Quick answer
Patio Door Lock Repair: Repairing or replacing sliding glass door locks, patio door latches and security bars. Big Daddy Car Key Replacement provides patio door lock repair service in Studio City as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Patio Door Lock Repair
- Area
- Studio City, Los Angeles County, CA (91604, 91602)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Residential Locksmith Services
- Phone
- (562) 550-7206
On this page
- What patio door lock repair means
- Customers we serve in Studio City
- Signs you need patio door lock repair service
- Patio Door Lock Repair across Studio City
- What happens when you call
- Typical calls we receive
- Tools, parts and hardware we carry
- Trade terms explained
- What affects the cost of patio door lock repair service
- What you can expect from us
- Tips to avoid problems
- Why this is a job for a locksmith
- How we work on every job
- Questions to ask any locksmith
- Before you call (562) 550-7206
- After the visit
- Related locksmith services in Studio City
- Patio Door Lock Repair near Studio City
- Patio Door Lock Repair in Studio City: frequently asked questions
What patio door lock repair means
Repairing or replacing sliding glass door locks, patio door latches and security bars. Patio doors are a favorite entry point because their factory latches are small and often worn. We repair or replace the mortise latch and handle set, adjust the keeper so the hook engages fully, and add a secondary lock such as a foot bolt, loop lock or security bar for real resistance.

Your locks are only as good as their condition and the keys in circulation. Our patio door lock repair service in Studio City deals with both: hardware that works smoothly and keys that only the right people hold. A mobile technician comes to your home, looks at each door, explains the options in plain terms and completes most work in one visit.
Customers we serve in Studio City
We work for homeowners, tenants, landlords, property managers, real estate agents and short-term rental hosts in Studio City. New buyers want every lock rekeyed before moving in, landlords need quick turnovers between tenants, families want one key for the whole house, and older residents often ask for hardware that is easier to operate. Each has slightly different priorities, and we tailor the recommendation accordingly.
This service is part of our residential locksmith services in Studio City.
Signs you need patio door lock repair service
These are the most common reasons customers in Studio City ask for patio door lock repair service:
- The patio latch does not catch
- The handle is cracked or loose
- The door can be lifted or jiggled open
- You rely on a stick in the track for security
Patio Door Lock Repair across Studio City
Located in Los Angeles County, Studio City is a neighborhood of the City of Los Angeles within our San Fernando Valley service area. We cover every part of Studio City, including Colfax Meadows, the Silver Triangle, Footbridge Square, and the Fryman Canyon hills. Wherever you are in town, the technician comes to your door, driveway or parking space. Service is available throughout ZIP codes 91604 and 91602.
Studio City pairs character homes from the 1930s and 1940s with new hillside builds and production offices, so antique mortise locks and the latest keyless entry systems both show up regularly.
Whether you are at home, at work, or stuck near Radford Studio Center, Fryman Canyon Park, Tujunga Village, or the Studio City Farmers Market, tell the dispatcher the nearest landmark and we will find you. Depending on where the closest technician is, the drive into Studio City follows US-101, SR-134, SR-170, Ventura Boulevard, Laurel Canyon Boulevard, and Coldwater Canyon Avenue. You get a realistic arrival estimate when you call.
What happens when you call
A short phone consultation
Tell us what is happening and how many doors are involved. From that we can usually give a price range and suggest whether rekeying, repair or replacement fits best.
On-site inspection
The technician looks at each lock, the door, the frame and the strike plate. Problems blamed on a lock are often caused by a sagging door or a loose strike, and it pays to find that first.
Clear options and a firm price
You hear what can be repaired, what should be replaced and what is optional, with a price for each, before any work begins.
The work is done at your door
Cylinders are rekeyed, locks installed or repaired, strikes reinforced and keys cut in the van outside. Most homes are finished in under two hours.
Every lock is tested with you
You try each key in each lock with the door open and closed. Bolts should extend fully and turn with two fingers.
Keys and advice are handed over
You receive the new keys, and we note anything worth watching, such as a worn hinge or a door that will need adjusting when the weather changes.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Typical calls we receive
- An older parent is having trouble with a round knob and needs lever handles.
- You have just closed on a house and have no idea how many keys the previous owners handed out.
