Skip to content
Big Daddy Car Key Replacement logo(562) 550-7206

Strike Plate Adjustment in Torrance, CA

Big Daddy Car Key Replacement provides strike plate adjustment service throughout Torrance. We come to you at any hour with the tools and parts to finish the job on site. Adjusting strike plates so doors latch and lock properly.

(562) 550-7206
  • Open 24 hours, every day
  • We come to you
  • Price range before we dispatch
Strike Plate Adjustment in Torrance, CA by Big Daddy Car Key Replacement

Quick answer

Strike Plate Adjustment: Adjusting strike plates so doors latch and lock properly. Big Daddy Car Key Replacement provides strike plate adjustment service in Torrance as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.

Last updated

Service
Strike Plate Adjustment
Area
Torrance, Los Angeles County, CA (90501, 90502, 90503, 90504, 90505)
Hours
Open 24 hours, 7 days a week
Service type
Mobile, at your location
Category
Door Hardware Services
Phone
(562) 550-7206
On this page

About our strike plate adjustment service

Adjusting strike plates so doors latch and lock properly. The strike plate is the metal plate on the frame that receives the latch or bolt. If it sits a few millimetres off, the door rattles, will not latch, or the deadbolt binds. We reposition the plate, deepen the bolt pocket if it is too shallow, and secure it with long screws into the stud.

Strike Plate Adjustment in Torrance, CA by Big Daddy Car Key Replacement
Strike Plate Adjustment in Torrance: mobile service, carried out at your location.

Doors in Torrance deal with settling foundations, seasonal humidity, sun-baked frames and years of daily use. Our strike plate adjustment service corrects the misalignment, wear and loose hardware that make doors hard to close or lock, and adds reinforcement where a door is weaker than it should be.

Who we help in Torrance

Door hardware calls in Torrance come from homeowners with doors that stick or will not latch, landlords preparing units, businesses with heavily used entrances, and anyone who has had a door forced. Older buildings with settled frames and newer homes with lightly built doors both benefit from proper alignment and reinforcement.

This service is part of our door hardware services in Torrance.

Signs you need strike plate adjustment service

People in Torrance usually call us for strike plate adjustment service in situations like these:

  • The door rattles when closed
  • The latch hits the plate instead of entering
  • The deadbolt only extends partway
  • Scrape marks show above or below the strike hole

Strike Plate Adjustment across Torrance

Torrance is an incorporated city in Los Angeles County, part of the South Bay area we cover every day. Customers anywhere in Torrance, including Old Torrance, the Hollywood Riviera, Walteria, Southwood, West Torrance, North Torrance, and Seaside Ranchos, can have a mobile technician sent directly to them. We serve the 90501, 90502, 90503, 90504, and 90505 ZIP codes.

Torrance is the South Bay’s largest city and a longtime home of Japanese automakers’ U.S. operations, with huge retail centers, industrial parks and neighborhoods of 1950s homes that keep every locksmith service busy.

Whether you are at home, at work, or stuck near Del Amo Fashion Center, Torrance Beach, Zamperini Field, Madrona Marsh Preserve, or Torrance Memorial Medical Center, tell the dispatcher the nearest landmark and we will find you. Technicians usually reach Torrance by I-405, I-110, Pacific Coast Highway, Hawthorne Boulevard, Crenshaw Boulevard, and Torrance Boulevard. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.

How our strike plate adjustment service works

  1. Describe the symptom

    Tell us what the door does: rubs, rattles, will not latch, needs lifting to lock, or sticks at certain times of year. Symptoms point to the cause.

  2. Inspect the whole opening

    The technician checks the hinge screws, the gap around the door, the latch, the bolt, the strike plate and the frame for movement or damage.

  3. Find the root cause

    Marks on the strike plate, uneven gaps and loose hinges show whether the door has dropped, the frame has shifted, or the hardware itself has failed.

  4. Agree the repair and price

    You hear what needs adjusting, what needs replacing and what would be worth reinforcing, with prices, before work starts.

  5. Make the repair

    Hinges are re-anchored or shimmed, strikes repositioned and secured with long screws, latches replaced and bolt pockets deepened as required.

