Quick answer
Smart Locks & Keyless Entry: Smart locks, keypad deadbolts and keyless entry systems supplied, installed and set up. Big Daddy Car Key Replacement provides smart locks & keyless entry service in Valley Glen as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Smart Locks & Keyless Entry
- Area
- Valley Glen, Los Angeles County, CA (91401, 91405, 91606)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Access Control & Electronic Lock Services
- Phone
- (562) 550-7206
On this page
- What smart locks & keyless entry means
- Who uses this service
- Reasons to call for smart locks & keyless entry service
- Smart Locks & Keyless Entry across Valley Glen
- How our smart locks & keyless entry service works
- Typical calls we receive
- What our technicians bring
- Trade terms explained
- Cost factors for smart locks & keyless entry service
- What you can expect from us
- Practical advice from our locksmiths
- Why this is a job for a locksmith
- How we work on every job
- How to choose a locksmith you can trust
- How to prepare for the visit
- After the visit
- Related locksmith services in Valley Glen
- Smart Locks & Keyless Entry near Valley Glen
- Smart Locks & Keyless Entry in Valley Glen: frequently asked questions
What smart locks & keyless entry means
Smart locks, keypad deadbolts and keyless entry systems supplied, installed and set up. Keyless entry replaces the key with a code, a phone, a fingerprint or a fob. For a home that can be one keypad deadbolt; for a business it can be a full access control system. We help you choose hardware that suits the door and how you live or work, install it properly and set up every user.

A smart lock or access system is only as good as its installation. The door must be aligned, the hardware matched to the opening, and the software configured with sensible codes and permissions. Our smart locks & keyless entry service in Valley Glen takes care of each part and shows you how to use it.
Who uses this service
Electronic lock and access control customers in Valley Glen range from households that want to stop hiding keys, to short-term rental hosts issuing guest codes, to offices, clinics, gyms, apartment buildings and warehouses that need to control and record who enters.
Our full list of locksmith services shows everything we offer, and the Valley Glen locksmith page covers local details.
Reasons to call for smart locks & keyless entry service
If any of the following sounds familiar, smart locks & keyless entry service is likely what you need:
- You are tired of carrying or hiding keys
- Family, guests or staff need their own access
- You want to lock or check the door from your phone
- You run a rental and change codes often
Smart Locks & Keyless Entry across Valley Glen
Located in Los Angeles County, Valley Glen is a neighborhood of the City of Los Angeles within our San Fernando Valley service area. We cover every part of Valley Glen, including the Valley College area, the Oxnard Street corridor, and the Fulton Avenue corridor. Wherever you are in town, the technician comes to your door, driveway or parking space. That includes addresses in ZIP codes 91401, 91405, and 91606.
Valley Glen is a residential pocket of 1940s and 1950s homes and student-friendly apartments around Valley College, where rekeys after roommate changes and budget-friendly spare car keys are common.
People call us from all over Valley Glen, including the areas around Los Angeles Valley College, the Great Wall of Los Angeles mural, Valley Glen Community Park, and the Tujunga Wash greenway. A landmark or cross street helps the technician reach you quickly. Technicians usually reach Valley Glen by SR-170, Victory Boulevard, Burbank Boulevard, Oxnard Street, Fulton Avenue, and Coldwater Canyon Avenue. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
How our smart locks & keyless entry service works
Discuss how the door is used
Who needs access, how often people change, whether remote control or an entry log is needed, and what the door is made of all shape the right choice.
Check the door and the site
We measure door thickness, backset and bore, check alignment and weather exposure, and for networked products test Wi-Fi strength at the door or plan the wiring.
Recommend equipment
You get a recommendation with the trade-offs explained: keypad or app, Bluetooth or Wi-Fi, standalone or networked, and the cost of each.
Install the hardware
The door is aligned so the bolt moves freely, then the lock, reader, strike or maglock is fitted to the manufacturer’s template and wired or powered.
