Quick answer
Commercial Door Hardware: Supplying and installing commercial-grade levers, pulls, hinges, closers, exit devices, strikes and protective plates. Big Daddy Car Key Replacement provides commercial door hardware service in Sylmar as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Commercial Door Hardware
- Area
- Sylmar, Los Angeles County, CA (91342)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Commercial Locksmith Services
- Phone
- (562) 550-7206
On this page
- What commercial door hardware involves
- Customers we serve in Sylmar
- Signs you need commercial door hardware service
- Commercial Door Hardware across Sylmar
- How our commercial door hardware service works
- Typical calls we receive
- What our technicians bring
- A short glossary
- What affects the cost of commercial door hardware service
- Why Sylmar customers choose Big Daddy
- Practical advice from our locksmiths
- Professional service compared with doing it yourself
- How we work on every job
- Choosing a locksmith: a short checklist
- Before you call (562) 550-7206
- Aftercare and records
- Related locksmith services in Sylmar
- Commercial Door Hardware near Sylmar
- Commercial Door Hardware in Sylmar: frequently asked questions
What commercial door hardware involves
Supplying and installing commercial-grade levers, pulls, hinges, closers, exit devices, strikes and protective plates. Commercial door hardware is specified by opening: the right hinge type and count, a closer, a lock or exit device with the correct function, and protection such as kick plates and latch guards. We supply and install complete hardware sets for tenant improvements and replace individual components that have worn out.

Every business in Sylmar eventually faces the same questions. Who has keys? Do the exit doors work? Would the back door survive a pry bar? Our commercial door hardware service gives practical answers and carries out the work, usually in a single visit and with as little disruption as possible.
Customers we serve in Sylmar
Our commercial customers in Sylmar include retail shops, restaurants, offices, medical and dental practices, warehouses, schools, places of worship, property management companies and homeowners associations. Some need a one-time rekey after a staffing change, others an ongoing arrangement covering key systems, exit hardware and door maintenance across several sites.
This service is part of our commercial locksmith services in Sylmar.
Signs you need commercial door hardware service
If any of the following sounds familiar, commercial door hardware service is likely what you need:
- A build-out needs complete hardware sets
- Hardware finishes or functions do not match
- Doors lack kick plates or latch protection
- Hinges are worn and doors are sagging
Commercial Door Hardware across Sylmar
Located in Los Angeles County, Sylmar is a neighborhood of the City of Los Angeles within our San Fernando Valley service area. We cover every part of Sylmar, including the Foothill Boulevard corridor, the Olive View area, the equestrian lots near El Cariso, and the Hubbard Street corridor. Wherever you are in town, the technician comes to your door, driveway or parking space. We serve the 91342 ZIP code.
Sylmar is the northernmost neighborhood in Los Angeles, with large lots, manufactured-home communities and newer tract developments, plus several freeway interchanges where stranded drivers call for lockouts and lost keys.
Whether you are at home, at work, or stuck near Olive View–UCLA Medical Center, Los Angeles Mission College, El Cariso Community Regional Park, or the Nethercutt Museum, tell the dispatcher the nearest landmark and we will find you. Technicians usually reach Sylmar by I-5, I-210, SR-118, I-405, Foothill Boulevard, and Glenoaks Boulevard. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
How our commercial door hardware service works
Discuss the need and the site
We ask about the type of business, the doors involved and any deadline, such as an inspection, a tenant move-in or a termination. Photos of the doors help us arrive with the right parts.
Verify authority
Work on a commercial property is done for the owner, the tenant of record, or the property manager. We confirm that before any lock is opened or changed.
Survey the openings
Each door is checked for lock type and function, closer, hinges or pivots, exit hardware and fire rating, so the solution fits both the security need and the code.
Agree scope and price
You receive a clear scope: which doors, what hardware, how many keys, and the cost. For key systems we draft the hierarchy for your approval first.
Carry out the work around your schedule
Rekeys, repairs and installations are done before opening, after closing or during quiet hours when that suits the business better.
Test, document and hand over
Every door is tested for locking, latching and free exit. Keys are stamped and counted, and for master systems you receive a record of what opens what.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Typical calls we receive
- The back door shows pry marks around the latch after the weekend.
