Quick answer
Exit Device Repair: Fixing commercial exit devices, dogging mechanisms, latches, rods and trim. Big Daddy Car Key Replacement provides exit device repair service in Van Nuys as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Exit Device Repair
- Area
- Van Nuys, Los Angeles County, CA (91401, 91405, 91406, 91411)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Commercial Locksmith Services
- Phone
- (562) 550-7206
On this page
- About our exit device repair service
- Who uses this service
- When you need exit device repair service
- Exit Device Repair across Van Nuys
- What happens when you call
- Common situations in Van Nuys
- Tools, parts and hardware we carry
- Trade terms explained
- How exit device repair service is priced
- Why Van Nuys customers choose Big Daddy
- Practical advice from our locksmiths
- Why this is a job for a locksmith
- How we work on every job
- How to choose a locksmith you can trust
- What to have ready when you call
- After the visit
- Related locksmith services in Van Nuys
- Exit Device Repair near Van Nuys
- Exit Device Repair in Van Nuys: frequently asked questions
About our exit device repair service
Fixing commercial exit devices, dogging mechanisms, latches, rods and trim. Exit devices have many moving parts: touchpads, latchbolts, top and bottom rods, dogging cylinders and outside lever trim. Vertical rods go out of adjustment as doors sag, and bottom latches clog with debris. We adjust rods, replace worn latches and trim, and convert troublesome bottom rods to less-bottom-rod setups where permitted.

Every business in Van Nuys eventually faces the same questions. Who has keys? Do the exit doors work? Would the back door survive a pry bar? Our exit device repair service gives practical answers and carries out the work, usually in a single visit and with as little disruption as possible.
Who uses this service
Our commercial customers in Van Nuys include retail shops, restaurants, offices, medical and dental practices, warehouses, schools, places of worship, property management companies and homeowners associations. Some need a one-time rekey after a staffing change, others an ongoing arrangement covering key systems, exit hardware and door maintenance across several sites.
This service is part of our commercial locksmith services in Van Nuys.
When you need exit device repair service
People in Van Nuys usually call us for exit device repair service in situations like these:
- Top or bottom rods do not engage
- The outside lever no longer opens the door
- The dogging key will not hold the bar down
- The device rattles or the end cap is missing
Exit Device Repair across Van Nuys
Located in Los Angeles County, Van Nuys is a neighborhood of the City of Los Angeles within our San Fernando Valley service area. Our exit device repair service reaches all of Van Nuys, including the Van Nuys Civic Center, the Van Nuys Boulevard auto row, the Sepulveda corridor, and the Van Nuys Airport business district, as well as the streets in between. You do not need to bring anything to a shop. Service is available throughout ZIP codes 91401, 91405, 91406, and 91411.
Van Nuys is the civic and commercial heart of the Valley, with 1940s bungalows, dense apartment corridors, auto dealerships and airport-area warehouses generating every kind of locksmith call.
Whether you are at home, at work, or stuck near the Van Nuys Civic Center, Van Nuys Airport, the Van Nuys Courthouse, or the Metro G Line busway, tell the dispatcher the nearest landmark and we will find you. Van Nuys is served by I-405, US-101, Van Nuys Boulevard, Sepulveda Boulevard, Victory Boulevard, and Sherman Way, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
What happens when you call
Discuss the need and the site
We ask about the type of business, the doors involved and any deadline, such as an inspection, a tenant move-in or a termination. Photos of the doors help us arrive with the right parts.
Verify authority
Work on a commercial property is done for the owner, the tenant of record, or the property manager. We confirm that before any lock is opened or changed.
Survey the openings
Each door is checked for lock type and function, closer, hinges or pivots, exit hardware and fire rating, so the solution fits both the security need and the code.
Agree scope and price
You receive a clear scope: which doors, what hardware, how many keys, and the cost. For key systems we draft the hierarchy for your approval first.
Carry out the work around your schedule
Rekeys, repairs and installations are done before opening, after closing or during quiet hours when that suits the business better.
Test, document and hand over
Every door is tested for locking, latching and free exit. Keys are stamped and counted, and for master systems you receive a record of what opens what.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Common situations in Van Nuys
- A closer has failed and the front door slams hard enough to rattle the glass.
- The storefront door will not latch and the shop cannot be left for the night.
- A fire inspection notes that the rear exit has a slide bolt and no panic hardware.
- The back door shows pry marks around the latch after the weekend.
- You are taking over a suite and need the previous tenant’s keys cut off before move-in.
- A manager is let go and returns only some of the keys issued.
- Staff need access to the sales floor but not the office, stockroom or IT closet.
Tools, parts and hardware we carry
Commercial doors use purpose-built hardware. Aluminum storefronts typically carry Adams Rite-style deadlatches and hook bolts driven by a mortise cylinder. Hollow metal and wood doors use Grade 1 cylindrical levers or mortise locks from makers such as Schlage, Sargent, Corbin Russwin and Yale. Exits use panic and fire exit devices, and closers from LCN, Norton and similar makers control the swing. Interchangeable cores allow fast rekeying. We stock the common cylinders, cams, tailpieces, lock bodies and closers.
