Quick answer
Panic Bar Installation: Installing panic bars, push bars and crash bars for emergency exits. Big Daddy Car Key Replacement provides panic bar installation service in Studio City as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Panic Bar Installation
- Area
- Studio City, Los Angeles County, CA (91604, 91602)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Commercial Locksmith Services
- Phone
- (562) 550-7206
On this page
- About our panic bar installation service
- Customers we serve in Studio City
- Signs you need panic bar installation service
- Panic Bar Installation across Studio City
- What happens when you call
- Common situations in Studio City
- Equipment and hardware on the van
- Trade terms explained
- Cost factors for panic bar installation service
- Why Studio City customers choose Big Daddy
- Advice worth knowing
- Doing it yourself versus calling a professional
- What we commit to
- How to choose a locksmith you can trust
- Before you call (562) 550-7206
- After the visit
- Related locksmith services in Studio City
- Panic Bar Installation near Studio City
- Panic Bar Installation in Studio City: frequently asked questions
About our panic bar installation service
Installing panic bars, push bars and crash bars for emergency exits. A panic bar lets anyone open an exit door by pushing a horizontal bar, with no key or special knowledge, which is what building and fire codes require on many exits. We install rim, mortise and vertical-rod devices, match fire-rated doors with fire exit hardware, and add outside trim or an alarm where needed.

Every business in Studio City eventually faces the same questions. Who has keys? Do the exit doors work? Would the back door survive a pry bar? Our panic bar installation service gives practical answers and carries out the work, usually in a single visit and with as little disruption as possible.
Customers we serve in Studio City
Our commercial customers in Studio City include retail shops, restaurants, offices, medical and dental practices, warehouses, schools, places of worship, property management companies and homeowners associations. Some need a one-time rekey after a staffing change, others an ongoing arrangement covering key systems, exit hardware and door maintenance across several sites.
This service is part of our commercial locksmith services in Studio City.
Signs you need panic bar installation service
People in Studio City usually call us for panic bar installation service in situations like these:
- An inspector required panic hardware on an exit
- An exit is secured with a deadbolt or padlock
- You are opening an assembly or retail space
- A back door needs to lock from outside but open freely from inside
Panic Bar Installation across Studio City
Located in Los Angeles County, Studio City is a neighborhood of the City of Los Angeles within our San Fernando Valley service area. Our panic bar installation service reaches all of Studio City, including Colfax Meadows, the Silver Triangle, Footbridge Square, and the Fryman Canyon hills, as well as the streets in between. You do not need to bring anything to a shop. That includes addresses in ZIP codes 91604 and 91602.
Studio City pairs character homes from the 1930s and 1940s with new hillside builds and production offices, so antique mortise locks and the latest keyless entry systems both show up regularly.
Whether you are at home, at work, or stuck near Radford Studio Center, Fryman Canyon Park, Tujunga Village, or the Studio City Farmers Market, tell the dispatcher the nearest landmark and we will find you. Depending on where the closest technician is, the drive into Studio City follows US-101, SR-134, SR-170, Ventura Boulevard, Laurel Canyon Boulevard, and Coldwater Canyon Avenue. You get a realistic arrival estimate when you call.
What happens when you call
Discuss the need and the site
We ask about the type of business, the doors involved and any deadline, such as an inspection, a tenant move-in or a termination. Photos of the doors help us arrive with the right parts.
Verify authority
Work on a commercial property is done for the owner, the tenant of record, or the property manager. We confirm that before any lock is opened or changed.
Survey the openings
Each door is checked for lock type and function, closer, hinges or pivots, exit hardware and fire rating, so the solution fits both the security need and the code.
Agree scope and price
You receive a clear scope: which doors, what hardware, how many keys, and the cost. For key systems we draft the hierarchy for your approval first.
Carry out the work around your schedule
Rekeys, repairs and installations are done before opening, after closing or during quiet hours when that suits the business better.
Test, document and hand over
Every door is tested for locking, latching and free exit. Keys are stamped and counted, and for master systems you receive a record of what opens what.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Common situations in Studio City
- You are taking over a suite and need the previous tenant’s keys cut off before move-in.
- A closer has failed and the front door slams hard enough to rattle the glass.
- A fire inspection notes that the rear exit has a slide bolt and no panic hardware.
- The storefront door will not latch and the shop cannot be left for the night.
- A manager is let go and returns only some of the keys issued.
- Staff need access to the sales floor but not the office, stockroom or IT closet.
- The back door shows pry marks around the latch after the weekend.
Equipment and hardware on the van
Commercial doors use purpose-built hardware. Aluminum storefronts typically carry Adams Rite-style deadlatches and hook bolts driven by a mortise cylinder. Hollow metal and wood doors use Grade 1 cylindrical levers or mortise locks from makers such as Schlage, Sargent, Corbin Russwin and Yale. Exits use panic and fire exit devices, and closers from LCN, Norton and similar makers control the swing. Interchangeable cores allow fast rekeying. We stock the common cylinders, cams, tailpieces, lock bodies and closers.
Trade terms explained
- Lock function
- How a lock behaves, such as entry, storeroom, classroom or passage, which determines when it is locked and who can lock it.
- Master key system
- A planned arrangement in which each lock has its own key and a master key opens all of them.
- Cylindrical lock
- A lock installed through a round bore in the door, with the mechanism in the lever or knob assembly.
- Door closer
- A hydraulic device that closes a door at a controlled speed and holds it latched.
- Exit device
- Panic or fire exit hardware that unlatches a door when the horizontal bar is pushed.
- Mortise lock
- A heavy-duty lock housed in a pocket cut into the door edge, combining latch and deadbolt in one case.
- Interchangeable core
- A removable lock core that a control key releases, allowing a door to be rekeyed in seconds.
- Restricted keyway
- A key profile whose blanks are supplied only to authorized locksmiths, preventing unauthorized copies.
Cost factors for panic bar installation service
- Code and fire-rating requirements
- Fire-rated openings need listed hardware, and exits may need panic devices. Compliance can dictate the product.
- After-hours scheduling
- Work outside normal hours avoids disruption and may be priced differently. We quote both where it matters.
- Electrified hardware
- Doors tied to access control, electric strikes or maglocks need wiring and coordination that add time.
- Key system complexity
- A simple rekey to one key is quick. A master or grand master system takes planning, more pinning time and record keeping.
- Restricted or high-security keys
- Patented keyways and high-security cylinders cost more per cylinder and per key, in exchange for real control over duplication.
- Number and type of doors
- Aluminum storefront doors, hollow metal doors and wood office doors use different hardware. Pricing reflects how many openings are involved and what each requires.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
Why Studio City customers choose Big Daddy
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Studio City.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.

Advice worth knowing
- Have storefront pivots and closers serviced before the door starts dragging. It is cheaper than replacing a damaged lock.
- Fit latch guards on out-swinging back doors, where the latch is exposed to prying.
- Use a restricted keyway if staff copying keys is a concern. A "Do Not Duplicate" stamp alone does not prevent copies.
- Never chain, padlock or bolt a required exit door while the building is occupied.
- Rekey whenever a keyholder leaves on poor terms or a key cannot be accounted for.
- Keep a written key log: who holds which key, and the date it was issued and returned.
- Test exit devices and door closers monthly. A door that does not latch is an unlocked door.
- Give each employee access only to the doors their job requires.
Doing it yourself versus calling a professional
Commercial doors are regulated in ways that homes are not. The wrong lock function can trap someone inside a storeroom, a deadbolt on an exit can fail an inspection or cost a life, and unlisted hardware can void a fire door’s rating. A commercial locksmith knows the functions, the grades and the applicable codes, keeps your key system mathematically sound, and documents the work so the next change is straightforward.
What we commit to
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
How to choose a locksmith you can trust
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Get an itemized receipt showing labor, parts and the business details.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
Before you call (562) 550-7206
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
After the visit
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Studio City
Customers who need panic bar installation service often ask about these as well. Each can usually be handled in the same visit to Studio City.
