Quick answer
Panic Bar Installation: Installing panic bars, push bars and crash bars for emergency exits. Big Daddy Car Key Replacement provides panic bar installation service in Tarzana as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Panic Bar Installation
- Area
- Tarzana, Los Angeles County, CA (91356, 91335)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Commercial Locksmith Services
- Phone
- (562) 550-7206
On this page
- What panic bar installation involves
- Who we help in Tarzana
- When you need panic bar installation service
- Panic Bar Installation across Tarzana
- How our panic bar installation service works
- Situations we handle regularly
- What our technicians bring
- Trade terms explained
- How panic bar installation service is priced
- What you can expect from us
- Practical advice from our locksmiths
- Doing it yourself versus calling a professional
- What we commit to
- Questions to ask any locksmith
- What to have ready when you call
- Once the work is done
- Related locksmith services in Tarzana
- Panic Bar Installation near Tarzana
- Panic Bar Installation in Tarzana: frequently asked questions
What panic bar installation involves
Installing panic bars, push bars and crash bars for emergency exits. A panic bar lets anyone open an exit door by pushing a horizontal bar, with no key or special knowledge, which is what building and fire codes require on many exits. We install rim, mortise and vertical-rod devices, match fire-rated doors with fire exit hardware, and add outside trim or an alarm where needed.

Every business in Tarzana eventually faces the same questions. Who has keys? Do the exit doors work? Would the back door survive a pry bar? Our panic bar installation service gives practical answers and carries out the work, usually in a single visit and with as little disruption as possible.
Who we help in Tarzana
Our commercial customers in Tarzana include retail shops, restaurants, offices, medical and dental practices, warehouses, schools, places of worship, property management companies and homeowners associations. Some need a one-time rekey after a staffing change, others an ongoing arrangement covering key systems, exit hardware and door maintenance across several sites.
This service is part of our commercial locksmith services in Tarzana.
When you need panic bar installation service
These are the most common reasons customers in Tarzana ask for panic bar installation service:
- An inspector required panic hardware on an exit
- An exit is secured with a deadbolt or padlock
- You are opening an assembly or retail space
- A back door needs to lock from outside but open freely from inside
Panic Bar Installation across Tarzana
Tarzana is a neighborhood of the City of Los Angeles in Los Angeles County, part of the San Fernando Valley area we cover every day. Our panic bar installation service reaches all of Tarzana, including the hills south of Ventura Boulevard, Braemar, Mulholland Park, and Melody Acres, as well as the streets in between. You do not need to bring anything to a shop. That includes addresses in ZIP codes 91356 and 91335.
Tarzana ranges from estates in gated enclaves south of the boulevard to mid-century homes in Melody Acres and medical offices near the hospital, with frequent requests for high-security locks and keyless entry.
If you are out and about near Providence Cedars-Sinai Tarzana Medical Center, Braemar Country Club, El Caballero Country Club, or Tarzana Recreation Center, give us that location when you call and wait somewhere safe and visible. Technicians usually reach Tarzana by US-101, Ventura Boulevard, Reseda Boulevard, Wilbur Avenue, Tampa Avenue, and Burbank Boulevard. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
How our panic bar installation service works
Discuss the need and the site
We ask about the type of business, the doors involved and any deadline, such as an inspection, a tenant move-in or a termination. Photos of the doors help us arrive with the right parts.
Verify authority
Work on a commercial property is done for the owner, the tenant of record, or the property manager. We confirm that before any lock is opened or changed.
Survey the openings
Each door is checked for lock type and function, closer, hinges or pivots, exit hardware and fire rating, so the solution fits both the security need and the code.
Agree scope and price
You receive a clear scope: which doors, what hardware, how many keys, and the cost. For key systems we draft the hierarchy for your approval first.
Carry out the work around your schedule
Rekeys, repairs and installations are done before opening, after closing or during quiet hours when that suits the business better.
Test, document and hand over
Every door is tested for locking, latching and free exit. Keys are stamped and counted, and for master systems you receive a record of what opens what.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Situations we handle regularly
- The storefront door will not latch and the shop cannot be left for the night.
- A fire inspection notes that the rear exit has a slide bolt and no panic hardware.
- A closer has failed and the front door slams hard enough to rattle the glass.
- Staff need access to the sales floor but not the office, stockroom or IT closet.
- You are taking over a suite and need the previous tenant’s keys cut off before move-in.
- A manager is let go and returns only some of the keys issued.
- The back door shows pry marks around the latch after the weekend.
What our technicians bring
Commercial doors use purpose-built hardware. Aluminum storefronts typically carry Adams Rite-style deadlatches and hook bolts driven by a mortise cylinder. Hollow metal and wood doors use Grade 1 cylindrical levers or mortise locks from makers such as Schlage, Sargent, Corbin Russwin and Yale. Exits use panic and fire exit devices, and closers from LCN, Norton and similar makers control the swing. Interchangeable cores allow fast rekeying. We stock the common cylinders, cams, tailpieces, lock bodies and closers.
Trade terms explained
- Restricted keyway
- A key profile whose blanks are supplied only to authorized locksmiths, preventing unauthorized copies.
- Mortise lock
- A heavy-duty lock housed in a pocket cut into the door edge, combining latch and deadbolt in one case.
- Cylindrical lock
- A lock installed through a round bore in the door, with the mechanism in the lever or knob assembly.
- Interchangeable core
- A removable lock core that a control key releases, allowing a door to be rekeyed in seconds.
- Door closer
- A hydraulic device that closes a door at a controlled speed and holds it latched.
- Master key system
- A planned arrangement in which each lock has its own key and a master key opens all of them.
- Lock function
- How a lock behaves, such as entry, storeroom, classroom or passage, which determines when it is locked and who can lock it.
- Exit device
- Panic or fire exit hardware that unlatches a door when the horizontal bar is pushed.
How panic bar installation service is priced
- After-hours scheduling
- Work outside normal hours avoids disruption and may be priced differently. We quote both where it matters.
- Electrified hardware
- Doors tied to access control, electric strikes or maglocks need wiring and coordination that add time.
- Key system complexity
- A simple rekey to one key is quick. A master or grand master system takes planning, more pinning time and record keeping.
- Code and fire-rating requirements
- Fire-rated openings need listed hardware, and exits may need panic devices. Compliance can dictate the product.
- Number and type of doors
- Aluminum storefront doors, hollow metal doors and wood office doors use different hardware. Pricing reflects how many openings are involved and what each requires.
- Hardware grade and function
- Grade 1 mortise locks and exit devices cost more than cylindrical levers, and they last far longer on busy doors.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Tarzana. The technician confirms the figure before starting.
What you can expect from us
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.

Practical advice from our locksmiths
- Store spare keys in a locked key cabinet, not a desk drawer.
- Use a restricted keyway if staff copying keys is a concern. A "Do Not Duplicate" stamp alone does not prevent copies.
- Rekey whenever a keyholder leaves on poor terms or a key cannot be accounted for.
- Never chain, padlock or bolt a required exit door while the building is occupied.
- Consider keypad or card access for doors with frequent staff turnover.
- Fit latch guards on out-swinging back doors, where the latch is exposed to prying.
- Keep a written key log: who holds which key, and the date it was issued and returned.
- Give each employee access only to the doors their job requires.
Doing it yourself versus calling a professional
Commercial doors are regulated in ways that homes are not. The wrong lock function can trap someone inside a storeroom, a deadbolt on an exit can fail an inspection or cost a life, and unlisted hardware can void a fire door’s rating. A commercial locksmith knows the functions, the grades and the applicable codes, keeps your key system mathematically sound, and documents the work so the next change is straightforward.
What we commit to
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Questions to ask any locksmith
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Get an itemized receipt showing labor, parts and the business details.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
What to have ready when you call
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Once the work is done
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Tarzana
Customers who need panic bar installation service often ask about these as well. Each can usually be handled in the same visit to Tarzana.
- Cash Drawer Lock Replacement
Replacing locks on registers, cash drawers and POS stations.
