Quick answer
Drill-Resistant Lock Installation: Installing hardened locks and cylinders. Big Daddy Car Key Replacement provides drill-resistant lock installation service in Tarzana as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Drill-Resistant Lock Installation
- Area
- Tarzana, Los Angeles County, CA (91356, 91335)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Security Upgrade Services
- Phone
- (562) 550-7206
On this page
- What drill-resistant lock installation means
- Who uses this service
- Reasons to call for drill-resistant lock installation service
- Drill-Resistant Lock Installation across Tarzana
- How our drill-resistant lock installation service works
- Typical calls we receive
- Equipment and hardware on the van
- Terms worth knowing
- How drill-resistant lock installation service is priced
- What you can expect from us
- Practical advice from our locksmiths
- Doing it yourself versus calling a professional
- What we commit to
- Questions to ask any locksmith
- What to have ready when you call
- Once the work is done
- Related locksmith services in Tarzana
- Drill-Resistant Lock Installation near Tarzana
- Drill-Resistant Lock Installation in Tarzana: frequently asked questions
What drill-resistant lock installation means
Installing hardened locks and cylinders. Drilling attacks the shear line or the cylinder’s retaining screws. Drill-resistant locks place hardened steel pins, plates or ball bearings in those paths so bits skate or break. On commercial doors we add hardened cylinder collars and guard rings that also block wrench and pulling attacks.

Whether you want the strongest practical lock on a front door or key control for an entire business, our drill-resistant lock installation service in Tarzana starts with an honest look at what you have. Call (562) 550-7206 and we will explain what matters and what does not.
Who uses this service
Security upgrades in Tarzana are requested by new homeowners, people who have experienced or witnessed a break-in, landlords meeting their obligations, and businesses responding to theft, an insurance requirement or a contract that demands key control.
This service is part of our security upgrade services in Tarzana.
Reasons to call for drill-resistant lock installation service
If any of the following sounds familiar, drill-resistant lock installation service is likely what you need:
- A lock was drilled in a previous break-in
- You have exposed mortise or rim cylinders
- The door protects high-value contents
- You are fitting a new deadbolt and want it hardened
Drill-Resistant Lock Installation across Tarzana
Tarzana is a neighborhood of the City of Los Angeles in Los Angeles County, part of the San Fernando Valley area we cover every day. Customers anywhere in Tarzana, including the hills south of Ventura Boulevard, Braemar, Mulholland Park, and Melody Acres, can have a mobile technician sent directly to them. Service is available throughout ZIP codes 91356 and 91335.
Tarzana ranges from estates in gated enclaves south of the boulevard to mid-century homes in Melody Acres and medical offices near the hospital, with frequent requests for high-security locks and keyless entry.
If you are out and about near Providence Cedars-Sinai Tarzana Medical Center, Braemar Country Club, El Caballero Country Club, or Tarzana Recreation Center, give us that location when you call and wait somewhere safe and visible. Tarzana is served by US-101, Ventura Boulevard, Reseda Boulevard, Wilbur Avenue, Tampa Avenue, and Burbank Boulevard, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
How our drill-resistant lock installation service works
Understand the concern
A recent incident, an insurance request, lost keys or general unease each lead to different priorities. We start by asking what prompted the call.
Walk the entry points
Every exterior door, sliding door, gate and garage entry is checked for lock grade, bolt throw, strike and frame strength, and exposure.
Review key control
We ask who has keys, whether they can be copied freely, and whether anyone who should not have access still might.
Prioritize the recommendations
You receive a ranked list: the inexpensive fixes with the biggest effect first, then upgrades that are worthwhile but optional.
Install the upgrades
High-security cylinders, deadbolts, reinforced strikes, door wraps and latch guards are fitted, and locks are rekeyed to the new system.
Register and hand over
For restricted key systems we record the authorized signers and issue numbered keys, so every copy from then on is accounted for.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Typical calls we receive
- You suspect someone entered without leaving any sign of force.
- An insurer or client contract requires documented key control.
- A neighbor was burgled through the back door and you want to check your own.
- You are away for long periods and want the house properly secured.
- Keys have been issued for years and no one can say how many exist.
- A door was kicked in once and repaired with nothing stronger than before.
Equipment and hardware on the van
Security upgrades draw on a specific set of products: deadbolts and cylinders tested to UL 437 and the higher ANSI/BHMA grades, with hardened steel inserts, sidebars or other secondary locking and patent-protected keyways; heavy security strikes; full-length jamb reinforcement; wrap-around door plates; latch guards for out-swinging doors; hinge security studs; and secondary locks for sliding doors. We supply and install these and register key authorization for restricted systems.
Terms worth knowing
- High-security lock
- A lock independently tested to resist picking, drilling and forcing, usually with restricted keys.
- Patented keyway
- A key profile protected by patent, so blanks are legally restricted.
- UL 437
- A standard for key locks covering resistance to picking, drilling, prying and similar attacks.
- Security pins
- Specially shaped pins, such as spools, that make a lock harder to pick.
- Lock bumping
- Opening a pin tumbler lock with a specially cut key and a light tap.
- Hardened insert
- A piece of hardened steel placed inside a lock to stop drill bits.
- Key control
- Knowing how many keys exist and who holds them, supported by keys that cannot be freely copied.
- Reinforced strike
- A heavy strike plate fastened with long screws into the wall framing.
How drill-resistant lock installation service is priced
- Number of doors
- Most properties need the best hardware on two or three primary doors, not on every door.
- Door and frame condition
- A weak door or damaged frame needs reinforcement or replacement before a strong lock can help.