Trade terms explained
- Cylindrical lock
- A lock installed through a round bore in the door, with the mechanism in the lever or knob assembly.
- Interchangeable core
- A removable lock core that a control key releases, allowing a door to be rekeyed in seconds.
- Exit device
- Panic or fire exit hardware that unlatches a door when the horizontal bar is pushed.
- Master key system
- A planned arrangement in which each lock has its own key and a master key opens all of them.
- Lock function
- How a lock behaves, such as entry, storeroom, classroom or passage, which determines when it is locked and who can lock it.
- Mortise lock
- A heavy-duty lock housed in a pocket cut into the door edge, combining latch and deadbolt in one case.
- Door closer
- A hydraulic device that closes a door at a controlled speed and holds it latched.
- Restricted keyway
- A key profile whose blanks are supplied only to authorized locksmiths, preventing unauthorized copies.
How exit device repair service is priced
- Restricted or high-security keys
- Patented keyways and high-security cylinders cost more per cylinder and per key, in exchange for real control over duplication.
- Hardware grade and function
- Grade 1 mortise locks and exit devices cost more than cylindrical levers, and they last far longer on busy doors.
- Code and fire-rating requirements
- Fire-rated openings need listed hardware, and exits may need panic devices. Compliance can dictate the product.
- After-hours scheduling
- Work outside normal hours avoids disruption and may be priced differently. We quote both where it matters.
- Electrified hardware
- Doors tied to access control, electric strikes or maglocks need wiring and coordination that add time.
- Number and type of doors
- Aluminum storefront doors, hollow metal doors and wood office doors use different hardware. Pricing reflects how many openings are involved and what each requires.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
Why Van Nuys customers choose Big Daddy
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Van Nuys.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.

Practical advice from our locksmiths
- Never chain, padlock or bolt a required exit door while the building is occupied.
- Store spare keys in a locked key cabinet, not a desk drawer.
- Give each employee access only to the doors their job requires.
- Use a restricted keyway if staff copying keys is a concern. A "Do Not Duplicate" stamp alone does not prevent copies.
- Keep a written key log: who holds which key, and the date it was issued and returned.
- Have storefront pivots and closers serviced before the door starts dragging. It is cheaper than replacing a damaged lock.
- Consider keypad or card access for doors with frequent staff turnover.
- Test exit devices and door closers monthly. A door that does not latch is an unlocked door.
Why this is a job for a locksmith
Commercial doors are regulated in ways that homes are not. The wrong lock function can trap someone inside a storeroom, a deadbolt on an exit can fail an inspection or cost a life, and unlisted hardware can void a fire door’s rating. A commercial locksmith knows the functions, the grades and the applicable codes, keeps your key system mathematically sound, and documents the work so the next change is straightforward.
How we work on every job
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
How to choose a locksmith you can trust
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Get an itemized receipt showing labor, parts and the business details.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
What to have ready when you call
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
After the visit
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Van Nuys
Customers who need exit device repair service often ask about these as well. Each can usually be handled in the same visit to Van Nuys.
- Business Lockout
Unlocking offices, storefronts, warehouses, restaurants, retail stores and commercial buildings.
- Mortise Lock Repair
Repairing or replacing worn, jammed or damaged mortise lock systems.
- Apartment Building Locksmith
Common area locks, unit rekeys, mailbox locks, access control, gate locks and emergency exit hardware.
- Grand Master Key Systems
Advanced access control where one top-level key opens multiple buildings or departments.
- Door Closer Repair
Adjusting or repairing doors that slam, close too slowly, do not latch or stay open.
- Commercial Door Hardware Repair
Repairing commercial handles, hinges, closers, locks, latches, strikes, pivots and door frames.
- IC Core Lock Systems
Installing and rekeying interchangeable core lock systems for commercial properties.
- File Cabinet Lock Replacement
Replacing locks on filing cabinets, desks and office storage.
- Commercial Lock Rekeying
Rekeying locks after employee turnover, lost keys, tenant changes or security concerns.
- Automatic Door Closer Adjustment
Adjusting speed, latch, sweep and backcheck settings.
- Car Lockout
Unlocking vehicles when keys are locked inside.
- High Security Locks
Locks engineered to resist picking, bumping, drilling and unauthorized key copying.
- Rekey Locks
Resetting your existing locks to a new key so previous keys stop working, without replacing the hardware.
- Change Locks
Swapping out the locks on your doors for new ones, with new keys, in one visit.
- Safe Locksmith
Opening, repairing, servicing and changing combinations on home and business safes.
Exit Device Repair near Van Nuys
We provide the same exit device repair service in the communities around Van Nuys. See the main exit device repair page or the full list of service areas.
- