Quick answer
Electric Strike Installation: Installing electric strikes for buzz-in entry systems. Big Daddy Car Key Replacement provides electric strike installation service in Topanga as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Electric Strike Installation
- Area
- Topanga, Los Angeles County, CA (90290)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Access Control & Electronic Lock Services
- Phone
- (562) 550-7206
On this page
- About our electric strike installation service
- Customers we serve in Topanga
- Reasons to call for electric strike installation service
- Electric Strike Installation across Topanga
- What happens when you call
- Situations we handle regularly
- What our technicians bring
- Trade terms explained
- What affects the cost of electric strike installation service
- What you can expect from us
- Advice worth knowing
- Professional service compared with doing it yourself
- What we commit to
- Questions to ask any locksmith
- What to have ready when you call
- Aftercare and records
- Related locksmith services in Topanga
- Electric Strike Installation near Topanga
- Electric Strike Installation in Topanga: frequently asked questions
About our electric strike installation service
Installing electric strikes for buzz-in entry systems. An electric strike replaces the fixed strike in the frame with one whose keeper releases electrically, letting the door be pushed open while the lock stays locked. It works with your existing lockset or exit device, keeps the door latched during a power loss when set fail-secure, and is the standard choice for buzz-in doors.

A smart lock or access system is only as good as its installation. The door must be aligned, the hardware matched to the opening, and the software configured with sensible codes and permissions. Our electric strike installation service in Topanga takes care of each part and shows you how to use it.
Customers we serve in Topanga
Electronic lock and access control customers in Topanga range from households that want to stop hiding keys, to short-term rental hosts issuing guest codes, to offices, clinics, gyms, apartment buildings and warehouses that need to control and record who enters.
This service is part of our access control & electronic lock services in Topanga.
Reasons to call for electric strike installation service
If any of the following sounds familiar, electric strike installation service is likely what you need:
- You want to buzz visitors in from a desk
- An access system is being added to an existing lock
- The door must stay locked if power fails
- A panic-bar door needs electric release
Electric Strike Installation across Topanga
Topanga is an unincorporated community in Los Angeles County, part of the Las Virgenes & Malibu area we cover every day. Our electric strike installation service reaches all of Topanga, including Fernwood, Old Canyon, the Post Office Tract, Top O’ Topanga, and Viewridge, as well as the streets in between. You do not need to bring anything to a shop. Service is available throughout ZIP code 90290.
Topanga is a canyon community of hillside cabins, custom homes and long private drives, where cell coverage can be patchy and a spare key or keypad lock saves a long wait.
If you are out and about near Topanga State Park, Will Geer’s Theatricum Botanicum, Pine Tree Circle, or Red Rock Canyon Park, give us that location when you call and wait somewhere safe and visible. Topanga is served by Topanga Canyon Boulevard, Old Topanga Canyon Road, Fernwood Pacific Drive, Tuna Canyon Road, and Entrada Road, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
What happens when you call
Discuss how the door is used
Who needs access, how often people change, whether remote control or an entry log is needed, and what the door is made of all shape the right choice.
Check the door and the site
We measure door thickness, backset and bore, check alignment and weather exposure, and for networked products test Wi-Fi strength at the door or plan the wiring.
Recommend equipment
You get a recommendation with the trade-offs explained: keypad or app, Bluetooth or Wi-Fi, standalone or networked, and the cost of each.
Install the hardware
The door is aligned so the bolt moves freely, then the lock, reader, strike or maglock is fitted to the manufacturer’s template and wired or powered.
Program users and settings
Default codes are removed, individual users are created, schedules and auto-lock are set, and firmware is updated.
Train and document
We walk you through adding and deleting users, changing batteries and using the mechanical override, and leave the settings documented.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Situations we handle regularly
- An apartment building wants to replace a shared entry key with fobs.
- Children get home from school before their parents and keep losing keys.
- A homeowner wants to let a contractor in while at work.
- A short-term rental needs a new code for every guest.
- An office wants to stop rekeying each time an employee leaves.
- A smart lock reports "jammed" every evening when the door swells.
- A business needs to know who entered the stockroom and when.
What our technicians bring
We install and service keypad and smart deadbolts and levers from the major residential makers such as Schlage, Yale, Kwikset and August, and commercial electronic locks and access components including standalone keypad levers, card and fob readers, controllers, electric strikes, electromagnetic locks, request-to-exit sensors, push-to-exit buttons, power supplies with battery backup and door position switches. Matching each component to the door is what makes a system reliable.
Trade terms explained
- Access control
- A system that decides who may pass through which door at what time, and records each entry.
- Electric strike
- A strike plate with a keeper that releases electrically so a locked door can be pushed open.
- Maglock
- An electromagnetic lock that holds a door closed with a magnet and releases when power is cut.
- Audit trail
- A stored record of which credential opened a door and when.
- Fail-safe and fail-secure
- A fail-safe lock unlocks when power is lost; a fail-secure lock stays locked.
- Smart lock
- A lock that can be operated by a code, phone or other credential, often with remote control.
- Credential
- Whatever identifies a user: a card, fob, PIN, phone or fingerprint.
- Request to exit
- A sensor or button that releases an electrically locked door for someone leaving.
What affects the cost of electric strike installation service
- Door condition
- Doors that bind must be corrected first. Motorized locks cannot overcome friction that a hand can.
- Number of doors
- Each controlled door needs its own lock hardware and, for wired systems, cabling back to a controller.
- Wiring and power
- Running cable, adding power supplies and battery backup takes time, especially in finished buildings.
