Quick answer
Electric Strike Installation: Installing electric strikes for buzz-in entry systems. Big Daddy Car Key Replacement provides electric strike installation service in Sierra Madre as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Electric Strike Installation
- Area
- Sierra Madre, Los Angeles County, CA (91024)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Access Control & Electronic Lock Services
- Phone
- (562) 550-7206
On this page
- What electric strike installation involves
- Who uses this service
- Reasons to call for electric strike installation service
- Electric Strike Installation across Sierra Madre
- Our electric strike installation process, step by step
- Typical calls we receive
- What our technicians bring
- A short glossary
- What affects the cost of electric strike installation service
- Why Sierra Madre customers choose Big Daddy
- Practical advice from our locksmiths
- Doing it yourself versus calling a professional
- Our service standards
- Questions to ask any locksmith
- How to prepare for the visit
- Once the work is done
- Related locksmith services in Sierra Madre
- Electric Strike Installation near Sierra Madre
- Electric Strike Installation in Sierra Madre: frequently asked questions
What electric strike installation involves
Installing electric strikes for buzz-in entry systems. An electric strike replaces the fixed strike in the frame with one whose keeper releases electrically, letting the door be pushed open while the lock stays locked. It works with your existing lockset or exit device, keeps the door latched during a power loss when set fail-secure, and is the standard choice for buzz-in doors.

A smart lock or access system is only as good as its installation. The door must be aligned, the hardware matched to the opening, and the software configured with sensible codes and permissions. Our electric strike installation service in Sierra Madre takes care of each part and shows you how to use it.
Who uses this service
Electronic lock and access control customers in Sierra Madre range from households that want to stop hiding keys, to short-term rental hosts issuing guest codes, to offices, clinics, gyms, apartment buildings and warehouses that need to control and record who enters.
This service is part of our access control & electronic lock services in Sierra Madre.
Reasons to call for electric strike installation service
These are the most common reasons customers in Sierra Madre ask for electric strike installation service:
- You want to buzz visitors in from a desk
- An access system is being added to an existing lock
- The door must stay locked if power fails
- A panic-bar door needs electric release
Electric Strike Installation across Sierra Madre
Sierra Madre is an incorporated city in Los Angeles County, part of the San Gabriel Valley area we cover every day. Our electric strike installation service reaches all of Sierra Madre, including Kersting Court, the Canyon, the Upper Hastings edge, and the Sierra Madre Boulevard corridor, as well as the streets in between. You do not need to bring anything to a shop. That includes addresses in ZIP code 91024.
Sierra Madre is a small foothill village with no traffic signals and many century-old cottages, where vintage rim locks, skeleton keys and settling door frames call for patient repair work.
Whether you are at home, at work, or stuck near Kersting Court, Sierra Madre Memorial Park, the Mount Wilson Trail, Bailey Canyon Wilderness Park, or the Sierra Madre Playhouse, tell the dispatcher the nearest landmark and we will find you. Technicians usually reach Sierra Madre by Sierra Madre Boulevard, Baldwin Avenue, Michillinda Avenue, Grand View Avenue, Orange Grove Avenue, and I-210. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
Our electric strike installation process, step by step
Discuss how the door is used
Who needs access, how often people change, whether remote control or an entry log is needed, and what the door is made of all shape the right choice.
Check the door and the site
We measure door thickness, backset and bore, check alignment and weather exposure, and for networked products test Wi-Fi strength at the door or plan the wiring.
Recommend equipment
You get a recommendation with the trade-offs explained: keypad or app, Bluetooth or Wi-Fi, standalone or networked, and the cost of each.
Install the hardware
The door is aligned so the bolt moves freely, then the lock, reader, strike or maglock is fitted to the manufacturer’s template and wired or powered.
Program users and settings
Default codes are removed, individual users are created, schedules and auto-lock are set, and firmware is updated.
Train and document
We walk you through adding and deleting users, changing batteries and using the mechanical override, and leave the settings documented.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Typical calls we receive
- An office wants to stop rekeying each time an employee leaves.
- Children get home from school before their parents and keep losing keys.
- A short-term rental needs a new code for every guest.
- A homeowner wants to let a contractor in while at work.
- A business needs to know who entered the stockroom and when.
- An apartment building wants to replace a shared entry key with fobs.
- A smart lock reports "jammed" every evening when the door swells.
What our technicians bring
We install and service keypad and smart deadbolts and levers from the major residential makers such as Schlage, Yale, Kwikset and August, and commercial electronic locks and access components including standalone keypad levers, card and fob readers, controllers, electric strikes, electromagnetic locks, request-to-exit sensors, push-to-exit buttons, power supplies with battery backup and door position switches. Matching each component to the door is what makes a system reliable.
A short glossary
- Credential
- Whatever identifies a user: a card, fob, PIN, phone or fingerprint.
- Access control
- A system that decides who may pass through which door at what time, and records each entry.
- Smart lock
- A lock that can be operated by a code, phone or other credential, often with remote control.
- Maglock
- An electromagnetic lock that holds a door closed with a magnet and releases when power is cut.
- Audit trail
- A stored record of which credential opened a door and when.
- Request to exit
- A sensor or button that releases an electrically locked door for someone leaving.
- Fail-safe and fail-secure
- A fail-safe lock unlocks when power is lost; a fail-secure lock stays locked.
- Electric strike
- A strike plate with a keeper that releases electrically so a locked door can be pushed open.
What affects the cost of electric strike installation service
- Type of system
- A standalone keypad lock is the least expensive. Smart locks cost more, and wired access control with readers and controllers the most.
- Number of doors
- Each controlled door needs its own lock hardware and, for wired systems, cabling back to a controller.
