Quick answer
Deadbolt Installation: Installing single-cylinder, double-cylinder, high-security or smart deadbolts. Big Daddy Car Key Replacement provides deadbolt installation service in Valencia as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Deadbolt Installation
- Area
- Valencia, Los Angeles County, CA (91354, 91355)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Residential Locksmith Services
- Phone
- (562) 550-7206
On this page
- About our deadbolt installation service
- Who we help in Valencia
- Signs you need deadbolt installation service
- Deadbolt Installation across Valencia
- Our deadbolt installation process, step by step
- Typical calls we receive
- What our technicians bring
- Terms worth knowing
- Cost factors for deadbolt installation service
- What you can expect from us
- Tips to avoid problems
- Why this is a job for a locksmith
- What we commit to
- How to choose a locksmith you can trust
- What to have ready when you call
- Aftercare and records
- Related locksmith services in Valencia
- Deadbolt Installation near Valencia
- Deadbolt Installation in Valencia: frequently asked questions
About our deadbolt installation service
Installing single-cylinder, double-cylinder, high-security or smart deadbolts. A deadbolt is the lock that actually resists force, because its bolt cannot be pushed back with a card or pried like a spring latch. We install single-cylinder deadbolts with an inside thumbturn, double-cylinder models where glass is near the lock, and keypad or smart versions, each with a reinforced strike anchored into the wall stud.

Homes change hands, tenants come and go, doors settle and locks wear. For deadbolt installation service in Valencia, we bring the workshop to your driveway: rekeying kits, deadbolts, locksets, strike plates and key machines. You get a clear recommendation, a price before work begins, and locks that are tested with you before we leave.
Who we help in Valencia
We work for homeowners, tenants, landlords, property managers, real estate agents and short-term rental hosts in Valencia. New buyers want every lock rekeyed before moving in, landlords need quick turnovers between tenants, families want one key for the whole house, and older residents often ask for hardware that is easier to operate. Each has slightly different priorities, and we tailor the recommendation accordingly.
This service is part of our residential locksmith services in Valencia.
Signs you need deadbolt installation service
People in Valencia usually call us for deadbolt installation service in situations like these:
- Your door only has a locking knob
- The existing deadbolt has a short or wobbly bolt
- There is glass within reach of the thumbturn
- You want keyless entry on the main door
Deadbolt Installation across Valencia
Valencia is a community within the city of Santa Clarita in Los Angeles County, part of the Santa Clarita Valley area we cover every day. Customers anywhere in Valencia, including Bridgeport, Northbridge, Valencia Summit, Westridge, Tesoro del Valle, and Valencia Northpark, can have a mobile technician sent directly to them. Service is available throughout ZIP codes 91354 and 91355.
Valencia is the planned heart of Santa Clarita, with paseo-linked neighborhoods, corporate parks and a regional mall, where HOA mailbox locks, smart deadbolts and commercial access control are frequent jobs.
If you are out and about near Six Flags Magic Mountain, Valencia Town Center, CalArts, College of the Canyons, or Henry Mayo Newhall Hospital, give us that location when you call and wait somewhere safe and visible. Technicians usually reach Valencia by I-5, SR-126, McBean Parkway, Valencia Boulevard, Magic Mountain Parkway, and Newhall Ranch Road. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
Our deadbolt installation process, step by step
A short phone consultation
Tell us what is happening and how many doors are involved. From that we can usually give a price range and suggest whether rekeying, repair or replacement fits best.
On-site inspection
The technician looks at each lock, the door, the frame and the strike plate. Problems blamed on a lock are often caused by a sagging door or a loose strike, and it pays to find that first.
Clear options and a firm price
You hear what can be repaired, what should be replaced and what is optional, with a price for each, before any work begins.
The work is done at your door
Cylinders are rekeyed, locks installed or repaired, strikes reinforced and keys cut in the van outside. Most homes are finished in under two hours.
Every lock is tested with you
You try each key in each lock with the door open and closed. Bolts should extend fully and turn with two fingers.
Keys and advice are handed over
You receive the new keys, and we note anything worth watching, such as a worn hinge or a door that will need adjusting when the weather changes.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Typical calls we receive
- An older parent is having trouble with a round knob and needs lever handles.
