Quick answer
Keyless Entry Installation: Installing keyless entry systems for doors and gates. Big Daddy Car Key Replacement provides keyless entry installation service in Sylmar as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Keyless Entry Installation
- Area
- Sylmar, Los Angeles County, CA (91342)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Access Control & Electronic Lock Services
- Phone
- (562) 550-7206
On this page
- What keyless entry installation involves
- Who we help in Sylmar
- Reasons to call for keyless entry installation service
- Keyless Entry Installation across Sylmar
- Our keyless entry installation process, step by step
- Common situations in Sylmar
- Tools, parts and hardware we carry
- Trade terms explained
- How keyless entry installation service is priced
- Why call Big Daddy Car Key Replacement
- Practical advice from our locksmiths
- Doing it yourself versus calling a professional
- Our service standards
- Choosing a locksmith: a short checklist
- How to prepare for the visit
- Aftercare and records
- Related locksmith services in Sylmar
- Keyless Entry Installation near Sylmar
- Keyless Entry Installation in Sylmar: frequently asked questions
What keyless entry installation involves
Installing keyless entry systems for doors and gates. Keyless entry for buildings means a door or gate that opens with a code, credential or phone. On gates we install weatherproof keypads and electric gate locks or tie into the gate operator; on doors, keypad levers, deadbolts or wired readers with electric strikes.

Electronic locks replace the question "who has a key?" with a list you control. Our keyless entry installation service in Sylmar covers the whole range, from a single keypad deadbolt on a front door to networked readers on a commercial building, installed correctly and set up so you can manage it yourself.
Who we help in Sylmar
Electronic lock and access control customers in Sylmar range from households that want to stop hiding keys, to short-term rental hosts issuing guest codes, to offices, clinics, gyms, apartment buildings and warehouses that need to control and record who enters.
This service is part of our access control & electronic lock services in Sylmar.
Reasons to call for keyless entry installation service
If any of the following sounds familiar, keyless entry installation service is likely what you need:
- A pedestrian or driveway gate needs code entry
- You never want to be locked out again
- Deliveries or services need timed access
- You want to remove hidden spare keys
Keyless Entry Installation across Sylmar
Located in Los Angeles County, Sylmar is a neighborhood of the City of Los Angeles within our San Fernando Valley service area. We cover every part of Sylmar, including the Foothill Boulevard corridor, the Olive View area, the equestrian lots near El Cariso, and the Hubbard Street corridor. Wherever you are in town, the technician comes to your door, driveway or parking space. That includes addresses in ZIP code 91342.
Sylmar is the northernmost neighborhood in Los Angeles, with large lots, manufactured-home communities and newer tract developments, plus several freeway interchanges where stranded drivers call for lockouts and lost keys.
Whether you are at home, at work, or stuck near Olive View–UCLA Medical Center, Los Angeles Mission College, El Cariso Community Regional Park, or the Nethercutt Museum, tell the dispatcher the nearest landmark and we will find you. Sylmar is served by I-5, I-210, SR-118, I-405, Foothill Boulevard, and Glenoaks Boulevard, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
Our keyless entry installation process, step by step
Discuss how the door is used
Who needs access, how often people change, whether remote control or an entry log is needed, and what the door is made of all shape the right choice.
Check the door and the site
We measure door thickness, backset and bore, check alignment and weather exposure, and for networked products test Wi-Fi strength at the door or plan the wiring.
Recommend equipment
You get a recommendation with the trade-offs explained: keypad or app, Bluetooth or Wi-Fi, standalone or networked, and the cost of each.
Install the hardware
The door is aligned so the bolt moves freely, then the lock, reader, strike or maglock is fitted to the manufacturer’s template and wired or powered.
Program users and settings
Default codes are removed, individual users are created, schedules and auto-lock are set, and firmware is updated.
Train and document
We walk you through adding and deleting users, changing batteries and using the mechanical override, and leave the settings documented.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Common situations in Sylmar
- A short-term rental needs a new code for every guest.
- A homeowner wants to let a contractor in while at work.
- An office wants to stop rekeying each time an employee leaves.
- A smart lock reports "jammed" every evening when the door swells.
- Children get home from school before their parents and keep losing keys.
- An apartment building wants to replace a shared entry key with fobs.
- A business needs to know who entered the stockroom and when.
Tools, parts and hardware we carry
We install and service keypad and smart deadbolts and levers from the major residential makers such as Schlage, Yale, Kwikset and August, and commercial electronic locks and access components including standalone keypad levers, card and fob readers, controllers, electric strikes, electromagnetic locks, request-to-exit sensors, push-to-exit buttons, power supplies with battery backup and door position switches. Matching each component to the door is what makes a system reliable.
Trade terms explained
- Credential
- Whatever identifies a user: a card, fob, PIN, phone or fingerprint.
- Smart lock
- A lock that can be operated by a code, phone or other credential, often with remote control.
- Fail-safe and fail-secure
- A fail-safe lock unlocks when power is lost; a fail-secure lock stays locked.
- Access control
- A system that decides who may pass through which door at what time, and records each entry.
- Maglock
- An electromagnetic lock that holds a door closed with a magnet and releases when power is cut.
- Electric strike
- A strike plate with a keeper that releases electrically so a locked door can be pushed open.
- Audit trail
- A stored record of which credential opened a door and when.
- Request to exit
- A sensor or button that releases an electrically locked door for someone leaving.
How keyless entry installation service is priced
- Life-safety requirements
- Maglocks and controlled exits need release devices and sometimes fire alarm connections to meet code.