- Wiring and power
- Running cable, adding power supplies and battery backup takes time, especially in finished buildings.
- Software and credentials
- Cloud subscriptions, cards and fobs are ongoing or per-user costs worth understanding at the start.
- Life-safety requirements
- Maglocks and controlled exits need release devices and sometimes fire alarm connections to meet code.
- Grade of hardware
- Commercial Grade 1 electronic locks cost more than residential models and are built for far heavier use.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Sierra Madre. The technician confirms the figure before starting.
Why Sierra Madre customers choose Big Daddy
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.

Practical advice from our locksmiths
- Turn on two-factor authentication for any account that can unlock your door.
- Avoid obvious codes such as birth years, addresses or repeated digits.
- Review the user list every few months and remove anyone who no longer needs access.
- Delete factory default codes on the day of installation.
- Check that the door closes and latches on its own. Auto-lock cannot secure a door that is ajar.
- Use fresh, name-brand alkaline batteries. Many locks misread rechargeable cells.
- Wipe touchscreens occasionally so smudges do not reveal the digits in your code.
- Give each person their own code or credential so access can be removed individually.
Doing it yourself versus calling a professional
Most complaints about electronic locks trace back to installation: a door out of alignment, a strike that pinches the bolt, a Wi-Fi bridge out of range, default codes left active, or a maglock installed without the release devices the code requires. A locksmith addresses the mechanical side first, then the electronics, and leaves a system that works every day and still lets people out safely when power is lost.
Our service standards
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Questions to ask any locksmith
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Get an itemized receipt showing labor, parts and the business details.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
How to prepare for the visit
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Once the work is done
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Sierra Madre
Customers who need electric strike installation service often ask about these as well. Each can usually be handled in the same visit to Sierra Madre.
- Keypad Access Control
Installing keypad entry systems for offices and commercial buildings.
- Smart Lock Installation
Installing smart locks, keypad locks, Wi-Fi locks, Bluetooth locks, app-controlled locks and keyless entry systems.
- User Access Management
Setting up different codes for employees, tenants, contractors, family members or guests.
- Bluetooth Lock Installation
Installing Bluetooth-enabled locks.
- Access Control Installation
Installing electronic access systems for offices, warehouses, apartment buildings and commercial facilities.
- Smart Lock Troubleshooting
Fixing app connection issues, keypad issues, battery problems and lock calibration.
- Electronic Lock Installation
Installing electronic locks for homes and businesses.
- Buzzer System Installation
Installing entry buzzers for offices, apartments and secured entrances.
- App-Controlled Lock Setup
Configuring locks that can be controlled by mobile apps.
- Magnetic Lock Installation
Installing maglocks for controlled entry doors.
- Door Closer Repair
Adjusting or repairing doors that slam, close too slowly, do not latch or stay open.
- Lock Replacement
Replacing old, damaged, outdated or unsecured locks with new locks.
- Lock Rekey
Changing the internal pins of an existing lock so old keys no longer work. Ideal after moving in, tenant changes, lost keys or employee turnover.
- Storefront Lock Repair
Repairing locks on glass storefront doors, aluminum doors and commercial entryways.
- Deadbolt Installation
Installing single-cylinder, double-cylinder, high-security or smart deadbolts.
Electric Strike Installation near Sierra Madre
We provide the same electric strike installation service in the communities around Sierra Madre. See the main electric strike installation page or the full list of service areas.
- Electric Strike Installation in Arcadia
- Electric Strike Installation in Monrovia
- Electric Strike Installation in Temple City
- Electric Strike Installation in San Marino
- Electric Strike Installation in Duarte
- Electric Strike Installation in Bradbury
- Electric Strike Installation in Altadena
- Electric Strike Installation in Pasadena
- Electric Strike Installation in San Gabriel
- Electric Strike Installation in Rosemead
- Electric Strike Installation in Alhambra
- Electric Strike Installation in South Pasadena
Electric Strike Installation in Sierra Madre: frequently asked questions
What is the difference between an electric strike and a maglock?
An electric strike releases the latch of a normal lock and can stay locked without power. A maglock holds the door with a magnet and always unlocks when power is lost.
How many users can an electronic lock hold?
Residential keypad locks typically hold from a couple of dozen to a few hundred codes. Commercial systems manage thousands of users.
Can you install a lock I already bought?
Yes. We install customer-supplied locks, correct the door alignment they depend on, and complete the app setup.
Which smart lock is best for a home in Sierra Madre?
It depends on the door and how you want to use it. A keypad deadbolt suits most households. Add Wi-Fi if you need remote control, or choose Bluetooth for longer battery life. We recommend models after seeing the door.
Will an electronic lock work on my existing door?
Most standard doors accept them. Very thick, thin, glass or metal doors need specific models, which we identify during the site check.
Do I need Wi-Fi for a keypad lock?
No. A standalone keypad lock works with no network at all. Wi-Fi is needed only for remote control and notifications.
Can smart locks be hacked?
Reputable brands use strong encryption, and real-world break-ins overwhelmingly involve force, not hacking. Strong passwords, two-factor authentication and updated firmware keep the risk low.
What happens if the batteries or power fail?
Battery locks warn you for weeks and have a key or external power option. Wired systems should have battery backup, and exits are designed to release safely.
Is there a travel charge for Sierra Madre?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Sierra Madre, so you know the cost in advance.
How long does it take a locksmith to reach me in Sierra Madre?
It depends on where the nearest technician is and on traffic along Sierra Madre Boulevard, Baldwin Avenue, or Michillinda Avenue. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Are you open 24 hours in Sierra Madre?
Yes. We take calls and dispatch to Sierra Madre 24 hours a day, including weekends and holidays.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
Which areas do you cover?
We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