- Grade of hardware
- Commercial Grade 1 electronic locks cost more than residential models and are built for far heavier use.
- Life-safety requirements
- Maglocks and controlled exits need release devices and sometimes fire alarm connections to meet code.
- Type of system
- A standalone keypad lock is the least expensive. Smart locks cost more, and wired access control with readers and controllers the most.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Topanga. The technician confirms the figure before starting.
What you can expect from us
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.

Advice worth knowing
- Delete factory default codes on the day of installation.
- Avoid obvious codes such as birth years, addresses or repeated digits.
- Check that the door closes and latches on its own. Auto-lock cannot secure a door that is ajar.
- Wipe touchscreens occasionally so smudges do not reveal the digits in your code.
- Keep the mechanical override key somewhere accessible outside the locked area.
- Use fresh, name-brand alkaline batteries. Many locks misread rechargeable cells.
- Review the user list every few months and remove anyone who no longer needs access.
- Turn on two-factor authentication for any account that can unlock your door.
Professional service compared with doing it yourself
Most complaints about electronic locks trace back to installation: a door out of alignment, a strike that pinches the bolt, a Wi-Fi bridge out of range, default codes left active, or a maglock installed without the release devices the code requires. A locksmith addresses the mechanical side first, then the electronics, and leaves a system that works every day and still lets people out safely when power is lost.
What we commit to
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Questions to ask any locksmith
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Get an itemized receipt showing labor, parts and the business details.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
What to have ready when you call
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Aftercare and records
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Topanga
Customers who need electric strike installation service often ask about these as well. Each can usually be handled in the same visit to Topanga.
- Wi-Fi Lock Installation
Installing Wi-Fi-enabled locks.
- Commercial Access Control Maintenance
Servicing card readers, fobs, electric strikes, maglocks and controllers.
- Smart Lock Installation
Installing smart locks, keypad locks, Wi-Fi locks, Bluetooth locks, app-controlled locks and keyless entry systems.
- Magnetic Lock Installation
Installing maglocks for controlled entry doors.
- Digital Lock Repair
Repairing malfunctioning electronic locks.
- Electronic Lock Installation
Installing electronic locks for homes and businesses.
- Keyless Entry Installation
Installing keyless entry systems for doors and gates.
- Smart Lock Setup
Programming smart locks, connecting apps, setting user codes, deleting old codes and troubleshooting connectivity.
- Keypad Access Control
Installing keypad entry systems for offices and commercial buildings.
- Key Fob Access Systems
Installing and programming key fob systems.
- Lock Installation
Installing new locks on doors that need added security, including exterior doors, bedroom doors, home offices, gates and garage access doors.
- Commercial Door Hardware
Supplying and installing commercial-grade levers, pulls, hinges, closers, exit devices, strikes and protective plates.
- Automotive Locksmith
Mobile key, lock and ignition service for cars, trucks, SUVs, vans, motorcycles and fleets.
- Change Locks
Swapping out the locks on your doors for new ones, with new keys, in one visit.
- Rekey Locks
Resetting your existing locks to a new key so previous keys stop working, without replacing the hardware.
Electric Strike Installation near Topanga
We provide the same electric strike installation service in the communities around Topanga. See the main electric strike installation page or the full list of service areas.
- Electric Strike Installation in Calabasas
- Electric Strike Installation in Woodland Hills
- Electric Strike Installation in Hidden Hills
- Electric Strike Installation in Tarzana
- Electric Strike Installation in Encino
- Electric Strike Installation in Canoga Park
- Electric Strike Installation in West Hills
- Electric Strike Installation in Santa Monica
- Electric Strike Installation in Reseda
- Electric Strike Installation in Winnetka
- Electric Strike Installation in Lake Balboa
- Electric Strike Installation in Sherman Oaks
Electric Strike Installation in Topanga: frequently asked questions
What is the difference between an electric strike and a maglock?
An electric strike releases the latch of a normal lock and can stay locked without power. A maglock holds the door with a magnet and always unlocks when power is lost.
Can access be limited to certain days and times?
Yes. Most smart locks and all access control systems support schedules, temporary codes and automatic expiry.
Do I need Wi-Fi for a keypad lock?
No. A standalone keypad lock works with no network at all. Wi-Fi is needed only for remote control and notifications.
What happens if the batteries or power fail?
Battery locks warn you for weeks and have a key or external power option. Wired systems should have battery backup, and exits are designed to release safely.
Can you install a lock I already bought?
Yes. We install customer-supplied locks, correct the door alignment they depend on, and complete the app setup.
Will an electronic lock work on my existing door?
Most standard doors accept them. Very thick, thin, glass or metal doors need specific models, which we identify during the site check.
Which smart lock is best for a home in Topanga?
It depends on the door and how you want to use it. A keypad deadbolt suits most households. Add Wi-Fi if you need remote control, or choose Bluetooth for longer battery life. We recommend models after seeing the door.
Can smart locks be hacked?
Reputable brands use strong encryption, and real-world break-ins overwhelmingly involve force, not hacking. Strong passwords, two-factor authentication and updated firmware keep the risk low.
How long does it take a locksmith to reach me in Topanga?
It depends on where the nearest technician is and on traffic along Topanga Canyon Boulevard, Old Topanga Canyon Road, or Fernwood Pacific Drive. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Can you make car keys in Topanga?
Yes. We cut and program car keys on site anywhere in Topanga, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Is there a travel charge for Topanga?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Topanga, so you know the cost in advance.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