- You are taking over a suite and need the previous tenant’s keys cut off before move-in.
- The storefront door will not latch and the shop cannot be left for the night.
- A closer has failed and the front door slams hard enough to rattle the glass.
- A fire inspection notes that the rear exit has a slide bolt and no panic hardware.
- A manager is let go and returns only some of the keys issued.
- Staff need access to the sales floor but not the office, stockroom or IT closet.
What our technicians bring
Commercial doors use purpose-built hardware. Aluminum storefronts typically carry Adams Rite-style deadlatches and hook bolts driven by a mortise cylinder. Hollow metal and wood doors use Grade 1 cylindrical levers or mortise locks from makers such as Schlage, Sargent, Corbin Russwin and Yale. Exits use panic and fire exit devices, and closers from LCN, Norton and similar makers control the swing. Interchangeable cores allow fast rekeying. We stock the common cylinders, cams, tailpieces, lock bodies and closers.
A short glossary
- Mortise lock
- A heavy-duty lock housed in a pocket cut into the door edge, combining latch and deadbolt in one case.
- Master key system
- A planned arrangement in which each lock has its own key and a master key opens all of them.
- Door closer
- A hydraulic device that closes a door at a controlled speed and holds it latched.
- Exit device
- Panic or fire exit hardware that unlatches a door when the horizontal bar is pushed.
- Interchangeable core
- A removable lock core that a control key releases, allowing a door to be rekeyed in seconds.
- Lock function
- How a lock behaves, such as entry, storeroom, classroom or passage, which determines when it is locked and who can lock it.
- Cylindrical lock
- A lock installed through a round bore in the door, with the mechanism in the lever or knob assembly.
- Restricted keyway
- A key profile whose blanks are supplied only to authorized locksmiths, preventing unauthorized copies.
What affects the cost of commercial door hardware service
- Number and type of doors
- Aluminum storefront doors, hollow metal doors and wood office doors use different hardware. Pricing reflects how many openings are involved and what each requires.
- Code and fire-rating requirements
- Fire-rated openings need listed hardware, and exits may need panic devices. Compliance can dictate the product.
- After-hours scheduling
- Work outside normal hours avoids disruption and may be priced differently. We quote both where it matters.
- Restricted or high-security keys
- Patented keyways and high-security cylinders cost more per cylinder and per key, in exchange for real control over duplication.
- Key system complexity
- A simple rekey to one key is quick. A master or grand master system takes planning, more pinning time and record keeping.
- Hardware grade and function
- Grade 1 mortise locks and exit devices cost more than cylindrical levers, and they last far longer on busy doors.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
Why Sylmar customers choose Big Daddy
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Sylmar.

Practical advice from our locksmiths
- Use a restricted keyway if staff copying keys is a concern. A "Do Not Duplicate" stamp alone does not prevent copies.
- Rekey whenever a keyholder leaves on poor terms or a key cannot be accounted for.
- Test exit devices and door closers monthly. A door that does not latch is an unlocked door.
- Have storefront pivots and closers serviced before the door starts dragging. It is cheaper than replacing a damaged lock.
- Fit latch guards on out-swinging back doors, where the latch is exposed to prying.
- Never chain, padlock or bolt a required exit door while the building is occupied.
- Store spare keys in a locked key cabinet, not a desk drawer.
- Give each employee access only to the doors their job requires.
Professional service compared with doing it yourself
Commercial doors are regulated in ways that homes are not. The wrong lock function can trap someone inside a storeroom, a deadbolt on an exit can fail an inspection or cost a life, and unlisted hardware can void a fire door’s rating. A commercial locksmith knows the functions, the grades and the applicable codes, keeps your key system mathematically sound, and documents the work so the next change is straightforward.
How we work on every job
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
Choosing a locksmith: a short checklist
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Get an itemized receipt showing labor, parts and the business details.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
Before you call (562) 550-7206
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Aftercare and records
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Sylmar
Customers who need commercial door hardware service often ask about these as well. Each can usually be handled in the same visit to Sylmar.
