends on the door and how you want to use it. A keypad deadbolt suits most households. Add Wi-Fi if you need remote control, or choose Bluetooth for longer battery life. We recommend models after seeing the door.
Are you open 24 hours in Sherman Oaks?
Yes. We take calls and dispatch to Sherman Oaks 24 hours a day, including weekends and holidays.
How long does it take a locksmith to reach me in Sherman Oaks?
It depends on where the nearest technician is and on traffic along US-101, I-405, or Ventura Boulevard. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Can you make car keys in Sherman Oaks?
Yes. We cut and program car keys on site anywhere in Sherman Oaks, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