Program users and settings
Default codes are removed, individual users are created, schedules and auto-lock are set, and firmware is updated.
Train and document
We walk you through adding and deleting users, changing batteries and using the mechanical override, and leave the settings documented.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Typical calls we receive
- A short-term rental needs a new code for every guest.
- An office wants to stop rekeying each time an employee leaves.
- A business needs to know who entered the stockroom and when.
- A homeowner wants to let a contractor in while at work.
- An apartment building wants to replace a shared entry key with fobs.
- A smart lock reports "jammed" every evening when the door swells.
- Children get home from school before their parents and keep losing keys.
What our technicians bring
We install and service keypad and smart deadbolts and levers from the major residential makers such as Schlage, Yale, Kwikset and August, and commercial electronic locks and access components including standalone keypad levers, card and fob readers, controllers, electric strikes, electromagnetic locks, request-to-exit sensors, push-to-exit buttons, power supplies with battery backup and door position switches. Matching each component to the door is what makes a system reliable.
Trade terms explained
- Fail-safe and fail-secure
- A fail-safe lock unlocks when power is lost; a fail-secure lock stays locked.
- Credential
- Whatever identifies a user: a card, fob, PIN, phone or fingerprint.
- Electric strike
- A strike plate with a keeper that releases electrically so a locked door can be pushed open.
- Audit trail
- A stored record of which credential opened a door and when.
- Access control
- A system that decides who may pass through which door at what time, and records each entry.
- Maglock
- An electromagnetic lock that holds a door closed with a magnet and releases when power is cut.
- Request to exit
- A sensor or button that releases an electrically locked door for someone leaving.
- Smart lock
- A lock that can be operated by a code, phone or other credential, often with remote control.
Cost factors for smart locks & keyless entry service
- Software and credentials
- Cloud subscriptions, cards and fobs are ongoing or per-user costs worth understanding at the start.
- Life-safety requirements
- Maglocks and controlled exits need release devices and sometimes fire alarm connections to meet code.
- Type of system
- A standalone keypad lock is the least expensive. Smart locks cost more, and wired access control with readers and controllers the most.
- Wiring and power
- Running cable, adding power supplies and battery backup takes time, especially in finished buildings.
- Grade of hardware
- Commercial Grade 1 electronic locks cost more than residential models and are built for far heavier use.
- Number of doors
- Each controlled door needs its own lock hardware and, for wired systems, cabling back to a controller.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
What you can expect from us
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.

Practical advice from our locksmiths
- Turn on two-factor authentication for any account that can unlock your door.
- Keep the mechanical override key somewhere accessible outside the locked area.
- Wipe touchscreens occasionally so smudges do not reveal the digits in your code.
- Avoid obvious codes such as birth years, addresses or repeated digits.
- Keep firmware up to date. Updates often fix security issues.
- Delete factory default codes on the day of installation.
- Give each person their own code or credential so access can be removed individually.
- Check that the door closes and latches on its own. Auto-lock cannot secure a door that is ajar.
Why this is a job for a locksmith
Most complaints about electronic locks trace back to installation: a door out of alignment, a strike that pinches the bolt, a Wi-Fi bridge out of range, default codes left active, or a maglock installed without the release devices the code requires. A locksmith addresses the mechanical side first, then the electronics, and leaves a system that works every day and still lets people out safely when power is lost.
How we work on every job
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
How to choose a locksmith you can trust
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Get an itemized receipt showing labor, parts and the business details.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
How to prepare for the visit
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
After the visit
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Valley Glen
Customers who need smart locks & keyless entry service often ask about these as well. Each can usually be handled in the same visit to Valley Glen.
- Keypad Access Control
Installing keypad entry systems for offices and commercial buildings.
- User Access Management
Setting up different codes for employees, tenants, contractors, family members or guests.
- Electronic Lock Installation
Installing electronic locks for homes and businesses.