- Commercial Lock Change
Replacing commercial-grade locks on offices, entry doors, back doors, storage rooms and restricted areas.
- Mortise Lock Repair
Repairing or replacing worn, jammed or damaged mortise lock systems.
- Restricted Key Systems
Installing key systems that prevent unauthorized key duplication.
- Door Closer Repair
Adjusting or repairing doors that slam, close too slowly, do not latch or stay open.
- Exit Device Repair
Fixing commercial exit devices, dogging mechanisms, latches, rods and trim.
- Warehouse Locksmith Service
Heavy-duty locks, roll-up door locks, padlocks, access control and master key systems.
- Commercial Lock Installation
Installing heavy-duty locks for business properties.
- Automatic Door Closer Adjustment
Adjusting speed, latch, sweep and backcheck settings.
- Retail Store Locksmith Service
Lock repair, rekeying, high-security locks and emergency unlocking for retail stores.
- Business Lockout
Unlocking offices, storefronts, warehouses, restaurants, retail stores and commercial buildings.
- Automotive Locksmith
Mobile key, lock and ignition service for cars, trucks, SUVs, vans, motorcycles and fleets.
- Transponder Key Programming
Programming chip keys for vehicles with immobilizer systems.
- Safe Locksmith
Opening, repairing, servicing and changing combinations on home and business safes.
- Rekey Locks
Resetting your existing locks to a new key so previous keys stop working, without replacing the hardware.
- Emergency Locksmith
Urgent lock and key help for homes, businesses and vehicles at any hour.
Commercial Door Hardware near Sylmar
We provide the same commercial door hardware service in the communities around Sylmar. See the main commercial door hardware page or the full list of service areas.
- Commercial Door Hardware in San Fernando
- Commercial Door Hardware in Pacoima
- Commercial Door Hardware in Granada Hills
- Commercial Door Hardware in Mission Hills
- Commercial Door Hardware in Arleta
- Commercial Door Hardware in Lake View Terrace
- Commercial Door Hardware in North Hills
- Commercial Door Hardware in Panorama City
- Commercial Door Hardware in Porter Ranch
- Commercial Door Hardware in Northridge
- Commercial Door Hardware in Sun Valley
- Commercial Door Hardware in Santa Clarita
Commercial Door Hardware in Sylmar: frequently asked questions
What hardware does a commercial door need?
Typically hinges or pivots rated for the door’s weight, a closer, a Grade 1 lock or exit device with the right function, a strike, and weatherstripping and threshold on exterior doors. Fire-rated doors need labeled hardware throughout.
How long does it take to rekey a business?
A small shop or office with a handful of doors usually takes about an hour. Larger sites and master key systems are scheduled by scope.
Who is allowed to authorize lock changes for a business?
The owner, the tenant named on the lease, or the property manager. We verify authority before changing or opening any commercial lock.
Can you provide documentation for our records?
Yes. For rekeys and key systems we provide a key schedule listing doors, key numbers and the quantity of keys issued.
What brands of commercial hardware do you service?
We work with the major commercial lines, including Schlage, Sargent, Corbin Russwin, Yale, Best, Adams Rite, Von Duprin, LCN, Norton and Kaba, and can match most existing hardware.
Do you offer ongoing service for multiple locations?
Yes. We service multi-site businesses and managed properties across our service area and keep key records so later changes are fast.
Are our exit doors compliant?
We can check that exit doors open with one motion and no key, that panic hardware is present where required, and that closers latch the doors. Final authority rests with your fire marshal or building official.
How do we stop employees from copying keys?
Install a restricted key system. Its blanks are available only through the authorized locksmith and copies are cut only for people on your signature list.
Do you have a locksmith shop in Sylmar?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Sylmar and the rest of the San Fernando Valley area. All work is done at your location.
Which parts of Sylmar do you serve?
All of Sylmar, including the Foothill Boulevard corridor, the Olive View area, the equestrian lots near El Cariso, and the Hubbard Street corridor, and addresses in ZIP code 91342.
Is there a travel charge for Sylmar?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Sylmar, so you know the cost in advance.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
Which areas do you cover?
We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