  6. Test under real conditions

    The door is closed normally, latched and locked several times. The deadbolt should extend fully without pushing or pulling on the door.

On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Locksmith providing strike plate adjustment service in Torrance, California
Our technicians work from fully equipped vans throughout Torrance.

Common situations in Torrance

  • The back door swings outward and its latch is visible through the gap.
  • The door drifts open by itself because the latch no longer catches.
  • A previous break-in left the jamb cracked around the strike.
  • The deadbolt only turns if you pull the door hard toward you.
  • A latch has jammed and someone is stuck in a room.
  • The top corner of the door rubs the frame and the paint is wearing through.

What our technicians bring

For door hardware work we carry replacement latches and deadlatches, adjustable and extended strike plates, heavy security strikes, jamb reinforcement kits, wrap-around door plates in common finishes and sizes, latch guards, residential and commercial hinges, hinge shims, three-inch case-hardened screws, door viewers, swing-bar guards and chains. For commercial openings we add pivot sets, continuous hinges and door closers. The right small part, fitted properly, is usually all a troublesome door needs.

Trade terms explained

Deadlatch
A latch with a small plunger that stops it being pushed back with a card once the door is closed.
Strike plate
The plate on the frame that receives the latch or bolt.
Door wrap
A metal plate that wraps the door edge around the lock to reinforce it against splitting.
Latch
The spring-loaded bolt that holds a door closed and retracts when the handle is turned.
Bolt throw
How far a deadbolt extends from the door edge. One inch is the standard for security.
Jamb
The vertical part of the door frame that carries the hinges on one side and the strike on the other.
Latch guard
A plate covering the gap at the lock so the latch cannot be reached with a pry tool.
Shim
A thin spacer placed behind a hinge to adjust how the door sits in its frame.

Cost factors for strike plate adjustment service

Extent of damage
A split jamb or cracked door edge from a kick-in needs reinforcement hardware and more time than a simple alignment.
Hardware quality
Heavy-duty hinges, commercial closers and Grade 1 latches cost more than light residential parts and last longer.
Adjustment or replacement
Tightening, shimming and repositioning are labor only. New latches, hinges, strikes or reinforcement plates add parts.
Door and frame material
Wood is the easiest to adjust. Metal frames, aluminum storefronts and fiberglass doors need different methods and parts.
Number of doors
Several doors in one visit cost less per door than separate calls.
Reinforcement level
A security strike is inexpensive. A full jamb shield and door wrap kit costs more and adds much more strength.

Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Torrance. The technician confirms the figure before starting.

Why call Big Daddy Car Key Replacement

Most jobs finished in one visit
Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
A workshop that comes to you
Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
A price range before we dispatch
When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
Plain explanations
We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
Non-destructive methods first
Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
Car key specialists
Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
A real, reachable business
Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
Door Hardware locksmith work in Torrance, CA
Door Hardware Services from Big Daddy Car Key Replacement.

Advice worth knowing

  • Replace hollow-core exterior doors. No lock makes a weak door strong.
  • Tighten hinge screws once a year. Replace any that spin with three-inch screws into the framing.
  • Lubricate latches and hinges lightly once a year, and wipe away the excess.
  • Look for shiny rub marks on the strike plate. They show exactly where the latch or bolt is hitting.
  • A deadbolt must extend fully to be locked. If it stops short, it can be pushed back.
  • Seal the top and bottom edges of wood doors with paint so they absorb less moisture and swell less.
  • Do not file the strike larger each season. Fix the alignment so the bolt enters cleanly.
  • Out-swinging doors should have hinges with non-removable pins or security studs.

Why this is a job for a locksmith

Door adjustment is a matter of small measurements with large effects. Moving a strike two millimetres the wrong way, over-shimming a hinge or deepening a mortise carelessly can turn a sticking door into one that will not close. A locksmith reads the wear marks, corrects the cause instead of the symptom, and uses fasteners and reinforcement that actually reach the structure of the wall.

Our service standards

We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.

How to choose a locksmith you can trust

  • Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
  • Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
  • In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
  • Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
  • Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
  • Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
  • Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
  • Get an itemized receipt showing labor, parts and the business details.