- The front door deadbolt has become stiff and now needs a shoulder against the door to lock.
- Each door in the house takes a different key and the ring keeps growing.
- A back door has only a locking knob, which can be slipped or forced in seconds.
- A handbag with house keys and a driver’s license was stolen from a car.
- A roommate, partner or tenant has moved out and still has a key.
- You have just closed on a house and have no idea how many keys the previous owners handed out.
What our technicians bring
Residential security in Southern California runs largely on two keyways, Kwikset KW1 and Schlage SC1, plus premium lines such as Baldwin, Emtek and Yale. Our vans carry rekeying pins for all of them, single- and double-cylinder deadbolts in common finishes, keyed entry knobs and levers, privacy and passage sets, latches, reinforced strike plates, door wrap plates and hinge screws. For higher security we install cylinders with hardened inserts and restricted keys.
Terms worth knowing
- Single and double cylinder
- A single-cylinder deadbolt has a key outside and a thumbturn inside; a double-cylinder model needs a key on both sides.
- Keyed alike
- Several locks set to operate with the same key.
- ANSI/BHMA grade
- A performance rating for locks: Grade 1 is the strongest and most durable, Grade 2 is solid residential quality, Grade 3 is basic.
- Backset
- The distance from the door edge to the center of the lock hole, normally 2⅜ or 2¾ inches.
- Rekeying
- Replacing the pins in a lock cylinder so a new key works and previous keys do not, without changing the hardware.
- Strike plate
- The metal plate on the door frame that the latch or bolt enters when the door is closed.
- Deadbolt
- A lock whose solid bolt is moved only by a key or thumbturn, so it cannot be pushed back like a spring latch.
- Keyway
- The shape of the slot a key slides into. Kwikset KW1 and Schlage SC1 are the most common in local homes.
Cost factors for deadbolt installation service
- Number of locks
- Rekeying and installation are priced per lock, with the service call covering the visit. Doing every door in one visit costs less per lock than separate trips.
- Rekey, repair or replace
- Rekeying is the least expensive, a repair usually sits in the middle, and new hardware costs the most. We recommend the cheapest option that solves the actual problem.
- Door preparation
- Fitting a lock to existing holes is quick. Boring a new door, enlarging old holes or repairing a damaged edge takes additional time.
- Scheduling
- Planned daytime appointments are typically priced lower than urgent late-night calls.
- Smart or electronic features
- Keypad and smart locks cost more than mechanical ones and take longer to set up, especially when the door needs aligning so the motor can throw the bolt.
- Condition of door and frame
- A split jamb, stripped hinge screws or a swollen door has to be corrected for a lock to work properly, and that adds labor.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Valencia. The technician confirms the figure before starting.
What you can expect from us
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.

Tips to avoid problems
- Use a dry graphite or PTFE lubricant in cylinders once a year. Avoid oil sprays, which collect grit.
- Have all compatible locks keyed alike. One key is easier to carry and easier to keep track of.
- Keep a record of who holds keys. When that list becomes uncertain, it is time to rekey.
- Add a secondary lock to sliding glass doors, and anti-lift blocks in the upper track.
- Do not hide a spare under a mat, a rock or a planter. Use a lock box or leave a key with a neighbor.
- Rekey as soon as you get the keys to a new home. Builders, agents, cleaners and previous owners may all have copies.
- If a key begins to stick, have it looked at. Sticking is the usual warning before a lock fails completely.
- Replace the short screws in strike plates and top hinges with three-inch screws that reach the wall framing.
Why this is a job for a locksmith
Installing or rekeying a lock looks simple in a video, and sometimes it is. The problems appear at the edges: a bolt that does not fully extend and therefore is not deadlocked, a strike held by half-inch screws, pins dropped during a rekey, a latch installed upside down. A locksmith does this work daily, carries the parts to correct what turns up, and leaves you with a door that has been tested under real conditions.
What we commit to
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
How to choose a locksmith you can trust
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Get an itemized receipt showing labor, parts and the business details.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
What to have ready when you call
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Aftercare and records
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Valencia
Customers who need deadbolt installation service often ask about these as well. Each can usually be handled in the same visit to Valencia.