- The front door deadbolt has become stiff and now needs a shoulder against the door to lock.
- Each door in the house takes a different key and the ring keeps growing.
- A back door has only a locking knob, which can be slipped or forced in seconds.
- A roommate, partner or tenant has moved out and still has a key.
- A handbag with house keys and a driver’s license was stolen from a car.
Tools, parts and hardware we carry
Residential security in Southern California runs largely on two keyways, Kwikset KW1 and Schlage SC1, plus premium lines such as Baldwin, Emtek and Yale. Our vans carry rekeying pins for all of them, single- and double-cylinder deadbolts in common finishes, keyed entry knobs and levers, privacy and passage sets, latches, reinforced strike plates, door wrap plates and hinge screws. For higher security we install cylinders with hardened inserts and restricted keys.
Trade terms explained
- Rekeying
- Replacing the pins in a lock cylinder so a new key works and previous keys do not, without changing the hardware.
- Deadbolt
- A lock whose solid bolt is moved only by a key or thumbturn, so it cannot be pushed back like a spring latch.
- Strike plate
- The metal plate on the door frame that the latch or bolt enters when the door is closed.
- Backset
- The distance from the door edge to the center of the lock hole, normally 2⅜ or 2¾ inches.
- Keyway
- The shape of the slot a key slides into. Kwikset KW1 and Schlage SC1 are the most common in local homes.
- ANSI/BHMA grade
- A performance rating for locks: Grade 1 is the strongest and most durable, Grade 2 is solid residential quality, Grade 3 is basic.
- Keyed alike
- Several locks set to operate with the same key.
- Single and double cylinder
- A single-cylinder deadbolt has a key outside and a thumbturn inside; a double-cylinder model needs a key on both sides.
What affects the cost of patio door lock repair service
- Door preparation
- Fitting a lock to existing holes is quick. Boring a new door, enlarging old holes or repairing a damaged edge takes additional time.
- Grade and brand of hardware
- A Grade 1 deadbolt costs more than Grade 3, and high-security or designer hardware more again. The front and back doors are where better hardware pays off.
- Number of locks
- Rekeying and installation are priced per lock, with the service call covering the visit. Doing every door in one visit costs less per lock than separate trips.
- Smart or electronic features
- Keypad and smart locks cost more than mechanical ones and take longer to set up, especially when the door needs aligning so the motor can throw the bolt.
- Scheduling
- Planned daytime appointments are typically priced lower than urgent late-night calls.
- Condition of door and frame
- A split jamb, stripped hinge screws or a swollen door has to be corrected for a lock to work properly, and that adds labor.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
What you can expect from us
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Studio City.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.

Tips to avoid problems
- Fit a deadbolt with a one-inch throw on every exterior door, including the door from the garage into the house.
- Add a secondary lock to sliding glass doors, and anti-lift blocks in the upper track.
- Use a dry graphite or PTFE lubricant in cylinders once a year. Avoid oil sprays, which collect grit.
- Keep a record of who holds keys. When that list becomes uncertain, it is time to rekey.
- When buying new hardware, check that the ANSI/BHMA grade is printed on the package.
- If a key begins to stick, have it looked at. Sticking is the usual warning before a lock fails completely.
- Have all compatible locks keyed alike. One key is easier to carry and easier to keep track of.
- Replace the short screws in strike plates and top hinges with three-inch screws that reach the wall framing.
Why this is a job for a locksmith
Installing or rekeying a lock looks simple in a video, and sometimes it is. The problems appear at the edges: a bolt that does not fully extend and therefore is not deadlocked, a strike held by half-inch screws, pins dropped during a rekey, a latch installed upside down. A locksmith does this work daily, carries the parts to correct what turns up, and leaves you with a door that has been tested under real conditions.
How we work on every job
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
Questions to ask any locksmith
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Get an itemized receipt showing labor, parts and the business details.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
Before you call (562) 550-7206
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
After the visit
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Studio City
Customers who need patio door lock repair service often ask about these as well. Each can usually be handled in the same visit to Studio City.
- Garage Door Lock Repair
Repairing or replacing manual garage locks, side door locks and garage entry door hardware.
- House Lockout
Unlocking front doors, back doors, side doors, garage entry doors and interior doors, without damaging the lock whenever possible.
- Condo Locksmith Service
Lock services for condo units, shared entries, storage rooms and garage access doors.
- Lock Replacement
Replacing old, damaged, outdated or unsecured locks with new locks.
- Apartment Locksmith Service
Lockouts, rekeys, lock changes and key copies for apartments and rental units.
- Residential Locksmith
Complete lock and key service for houses, apartments, condos and rental properties.
- Change Locks
Swapping out the locks on your doors for new ones, with new keys, in one visit.
- High-Security Lock Installation
Installing high-security locks designed to resist picking, drilling, bumping and unauthorized key duplication.
- Sliding Door Lock Repair
Fixing sliding door lock mechanisms, handles, rollers, latches and alignment issues.
- Apartment Lockout
Unlocking apartment unit doors for tenants who are locked out, day or night.
- Locksmith Near Me
A local mobile locksmith dispatched to your location across Los Angeles, Ventura and Orange County.
- Key Duplication
Making spare keys for house doors, gates, mailboxes, padlocks, cabinets and more.
- High Security Locks
Locks engineered to resist picking, bumping, drilling and unauthorized key copying.
- Access Control Installation
Installing electronic access systems for offices, warehouses, apartment buildings and commercial facilities.
- Gate Lock Repair
Fixing stuck, broken, rusted or misaligned gate locks and latches.
Patio Door Lock Repair near Studio City
We provide the same patio door lock repair service in the communities around Studio City. See the main patio door lock repair page or the full list of service areas.
- Patio Door Lock Repair in Valley Village
- Patio Door Lock Repair in Toluca Lake
- Patio Door Lock Repair in North Hollywood
- Patio Door Lock Repair in Sherman Oaks
- Patio Door Lock Repair in West Hollywood
- Patio Door Lock Repair in Valley Glen
- Patio Door Lock Repair in Beverly Hills
- Patio Door Lock Repair in Van Nuys
- Patio Door Lock Repair in Burbank
- Patio Door Lock Repair in Sun Valley
- Patio Door Lock Repair in Encino
- Patio Door Lock Repair in Panorama City
Patio Door Lock Repair in Studio City: frequently asked questions
How can I make my patio door more secure?
Start with a working latch that fully engages its keeper, then add a secondary lock such as a foot-operated bolt or a keyed loop lock. Anti-lift blocks in the upper track stop the panel from being lifted out.
What is the most secure type of front door lock?
A Grade 1 deadbolt with a hardened one-inch bolt, installed with a reinforced strike plate screwed into the wall stud. A high-security cylinder adds pick, bump and key-copy protection.
Do you need to see proof that I live here?
For lockouts and lock changes, yes. A photo ID with the address, a lease, a utility bill or closing documents are all acceptable.
Do you provide service for landlords and tenants?
Yes. We rekey between tenants, handle tenant lockouts with proper verification, and replace mailbox locks. Tenants should check their lease before changing locks.
Should I rekey or replace the locks in my Studio City home?
Rekey when the locks are in good condition and you simply need old keys to stop working. Replace when locks are worn, damaged, low grade, or you want new features. We look at each lock and tell you which makes sense.
Can all my doors use the same key?
Yes, if the locks share a keyway or can be fitted with cylinders that do. Mixed brands can often be brought onto one key by swapping a cylinder or two.
Can you install locks I bought myself?
Yes. We install customer-supplied locks and check that they suit the door. If a lock is defective or the wrong size, we will tell you before fitting it.
What lock brands do you work with?
We service and install the common residential brands found in Southern California homes, including Schlage, Kwikset, Baldwin, Yale, Emtek and Weiser, along with high-security lines.
Which parts of Studio City do you serve?
All of Studio City, including Colfax Meadows, the Silver Triangle, Footbridge Square, and the Fryman Canyon hills, and addresses in ZIP codes 91604 and 91602.
Do you have a locksmith shop in Studio City?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Studio City and the rest of the San Fernando Valley area. All work is done at your location.
How long does it take a locksmith to reach me in Studio City?
It depends on where the nearest technician is and on traffic along US-101, SR-134, or SR-170. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
Which areas do you cover?
We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