Before you call (562) 550-7206

  • Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
  • What you need help with: the type of door, lock or vehicle, and what has happened.
  • For vehicles, the year, make and model, and whether you have any working key.
  • A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
  • A phone number where the technician can reach you on the way.
  • Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.

Aftercare and records

Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.

Customers who need strike plate adjustment service often ask about these as well. Each can usually be handled in the same visit to Torrance.

  • Door Alignment for Locks

    Fixing lock issues caused by sagging doors, shifted frames or misalignment.

  • Door Guard Installation

    Installing flip guards, swing guards or security latches.

  • Latch Guard Installation

    Installing latch guards to protect against forced entry.

  • Door Latch Repair

    Fixing latches that do not catch, stick or fail to retract.

  • Door Hardware Repair

    Repairing the locks, latches, strikes, hinges and closers that make a door open, close and secure properly.

  • Door Viewer & Peephole Installation

    Installing peepholes or door viewers for added safety.

  • Door Reinforcement

    Adding security plates, reinforced strike plates, latch guards and door wrap plates.

  • Security Strike Plate Installation

    Installing stronger strike plates with longer screws for added protection.

  • Door Chain Installation

    Installing door chains or secondary security locks.

  • Door Lock Repair

    Repairing lock cylinders, latches, strikes and internal mechanisms.

  • Safe Locksmith

    Opening, repairing, servicing and changing combinations on home and business safes.

  • House Lockout

    Unlocking front doors, back doors, side doors, garage entry doors and interior doors, without damaging the lock whenever possible.

  • Master Key System

    Creating a key hierarchy where owners, managers and employees have different levels of access.

  • Lock Rekey

    Changing the internal pins of an existing lock so old keys no longer work. Ideal after moving in, tenant changes, lost keys or employee turnover.

  • Smart Lock Installation

    Installing smart locks, keypad locks, Wi-Fi locks, Bluetooth locks, app-controlled locks and keyless entry systems.

Strike Plate Adjustment near Torrance

We provide the same strike plate adjustment service in the communities around Torrance. See the main strike plate adjustment page or the full list of service areas.

Strike Plate Adjustment in Torrance: frequently asked questions

How do I know if my strike plate is misaligned?

Look for shiny rub marks on the plate above or below the opening, or a bolt that stops short. Those marks show exactly how far the plate needs to move.

How long does a door adjustment take?

Most single-door alignments and strike adjustments take 30 to 60 minutes. Reinforcement kits take a little longer.

Why does my door lock fine in summer but not winter?

Wood swells and shrinks with humidity, moving the bolt relative to the strike. A proper adjustment leaves clearance for that movement.

Why do I have to push my door to lock it in Torrance?

The bolt and the strike plate no longer line up, usually because the door has sagged on its hinges or the frame has moved. Realigning the door and resetting the strike fixes it.

Can door problems be fixed without replacing the lock?

Very often. Most latching and locking complaints are alignment issues, and the existing lock works properly once the door and strike are corrected.

Do you work on commercial doors as well?

Yes. We service aluminum storefront doors, hollow metal doors, pivots, continuous hinges, closers and exit devices.

Will the repair damage my door or paint?

We work carefully and keep changes within the existing hardware footprint wherever possible. Any new mortising is cut cleanly.

How can I make my door harder to kick in?

Install a reinforced strike plate with three-inch screws into the stud, a wrap-around plate at the lock, and long screws in the hinges. Together they resist the forces of a kick far better than standard hardware.

How long does it take a locksmith to reach me in Torrance?

It depends on where the nearest technician is and on traffic along I-405, I-110, or Pacific Coast Highway. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.

Can you make car keys in Torrance?

Yes. We cut and program car keys on site anywhere in Torrance, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.

Which parts of Torrance do you serve?

All of Torrance, including Old Torrance, the Hollywood Riviera, Walteria, and Southwood, and addresses in ZIP codes 90501, 90502, 90503, 90504, and 90505.

Do you only make car keys?

No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.

Do you check identification?

Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.

How do I get a price?

Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.

How can I contact you other than by phone?

You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.

Call Now (562) 550-7206Open 24 hours · mobile locksmith