- Business Lockout
Unlocking offices, storefronts, warehouses, restaurants, retail stores and commercial buildings.
- Commercial Lock Rekeying
Rekeying locks after employee turnover, lost keys, tenant changes or security concerns.
- Commercial Door Hardware
Supplying and installing commercial-grade levers, pulls, hinges, closers, exit devices, strikes and protective plates.
- High-Security Commercial Locks
Installing restricted keyway locks, pick-resistant locks, drill-resistant locks and bump-resistant lock systems.
- Commercial Lock Change
Replacing commercial-grade locks on offices, entry doors, back doors, storage rooms and restricted areas.
- Mortise Lock Installation
Installing commercial mortise lock bodies, cylinders, trims and handles.
- Exit Device Repair
Fixing commercial exit devices, dogging mechanisms, latches, rods and trim.
- IC Core Lock Systems
Installing and rekeying interchangeable core lock systems for commercial properties.
- Exit Device Installation
Installing code-compliant exit devices for commercial emergency exits.
- House Lockout
Unlocking front doors, back doors, side doors, garage entry doors and interior doors, without damaging the lock whenever possible.
- Safe Locksmith
Opening, repairing, servicing and changing combinations on home and business safes.
- High Security Locks
Locks engineered to resist picking, bumping, drilling and unauthorized key copying.
- 24 Hour Locksmith
Locksmith help day or night, every day of the year.
- Smart Lock Installation
Installing smart locks, keypad locks, Wi-Fi locks, Bluetooth locks, app-controlled locks and keyless entry systems.
Panic Bar Installation near Tarzana
We provide the same panic bar installation service in the communities around Tarzana. See the main panic bar installation page or the full list of service areas.
- Panic Bar Installation in Reseda
- Panic Bar Installation in Woodland Hills
- Panic Bar Installation in Encino
- Panic Bar Installation in Winnetka
- Panic Bar Installation in Canoga Park
- Panic Bar Installation in Lake Balboa
- Panic Bar Installation in Northridge
- Panic Bar Installation in West Hills
- Panic Bar Installation in Hidden Hills
- Panic Bar Installation in Van Nuys
- Panic Bar Installation in Topanga
- Panic Bar Installation in North Hills
Panic Bar Installation in Tarzana: frequently asked questions
When is a panic bar required?
Model codes used in California generally require panic hardware on exit doors serving assembly and educational occupancies with 50 or more occupants and certain hazardous areas. Your local fire marshal or building official makes the final determination for your space.
How long does it take to rekey a business?
A small shop or office with a handful of doors usually takes about an hour. Larger sites and master key systems are scheduled by scope.
What brands of commercial hardware do you service?
We work with the major commercial lines, including Schlage, Sargent, Corbin Russwin, Yale, Best, Adams Rite, Von Duprin, LCN, Norton and Kaba, and can match most existing hardware.
How do we stop employees from copying keys?
Install a restricted key system. Its blanks are available only through the authorized locksmith and copies are cut only for people on your signature list.
Can you provide documentation for our records?
Yes. For rekeys and key systems we provide a key schedule listing doors, key numbers and the quantity of keys issued.
Can you work outside our business hours in Tarzana?
Yes. We are open 24 hours and regularly schedule rekeys, repairs and installations before opening or after closing so customers and staff are not disturbed.
Who is allowed to authorize lock changes for a business?
The owner, the tenant named on the lease, or the property manager. We verify authority before changing or opening any commercial lock.
Do you offer ongoing service for multiple locations?
Yes. We service multi-site businesses and managed properties across our service area and keep key records so later changes are fast.
Are you open 24 hours in Tarzana?
Yes. We take calls and dispatch to Tarzana 24 hours a day, including weekends and holidays.
How long does it take a locksmith to reach me in Tarzana?
It depends on where the nearest technician is and on traffic along US-101, Ventura Boulevard, or Reseda Boulevard. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Do you have a locksmith shop in Tarzana?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Tarzana and the rest of the San Fernando Valley area. All work is done at your location.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County and Ventura County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
