Quick answer
Electric Strike Installation: Installing electric strikes for buzz-in entry systems. Big Daddy Car Key Replacement provides electric strike installation service in Signal Hill as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Electric Strike Installation
- Area
- Signal Hill, Los Angeles County, CA (90755)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Access Control & Electronic Lock Services
- Phone
- (562) 550-7206
On this page
- What electric strike installation means
- Who we help in Signal Hill
- Reasons to call for electric strike installation service
- Electric Strike Installation across Signal Hill
- How our electric strike installation service works
- Common situations in Signal Hill
- Equipment and hardware on the van
- Trade terms explained
- What affects the cost of electric strike installation service
- Why call Big Daddy Car Key Replacement
- Advice worth knowing
- Professional service compared with doing it yourself
- What we commit to
- Questions to ask any locksmith
- How to prepare for the visit
- After the visit
- Related locksmith services in Signal Hill
- Electric Strike Installation near Signal Hill
- Electric Strike Installation in Signal Hill: frequently asked questions
What electric strike installation means
Installing electric strikes for buzz-in entry systems. An electric strike replaces the fixed strike in the frame with one whose keeper releases electrically, letting the door be pushed open while the lock stays locked. It works with your existing lockset or exit device, keeps the door latched during a power loss when set fail-secure, and is the standard choice for buzz-in doors.

Codes, cards, fobs and phones have made keys optional. For electric strike installation service in Signal Hill, call (562) 550-7206. We help you choose equipment that fits the door and the way people use it, install it, and make sure there is always a way in if batteries or power fail.
Who we help in Signal Hill
Electronic lock and access control customers in Signal Hill range from households that want to stop hiding keys, to short-term rental hosts issuing guest codes, to offices, clinics, gyms, apartment buildings and warehouses that need to control and record who enters.
This service is part of our access control & electronic lock services in Signal Hill.
Reasons to call for electric strike installation service
If any of the following sounds familiar, electric strike installation service is likely what you need:
- You want to buzz visitors in from a desk
- An access system is being added to an existing lock
- The door must stay locked if power fails
- A panic-bar door needs electric release
Electric Strike Installation across Signal Hill
Signal Hill is an incorporated city in Los Angeles County, part of the Gateway Cities area we cover every day. Our electric strike installation service reaches all of Signal Hill, including the hilltop neighborhoods, the Cherry Avenue corridor, the Signal Hill Auto Center district, and the Willow Street corridor, as well as the streets in between. You do not need to bring anything to a shop. Service is available throughout ZIP code 90755.
Signal Hill is a small city completely surrounded by Long Beach, with hilltop view condos, a cluster of car dealerships and big-box retail, so car key programming and condo lock service are both routine.
Whether you are at home, at work, or stuck near Hilltop Park, the Signal Hill Auto Center, Discovery Well Park, or the hill’s working oil pumpjacks, tell the dispatcher the nearest landmark and we will find you. Signal Hill is served by I-405, Cherry Avenue, Willow Street, Spring Street, Pacific Coast Highway, and Orange Avenue, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
How our electric strike installation service works
Discuss how the door is used
Who needs access, how often people change, whether remote control or an entry log is needed, and what the door is made of all shape the right choice.
Check the door and the site
We measure door thickness, backset and bore, check alignment and weather exposure, and for networked products test Wi-Fi strength at the door or plan the wiring.
Recommend equipment
You get a recommendation with the trade-offs explained: keypad or app, Bluetooth or Wi-Fi, standalone or networked, and the cost of each.
Install the hardware
The door is aligned so the bolt moves freely, then the lock, reader, strike or maglock is fitted to the manufacturer’s template and wired or powered.
Program users and settings
Default codes are removed, individual users are created, schedules and auto-lock are set, and firmware is updated.
Train and document
We walk you through adding and deleting users, changing batteries and using the mechanical override, and leave the settings documented.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Common situations in Signal Hill
- An office wants to stop rekeying each time an employee leaves.
- A business needs to know who entered the stockroom and when.
- A smart lock reports "jammed" every evening when the door swells.
- Children get home from school before their parents and keep losing keys.
- An apartment building wants to replace a shared entry key with fobs.
- A homeowner wants to let a contractor in while at work.
- A short-term rental needs a new code for every guest.
Equipment and hardware on the van
We install and service keypad and smart deadbolts and levers from the major residential makers such as Schlage, Yale, Kwikset and August, and commercial electronic locks and access components including standalone keypad levers, card and fob readers, controllers, electric strikes, electromagnetic locks, request-to-exit sensors, push-to-exit buttons, power supplies with battery backup and door position switches. Matching each component to the door is what makes a system reliable.
Trade terms explained
- Request to exit
- A sensor or button that releases an electrically locked door for someone leaving.
- Maglock
- An electromagnetic lock that holds a door closed with a magnet and releases when power is cut.
- Electric strike
- A strike plate with a keeper that releases electrically so a locked door can be pushed open.
- Access control
- A system that decides who may pass through which door at what time, and records each entry.
- Audit trail
- A stored record of which credential opened a door and when.
- Credential
- Whatever identifies a user: a card, fob, PIN, phone or fingerprint.
- Smart lock
- A lock that can be operated by a code, phone or other credential, often with remote control.
- Fail-safe and fail-secure
- A fail-safe lock unlocks when power is lost; a fail-secure lock stays locked.
What affects the cost of electric strike installation service
- Number of doors
- Each controlled door needs its own lock hardware and, for wired systems, cabling back to a controller.
- Grade of hardware
- Commercial Grade 1 electronic locks cost more than residential models and are built for far heavier use.
