Quick answer
The 2000 Nissan Frontier typically uses a traditional edge-cut metal key with no transponder chip. Big Daddy Car Key Replacement makes 2000 Nissan Frontier keys on site in Sylmar, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 2000 Nissan Frontier
- Typical key
- Traditional metal key
- Transponder chip
- No
- Blade
- Edge-cut
- Programming
- Not normally required
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 2000 Nissan Frontier use?
- How we make a 2000 Nissan Frontier key
- How Nissan key and immobilizer systems work
- Common Nissan key and lock problems
- All keys lost or just need a spare?
- Stranded with your Nissan right now?
- 2000 Nissan Frontier key replacement across Sylmar
- Getting a 2000 Nissan Frontier key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Nissan key?
- What affects the cost of a 2000 Nissan Frontier key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers in Sylmar choose Big Daddy
- Looking after your Nissan key
- Choosing a car locksmith you can trust
- Other Nissan Frontier years
- Other Nissan models
- Related automotive locksmith services in Sylmar
- 2000 Nissan Frontier keys near Sylmar
- 2000 Nissan Frontier key replacement in Sylmar: frequently asked questions
What kind of key does a 2000 Nissan Frontier use?
The 2000 Nissan Frontier typically uses a traditional edge-cut metal key with no transponder chip.
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

How we make a 2000 Nissan Frontier key
For the 2000 Nissan Frontier we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.
This page covers the 2000 model year. For other years, see the Nissan Frontier key replacement overview, or browse all Nissan models.
How Nissan key and immobilizer systems work
Nissan and Infiniti use NATS, the Nissan Anti-Theft System, with a transponder registered in the immobilizer or body control module. The Intelligent Key added proximity entry and, from the late 2000s, push-button start. Programming requires a PIN that is calculated from a code read out of the body control module, and newer models use rolling 20-digit codes that need current equipment.
Nissan’s NATS immobilizer spread across the lineup around 2000, and the Intelligent Key followed in the mid-2000s. Every Altima since 2007 has push-button start, making it one of the most common smart-key cars on the road.
Common Nissan key and lock problems
These are the issues we see most often on Nissan vehicles in Sylmar:
- Steering lock (ESCL) failures on some push-button models that prevent starting
- Intelligent Keys that are not detected when the fob battery is weak
- Twist-knob ignitions that will not turn without a recognized key
- Body control module problems that erase programmed keys
All keys lost or just need a spare?
How many keys you still have matters more than almost anything else. With one working key present, a second key can usually be copied or added in a short visit. With no keys at all, the technician must first work out the correct cuts, from the VIN or by decoding a lock, and then gain security access to the immobilizer so a new key can be registered. That all-keys-lost process is routine for us and is done on site, but it takes more time. If you are down to your last key, adding a spare today is far cheaper than replacing every key later.
Stranded with your Nissan right now?
Stuck without a working key? First make sure you are somewhere safe and visible. Think about whether a spare exists at home or with a family member. Then call (562) 550-7206 and give us the year, make, model, your location and whether the vehicle is locked or open. We will tell you the likely cost and how long a technician will take to reach you. For a child or pet locked inside, call 911 before anything else.
2000 Nissan Frontier key replacement across Sylmar
Sylmar is a neighborhood of the City of Los Angeles in Los Angeles County, part of the San Fernando Valley area we cover every day. We cover every part of Sylmar, including the Foothill Boulevard corridor, the Olive View area, the equestrian lots near El Cariso, and the Hubbard Street corridor. Wherever you are in town, the technician comes to your door, driveway or parking space. We serve the 91342 ZIP code.
Sylmar is the northernmost neighborhood in Los Angeles, with large lots, manufactured-home communities and newer tract developments, plus several freeway interchanges where stranded drivers call for lockouts and lost keys.
Whether you are at home, at work, or stuck near Olive View–UCLA Medical Center, Los Angeles Mission College, El Cariso Community Regional Park, or the Nethercutt Museum, tell the dispatcher the nearest landmark and we will find you. Technicians usually reach Sylmar by I-5, I-210, SR-118, I-405, Foothill Boulevard, and Glenoaks Boulevard. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
Getting a 2000 Nissan Frontier key made, step by step
Call with the year, make and model
Tell us you need a key for a 2000 Nissan Frontier, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Nissan key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 2000 Nissan Frontier key
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
Whoever finds a lost key might find the car. During programming we can usually remove lost keys from the vehicle’s memory, which stops them starting the engine. That does not change the mechanical door lock, so if theft is a concern, the door cylinders can be rekeyed to a new cut as well.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- All keys lost
- A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
Situations we are called to most often
- The only key to the car is lost somewhere between the beach, the restaurant and home.
- The dash reads "key not detected" and the start button does nothing.