- Grade of hardware
- Commercial Grade 1 electronic locks cost more than residential models and are built for far heavier use.
- Wiring and power
- Running cable, adding power supplies and battery backup takes time, especially in finished buildings.
- Software and credentials
- Cloud subscriptions, cards and fobs are ongoing or per-user costs worth understanding at the start.
- Type of system
- A standalone keypad lock is the least expensive. Smart locks cost more, and wired access control with readers and controllers the most.
- Door condition
- Doors that bind must be corrected first. Motorized locks cannot overcome friction that a hand can.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
Why call Big Daddy Car Key Replacement
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Sylmar.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.

Practical advice from our locksmiths
- Check that the door closes and latches on its own. Auto-lock cannot secure a door that is ajar.
- Wipe touchscreens occasionally so smudges do not reveal the digits in your code.
- Review the user list every few months and remove anyone who no longer needs access.
- Keep the mechanical override key somewhere accessible outside the locked area.
- Turn on two-factor authentication for any account that can unlock your door.
- Avoid obvious codes such as birth years, addresses or repeated digits.
- Keep firmware up to date. Updates often fix security issues.
- Delete factory default codes on the day of installation.
Doing it yourself versus calling a professional
Most complaints about electronic locks trace back to installation: a door out of alignment, a strike that pinches the bolt, a Wi-Fi bridge out of range, default codes left active, or a maglock installed without the release devices the code requires. A locksmith addresses the mechanical side first, then the electronics, and leaves a system that works every day and still lets people out safely when power is lost.
Our service standards
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
Choosing a locksmith: a short checklist
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Get an itemized receipt showing labor, parts and the business details.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
How to prepare for the visit
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Aftercare and records
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Sylmar
Customers who need keyless entry installation service often ask about these as well. Each can usually be handled in the same visit to Sylmar.
- Commercial Access Control Maintenance
Servicing card readers, fobs, electric strikes, maglocks and controllers.
- Keypad Lock Installation
Installing keypad deadbolts, digital door locks and electronic entry locks.
- Keypad Access Control
Installing keypad entry systems for offices and commercial buildings.
- Bluetooth Lock Installation
Installing Bluetooth-enabled locks.
- Commercial Smart Lock Installation
Installing electronic and app-controlled locks for businesses.
- Buzzer System Installation
Installing entry buzzers for offices, apartments and secured entrances.
- Smart Locks & Keyless Entry
Smart locks, keypad deadbolts and keyless entry systems supplied, installed and set up.
- User Access Management
Setting up different codes for employees, tenants, contractors, family members or guests.
- Electric Strike Installation
Installing electric strikes for buzz-in entry systems.
- Smart Lock Setup
Programming smart locks, connecting apps, setting user codes, deleting old codes and troubleshooting connectivity.
- Car Lockout
Unlocking vehicles when keys are locked inside.
- Panic Bar Installation
Installing panic bars, push bars and crash bars for emergency exits.
- Gate Lock Repair
Fixing stuck, broken, rusted or misaligned gate locks and latches.
- Lock Replacement
Replacing old, damaged, outdated or unsecured locks with new locks.
- Lost Car Key Replacement
Making a new car key when all keys are lost.
Keyless Entry Installation near Sylmar
We provide the same keyless entry installation service in the communities around Sylmar. See the main keyless entry installation page or the full list of service areas.
- Keyless Entry Installation in San Fernando
- Keyless Entry Installation in Pacoima
- Keyless Entry Installation in Granada Hills
- Keyless Entry Installation in Mission Hills
- Keyless Entry Installation in Arleta
- Keyless Entry Installation in Lake View Terrace
- Keyless Entry Installation in North Hills
- Keyless Entry Installation in Panorama City
- Keyless Entry Installation in Porter Ranch
- Keyless Entry Installation in Northridge
- Keyless Entry Installation in Sun Valley
- Keyless Entry Installation in Santa Clarita
Keyless Entry Installation in Sylmar: frequently asked questions
Can keyless entry be added to a gate?
Yes. A weather-rated keypad or reader with an electric gate lock or strike gives code entry on pedestrian gates, and driveway gates can be controlled through their operator.
Can you install a lock I already bought?
Yes. We install customer-supplied locks, correct the door alignment they depend on, and complete the app setup.
How many users can an electronic lock hold?
Residential keypad locks typically hold from a couple of dozen to a few hundred codes. Commercial systems manage thousands of users.
Can access be limited to certain days and times?
Yes. Most smart locks and all access control systems support schedules, temporary codes and automatic expiry.
What happens if the batteries or power fail?
Battery locks warn you for weeks and have a key or external power option. Wired systems should have battery backup, and exits are designed to release safely.
Will an electronic lock work on my existing door?
Most standard doors accept them. Very thick, thin, glass or metal doors need specific models, which we identify during the site check.
Which smart lock is best for a home in Sylmar?
It depends on the door and how you want to use it. A keypad deadbolt suits most households. Add Wi-Fi if you need remote control, or choose Bluetooth for longer battery life. We recommend models after seeing the door.
Can smart locks be hacked?
Reputable brands use strong encryption, and real-world break-ins overwhelmingly involve force, not hacking. Strong passwords, two-factor authentication and updated firmware keep the risk low.
Are you open 24 hours in Sylmar?
Yes. We take calls and dispatch to Sylmar 24 hours a day, including weekends and holidays.
Can you make car keys in Sylmar?
Yes. We cut and program car keys on site anywhere in Sylmar, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
How long does it take a locksmith to reach me in Sylmar?
It depends on where the nearest technician is and on traffic along I-5, I-210, or SR-118. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