- Sliding Door Lock Repair
Fixing sliding door lock mechanisms, handles, rollers, latches and alignment issues.
- Door Handle Lock Repair
Repairing broken, loose, jammed or malfunctioning door handles and lever locks.
- Lock Repair
Repairing locks that are sticky, jammed, loose, misaligned or difficult to operate.
- House Lockout
Unlocking front doors, back doors, side doors, garage entry doors and interior doors, without damaging the lock whenever possible.
- Emergency Home Lockout
Fast help when a homeowner or tenant is locked out of a house, apartment, condo or rental property.
- Condo Locksmith Service
Lock services for condo units, shared entries, storage rooms and garage access doors.
- Apartment Locksmith Service
Lockouts, rekeys, lock changes and key copies for apartments and rental units.
- Door Knob Lock Installation
Installing keyed door knobs, privacy knobs, passage knobs and interior locking hardware.
- Patio Door Lock Repair
Repairing or replacing sliding glass door locks, patio door latches and security bars.
- Apartment Lockout
Unlocking apartment unit doors for tenants who are locked out, day or night.
- Commercial Door Hardware
Supplying and installing commercial-grade levers, pulls, hinges, closers, exit devices, strikes and protective plates.
- Safe Locksmith
Opening, repairing, servicing and changing combinations on home and business safes.
- Commercial Locksmith
Lock, key, door hardware and access control service for offices, stores, restaurants, warehouses and multi-tenant buildings.
- Access Control Installation
Installing electronic access systems for offices, warehouses, apartment buildings and commercial facilities.
- High Security Locks
Locks engineered to resist picking, bumping, drilling and unauthorized key copying.
Deadbolt Installation near Valencia
We provide the same deadbolt installation service in the communities around Valencia. See the main deadbolt installation page or the full list of service areas.
- Deadbolt Installation in Stevenson Ranch
- Deadbolt Installation in Santa Clarita
- Deadbolt Installation in Porter Ranch
- Deadbolt Installation in Sylmar
- Deadbolt Installation in Granada Hills
- Deadbolt Installation in Chatsworth
- Deadbolt Installation in San Fernando
- Deadbolt Installation in Mission Hills
- Deadbolt Installation in Northridge
- Deadbolt Installation in North Hills
- Deadbolt Installation in Pacoima
- Deadbolt Installation in Winnetka
Deadbolt Installation in Valencia: frequently asked questions
Should I get a single or double cylinder deadbolt?
Single-cylinder deadbolts use a key outside and a thumbturn inside and suit most doors. Double-cylinder deadbolts need a key on both sides, which helps when glass is nearby but can slow an emergency exit, so check local code and keep a key close.
Can all my doors use the same key?
Yes, if the locks share a keyway or can be fitted with cylinders that do. Mixed brands can often be brought onto one key by swapping a cylinder or two.
How long does a typical residential job take?
A lockout takes minutes. Rekeying a house usually takes under an hour, and installing several new deadbolts one to two hours.
Do you need to see proof that I live here?
For lockouts and lock changes, yes. A photo ID with the address, a lease, a utility bill or closing documents are all acceptable.
Do you provide service for landlords and tenants?
Yes. We rekey between tenants, handle tenant lockouts with proper verification, and replace mailbox locks. Tenants should check their lease before changing locks.
Can you install locks I bought myself?
Yes. We install customer-supplied locks and check that they suit the door. If a lock is defective or the wrong size, we will tell you before fitting it.
What lock brands do you work with?
We service and install the common residential brands found in Southern California homes, including Schlage, Kwikset, Baldwin, Yale, Emtek and Weiser, along with high-security lines.
Should I rekey or replace the locks in my Valencia home?
Rekey when the locks are in good condition and you simply need old keys to stop working. Replace when locks are worn, damaged, low grade, or you want new features. We look at each lock and tell you which makes sense.
How long does it take a locksmith to reach me in Valencia?
It depends on where the nearest technician is and on traffic along I-5, SR-126, or McBean Parkway. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Is there a travel charge for Valencia?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Valencia, so you know the cost in advance.
Can you make car keys in Valencia?
Yes. We cut and program car keys on site anywhere in Valencia, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Which areas do you cover?
We serve communities across Los Angeles County and Ventura County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County and Ventura County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