- Warehouse Locksmith Service
Heavy-duty locks, roll-up door locks, padlocks, access control and master key systems.
- Property Management Locksmith
Rekeys, lock changes, lockouts, mailbox locks, tenant turnover services and master key systems.
- Business Lockout
Unlocking offices, storefronts, warehouses, restaurants, retail stores and commercial buildings.
- Automatic Door Closer Adjustment
Adjusting speed, latch, sweep and backcheck settings.
- Commercial Door Hardware
Supplying and installing commercial-grade levers, pulls, hinges, closers, exit devices, strikes and protective plates.
- Rim Cylinder Replacement
Replacing rim cylinders used with panic bars, exit devices and commercial doors.
- Restaurant Locksmith Service
Lockouts, rekeys, panic bars, door closers, storefront locks and access control for restaurants.
- File Cabinet Lock Replacement
Replacing locks on filing cabinets, desks and office storage.
- Mortise Lock Repair
Repairing or replacing worn, jammed or damaged mortise lock systems.
- Commercial Locksmith
Lock, key, door hardware and access control service for offices, stores, restaurants, warehouses and multi-tenant buildings.
- Emergency Locksmith
Urgent lock and key help for homes, businesses and vehicles at any hour.
- Car Key Replacement
Replacing lost, stolen or damaged car keys.
- Smart Lock Installation
Installing smart locks, keypad locks, Wi-Fi locks, Bluetooth locks, app-controlled locks and keyless entry systems.
- Change Locks
Swapping out the locks on your doors for new ones, with new keys, in one visit.
- High Security Locks
Locks engineered to resist picking, bumping, drilling and unauthorized key copying.
Panic Bar Installation near Studio City
We provide the same panic bar installation service in the communities around Studio City. See the main panic bar installation page or the full list of service areas.
- Panic Bar Installation in Valley Village
- Panic Bar Installation in Toluca Lake
- Panic Bar Installation in North Hollywood
- Panic Bar Installation in Sherman Oaks
- Panic Bar Installation in West Hollywood
- Panic Bar Installation in Valley Glen
- Panic Bar Installation in Beverly Hills
- Panic Bar Installation in Van Nuys
- Panic Bar Installation in Burbank
- Panic Bar Installation in Sun Valley
- Panic Bar Installation in Encino
- Panic Bar Installation in Panorama City
Panic Bar Installation in Studio City: frequently asked questions
When is a panic bar required?
Model codes used in California generally require panic hardware on exit doors serving assembly and educational occupancies with 50 or more occupants and certain hazardous areas. Your local fire marshal or building official makes the final determination for your space.
How do we stop employees from copying keys?
Install a restricted key system. Its blanks are available only through the authorized locksmith and copies are cut only for people on your signature list.
Do you offer ongoing service for multiple locations?
Yes. We service multi-site businesses and managed properties across our service area and keep key records so later changes are fast.
Can you work outside our business hours in Studio City?
Yes. We are open 24 hours and regularly schedule rekeys, repairs and installations before opening or after closing so customers and staff are not disturbed.
Can you provide documentation for our records?
Yes. For rekeys and key systems we provide a key schedule listing doors, key numbers and the quantity of keys issued.
How long does it take to rekey a business?
A small shop or office with a handful of doors usually takes about an hour. Larger sites and master key systems are scheduled by scope.
What brands of commercial hardware do you service?
We work with the major commercial lines, including Schlage, Sargent, Corbin Russwin, Yale, Best, Adams Rite, Von Duprin, LCN, Norton and Kaba, and can match most existing hardware.
Are our exit doors compliant?
We can check that exit doors open with one motion and no key, that panic hardware is present where required, and that closers latch the doors. Final authority rests with your fire marshal or building official.
Can you make car keys in Studio City?
Yes. We cut and program car keys on site anywhere in Studio City, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Which parts of Studio City do you serve?
All of Studio City, including Colfax Meadows, the Silver Triangle, Footbridge Square, and the Fryman Canyon hills, and addresses in ZIP codes 91604 and 91602.
Is there a travel charge for Studio City?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Studio City, so you know the cost in advance.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