- Keypad Lock Installation
Installing keypad deadbolts, digital door locks and electronic entry locks.
- Commercial Smart Lock Installation
Installing electronic and app-controlled locks for businesses.
- Commercial Access Control Maintenance
Servicing card readers, fobs, electric strikes, maglocks and controllers.
- Bluetooth Lock Installation
Installing Bluetooth-enabled locks.
- Digital Lock Repair
Repairing malfunctioning electronic locks.
- Electric Strike Installation
Installing electric strikes for buzz-in entry systems.
- Magnetic Lock Installation
Installing maglocks for controlled entry doors.
- Ignition Repair
Repairing ignition cylinders that are stuck, worn or will not turn.
- Lock Rekey
Changing the internal pins of an existing lock so old keys no longer work. Ideal after moving in, tenant changes, lost keys or employee turnover.
- Key Duplication
Making spare keys for house doors, gates, mailboxes, padlocks, cabinets and more.
- Commercial Door Hardware
Supplying and installing commercial-grade levers, pulls, hinges, closers, exit devices, strikes and protective plates.
- Storefront Lock Repair
Repairing locks on glass storefront doors, aluminum doors and commercial entryways.
Smart Locks & Keyless Entry near Valley Glen
We provide the same smart locks & keyless entry service in the communities around Valley Glen. See the main smart locks & keyless entry page or the full list of service areas.
- Smart Locks & Keyless Entry in Van Nuys
- Smart Locks & Keyless Entry in Valley Village
- Smart Locks & Keyless Entry in North Hollywood
- Smart Locks & Keyless Entry in Panorama City
- Smart Locks & Keyless Entry in Sherman Oaks
- Smart Locks & Keyless Entry in Arleta
- Smart Locks & Keyless Entry in Sun Valley
- Smart Locks & Keyless Entry in Studio City
- Smart Locks & Keyless Entry in Lake Balboa
- Smart Locks & Keyless Entry in North Hills
- Smart Locks & Keyless Entry in Toluca Lake
- Smart Locks & Keyless Entry in Encino
Smart Locks & Keyless Entry in Valley Glen: frequently asked questions
Are smart locks as secure as regular deadbolts?
A quality smart lock is a Grade 1 or 2 deadbolt with electronics added, so its physical strength is comparable. Security then depends on strong codes, updated firmware and, as with any lock, a reinforced strike.
Can smart locks be hacked?
Reputable brands use strong encryption, and real-world break-ins overwhelmingly involve force, not hacking. Strong passwords, two-factor authentication and updated firmware keep the risk low.
Can you install a lock I already bought?
Yes. We install customer-supplied locks, correct the door alignment they depend on, and complete the app setup.
Can access be limited to certain days and times?
Yes. Most smart locks and all access control systems support schedules, temporary codes and automatic expiry.
How many users can an electronic lock hold?
Residential keypad locks typically hold from a couple of dozen to a few hundred codes. Commercial systems manage thousands of users.
Do I need Wi-Fi for a keypad lock?
No. A standalone keypad lock works with no network at all. Wi-Fi is needed only for remote control and notifications.
Will an electronic lock work on my existing door?
Most standard doors accept them. Very thick, thin, glass or metal doors need specific models, which we identify during the site check.
Which smart lock is best for a home in Valley Glen?
It depends on the door and how you want to use it. A keypad deadbolt suits most households. Add Wi-Fi if you need remote control, or choose Bluetooth for longer battery life. We recommend models after seeing the door.
Are you open 24 hours in Valley Glen?
Yes. We take calls and dispatch to Valley Glen 24 hours a day, including weekends and holidays.
Is there a travel charge for Valley Glen?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Valley Glen, so you know the cost in advance.
Can you make car keys in Valley Glen?
Yes. We cut and program car keys on site anywhere in Valley Glen, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
Which areas do you cover?
We serve communities across Los Angeles County and Ventura County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