- Level of protection
- A reinforced strike and better deadbolt are modest in cost. UL-listed high-security locks with patented keys cost considerably more.
- Key system
- Restricted keys cost more per key and are worth it where duplication control matters.
- Commercial requirements
- Business upgrades must respect fire and egress codes, which can determine the hardware.
- Retrofit or full replacement
- Fitting high-security cylinders into existing locks is often cheaper than replacing whole locksets.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Tarzana. The technician confirms the figure before starting.
What you can expect from us
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.

Practical advice from our locksmiths
- Add secondary locks and anti-lift protection to sliding doors.
- Do not rely on a "Do Not Duplicate" stamp for key control.
- Spend first on the frame: a reinforced strike with three-inch screws does more than an expensive lock on a weak jamb.
- Solid-core or metal doors are a prerequisite. Hardware cannot rescue a hollow door.
- Trim shrubs near doors and keep entries lit. Visibility is a deterrent.
- Rekey after any loss of keys and after any change in who should have access.
- Treat the door from the garage to the house as an exterior door.
- Use restricted keys if you need to know exactly how many copies exist.
Doing it yourself versus calling a professional
It is easy to spend money on security that does little, such as a premium lock mounted on a jamb that splits with one kick, or a restricted key system undermined by one unprotected door. A locksmith looks at the whole opening and the whole key system, puts the budget where it has the most effect, and installs hardware so that it reaches the building’s structure.
What we commit to
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Questions to ask any locksmith
- Get an itemized receipt showing labor, parts and the business details.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
What to have ready when you call
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Once the work is done
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Tarzana
Customers who need drill-resistant lock installation service often ask about these as well. Each can usually be handled in the same visit to Tarzana.
- High Security Locks
Locks engineered to resist picking, bumping, drilling and unauthorized key copying.
- Key Control Systems
Installing lock systems that prevent unauthorized key copies.
- Home Security Lock Upgrade
Upgrading locks to improve safety and reduce break-in risk.
- Commercial Security Upgrade
Improving locks, access control, exit devices and door hardware for businesses.
- Lock Security Assessment
Inspecting locks, doors, frames and access points to recommend improvements.
- Anti-Bump Lock Installation
Installing locks designed to resist lock bumping.
- Rental Property Security Upgrade
Changing locks, rekeying units, securing mailboxes and upgrading common areas.
- Pick-Resistant Lock Installation
Installing locks with higher resistance to picking.
- Reinforced Door Hardware
Installing heavy-duty hardware for better protection.
- Car Key Replacement
Replacing lost, stolen or damaged car keys.
- Business Lockout
Unlocking offices, storefronts, warehouses, restaurants, retail stores and commercial buildings.
- Change Locks
Swapping out the locks on your doors for new ones, with new keys, in one visit.
- Car Lockout
Unlocking vehicles when keys are locked inside.
- Mobile Locksmith
A locksmith that comes directly to the customer’s location.
Drill-Resistant Lock Installation near Tarzana
We provide the same drill-resistant lock installation service in the communities around Tarzana. See the main drill-resistant lock installation page or the full list of service areas.
- Drill-Resistant Lock Installation in Reseda
- Drill-Resistant Lock Installation in Woodland Hills
- Drill-Resistant Lock Installation in Encino
- Drill-Resistant Lock Installation in Winnetka
- Drill-Resistant Lock Installation in Canoga Park
- Drill-Resistant Lock Installation in Lake Balboa
- Drill-Resistant Lock Installation in Northridge
- Drill-Resistant Lock Installation in West Hills
- Drill-Resistant Lock Installation in Hidden Hills
- Drill-Resistant Lock Installation in Van Nuys
- Drill-Resistant Lock Installation in Topanga
- Drill-Resistant Lock Installation in North Hills
Drill-Resistant Lock Installation in Tarzana: frequently asked questions
How do I know if my lock is drill resistant?
Look for a UL 437 listing or a manufacturer statement of hardened steel inserts. Standard residential locks are plain brass and have little drill resistance.
Can I upgrade security without replacing all my locks?
Usually. Many locks accept high-security replacement cylinders, and reinforcement hardware fits around existing locks.
Do you offer a security assessment?
Yes. We inspect doors, locks, frames and key control and give you a prioritized list of improvements.
What do the ANSI/BHMA grades mean?
They are performance ratings. Grade 1 is the highest for strength and durability, Grade 2 is solid residential quality, and Grade 3 is basic.
What is the best security upgrade for a property in Tarzana?
For most homes: a quality deadbolt with a one-inch bolt on each exterior door, reinforced strikes with long screws, and a rekey so only known keys exist. Businesses add high-security cylinders, latch guards and key control.
Are high-security locks worth the price?
On primary doors, yes. They resist picking, bumping and drilling, and their restricted keys cannot be copied without your authorization.
How do burglars usually get in?
Most often by forcing a door, kicking or prying at the latch side, or through an unlocked door or window. Reinforcing the door and frame addresses the most common method.
What does UL 437 mean?
It is a standard for key locks that requires resistance to picking, drilling and other attacks for specified times. A lock with that listing has been independently tested.
Which parts of Tarzana do you serve?
All of Tarzana, including the hills south of Ventura Boulevard, Braemar, Mulholland Park, and Melody Acres, and addresses in ZIP codes 91356 and 91335.
Do you have a locksmith shop in Tarzana?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Tarzana and the rest of the San Fernando Valley area. All work is done at your location.
Can you make car keys in Tarzana?
Yes. We cut and program car keys on site anywhere in Tarzana, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