- Life-safety requirements
- Maglocks and controlled exits need release devices and sometimes fire alarm connections to meet code.
- Door condition
- Doors that bind must be corrected first. Motorized locks cannot overcome friction that a hand can.
- Wiring and power
- Running cable, adding power supplies and battery backup takes time, especially in finished buildings.
- Software and credentials
- Cloud subscriptions, cards and fobs are ongoing or per-user costs worth understanding at the start.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Signal Hill. The technician confirms the figure before starting.
Why call Big Daddy Car Key Replacement
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Signal Hill.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.

Advice worth knowing
- Wipe touchscreens occasionally so smudges do not reveal the digits in your code.
- Avoid obvious codes such as birth years, addresses or repeated digits.
- Delete factory default codes on the day of installation.
- Review the user list every few months and remove anyone who no longer needs access.
- Check that the door closes and latches on its own. Auto-lock cannot secure a door that is ajar.
- Give each person their own code or credential so access can be removed individually.
- Use fresh, name-brand alkaline batteries. Many locks misread rechargeable cells.
- Keep firmware up to date. Updates often fix security issues.
Professional service compared with doing it yourself
Most complaints about electronic locks trace back to installation: a door out of alignment, a strike that pinches the bolt, a Wi-Fi bridge out of range, default codes left active, or a maglock installed without the release devices the code requires. A locksmith addresses the mechanical side first, then the electronics, and leaves a system that works every day and still lets people out safely when power is lost.
What we commit to
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Questions to ask any locksmith
- Get an itemized receipt showing labor, parts and the business details.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
How to prepare for the visit
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
After the visit
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Signal Hill
Customers who need electric strike installation service often ask about these as well. Each can usually be handled in the same visit to Signal Hill.
- Commercial Smart Lock Installation
Installing electronic and app-controlled locks for businesses.
- Keypad Lock Installation
Installing keypad deadbolts, digital door locks and electronic entry locks.
- Access Control Installation
Installing electronic access systems for offices, warehouses, apartment buildings and commercial facilities.
- Intercom Lock Integration
Connecting locks with intercom systems for controlled entry.
- Digital Lock Repair
Repairing malfunctioning electronic locks.
- Key Card Access Systems
Installing card reader systems for controlled entry.
- Key Fob Access Systems
Installing and programming key fob systems.
- Smart Lock Installation
Installing smart locks, keypad locks, Wi-Fi locks, Bluetooth locks, app-controlled locks and keyless entry systems.
- Smart Lock Setup
Programming smart locks, connecting apps, setting user codes, deleting old codes and troubleshooting connectivity.
- Smart Locks & Keyless Entry
Smart locks, keypad deadbolts and keyless entry systems supplied, installed and set up.
- Car Key Replacement
Replacing lost, stolen or damaged car keys.
- Lock Rekey
Changing the internal pins of an existing lock so old keys no longer work. Ideal after moving in, tenant changes, lost keys or employee turnover.
- Commercial Door Hardware
Supplying and installing commercial-grade levers, pulls, hinges, closers, exit devices, strikes and protective plates.
- Panic Bar Installation
Installing panic bars, push bars and crash bars for emergency exits.
- Change Locks
Swapping out the locks on your doors for new ones, with new keys, in one visit.
Electric Strike Installation near Signal Hill
We provide the same electric strike installation service in the communities around Signal Hill. See the main electric strike installation page or the full list of service areas.
- Electric Strike Installation in Long Beach
- Electric Strike Installation in Lakewood
- Electric Strike Installation in Hawaiian Gardens
- Electric Strike Installation in Paramount
- Electric Strike Installation in Bellflower
- Electric Strike Installation in Artesia
- Electric Strike Installation in Carson
- Electric Strike Installation in Compton
- Electric Strike Installation in Cerritos
- Electric Strike Installation in West Carson
- Electric Strike Installation in Cypress
- Electric Strike Installation in Norwalk
Electric Strike Installation in Signal Hill: frequently asked questions
What is the difference between an electric strike and a maglock?
An electric strike releases the latch of a normal lock and can stay locked without power. A maglock holds the door with a magnet and always unlocks when power is lost.
Will an electronic lock work on my existing door?
Most standard doors accept them. Very thick, thin, glass or metal doors need specific models, which we identify during the site check.
Can access be limited to certain days and times?
Yes. Most smart locks and all access control systems support schedules, temporary codes and automatic expiry.
Which smart lock is best for a home in Signal Hill?
It depends on the door and how you want to use it. A keypad deadbolt suits most households. Add Wi-Fi if you need remote control, or choose Bluetooth for longer battery life. We recommend models after seeing the door.
How many users can an electronic lock hold?
Residential keypad locks typically hold from a couple of dozen to a few hundred codes. Commercial systems manage thousands of users.
What happens if the batteries or power fail?
Battery locks warn you for weeks and have a key or external power option. Wired systems should have battery backup, and exits are designed to release safely.
Do I need Wi-Fi for a keypad lock?
No. A standalone keypad lock works with no network at all. Wi-Fi is needed only for remote control and notifications.
Can you install a lock I already bought?
Yes. We install customer-supplied locks, correct the door alignment they depend on, and complete the app setup.
Can you make car keys in Signal Hill?
Yes. We cut and program car keys on site anywhere in Signal Hill, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Do you have a locksmith shop in Signal Hill?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Signal Hill and the rest of the Gateway Cities area. All work is done at your location.
Is there a travel charge for Signal Hill?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Signal Hill, so you know the cost in advance.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