- The key fob went through the washing machine.
- A hardware-store copy opens the door but the engine will not start.
- The ignition will not turn and the key will not come out.
Why drivers in Sylmar choose Big Daddy
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.

Looking after your Nissan key
Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.
- Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
- If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
- Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
- Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
Choosing a car locksmith you can trust
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
Other Nissan Frontier years
- 2026 Frontier
- 2025 Frontier
- 2024 Frontier
- 2023 Frontier
- 2022 Frontier
- 2021 Frontier
- 2020 Frontier
- 2019 Frontier
- 2018 Frontier
- 2017 Frontier
- 2016 Frontier
- 2015 Frontier
- 2014 Frontier
- 2013 Frontier
- 2012 Frontier
- 2011 Frontier
- 2010 Frontier
- 2009 Frontier
- 2008 Frontier
- 2007 Frontier
- 2006 Frontier
- 2005 Frontier
- 2004 Frontier
- 2003 Frontier
- 2002 Frontier
- 2001 Frontier
- 1999 Frontier
- 1998 Frontier
Other Nissan models
- Nissan Pathfinder keys
- Nissan Sentra keys
- Nissan Altima keys
- Nissan Maxima keys
- Nissan Quest keys
- Nissan Murano keys
- Nissan Armada keys
- Nissan Titan keys
- Nissan Versa keys
- Nissan Rogue keys
- Nissan GT-R keys
- Nissan Leaf keys
- Nissan Xterra keys
Related automotive locksmith services in Sylmar
- Boat Key Replacement
Replacing keys for boat ignitions, compartments and storage locks.
- Broken Car Key Extraction
Removing broken keys from ignitions, door locks, trunks and glove boxes.
- RV Key Replacement
Replacing keys for RV doors, compartments, storage locks and ignitions.
- Semi-Truck Locksmith
Lockouts, key replacement, ignition repair and fleet key services for commercial trucks.
- Car Locksmith
On-site car key, lockout and ignition help wherever the vehicle is parked.
- Lost Car Key Replacement
Making a new car key when all keys are lost.
- Push-to-Start Key Programming
Programming proximity keys for push-button ignition vehicles.
- Transponder Key Programming
Programming chip keys for vehicles with immobilizer systems.
2000 Nissan Frontier keys near Sylmar
We make 2000 Nissan Frontier keys in the communities around Sylmar as well. See the main 2000 Nissan Frontier key replacement page or the Sylmar locksmith page.
- 2000 Nissan Frontier keys in San Fernando
- 2000 Nissan Frontier keys in Pacoima
- 2000 Nissan Frontier keys in Granada Hills
- 2000 Nissan Frontier keys in Mission Hills
- 2000 Nissan Frontier keys in Arleta
- 2000 Nissan Frontier keys in Lake View Terrace
- 2000 Nissan Frontier keys in North Hills
- 2000 Nissan Frontier keys in Panorama City
- 2000 Nissan Frontier keys in Porter Ranch
- 2000 Nissan Frontier keys in Northridge
- 2000 Nissan Frontier keys in Sun Valley
- 2000 Nissan Frontier keys in Santa Clarita
2000 Nissan Frontier key replacement in Sylmar: frequently asked questions
Does a 2000 Nissan Frontier key need programming?
A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.
Can any hardware store copy my 2000 Nissan Frontier key?
If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.
My Nissan key turns in the door but not the ignition. Why?
The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.
My Nissan says "No Key Detected". What should I do?
Replace the fob battery, then hold the fob against the start button while pressing it. If the car still does not respond, the fob, the antenna or the steering lock may be at fault, and we can test each.
Do all keys have to be present when programming a Nissan?
Yes on most models. Programming re-registers every key, and any key not present is erased from the system.
How much does a 2000 Nissan Frontier key cost?
It depends on the key type for your exact trim and on whether you still have a working key. Call (562) 550-7206 with the year, make and model and we will give you a price range before sending anyone.
Is a locksmith-made Nissan key as good as a dealer key?
Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.
Will my lost 2000 Nissan Frontier key still start the car?
For chip and smart keys we can usually erase lost keys from the car’s memory during programming, so they no longer start the engine. A lost key could still open the door mechanically unless the locks are rekeyed.
Can you unlock my 2000 Nissan Frontier if the keys are inside?
Yes. We open vehicles without damage using air wedges and reach tools or by picking the door lock, at any hour.
Does car insurance cover a replacement Nissan key?
Some comprehensive policies, roadside plans and dealer key-protection plans do. Check your policy; we provide an itemized receipt you can submit.
How long does it take a locksmith to reach me in Sylmar?
It depends on where the nearest technician is and on traffic along I-5, I-210, or SR-118. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Can you make car keys in Sylmar?
Yes. We cut and program car keys on site anywhere in Sylmar, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
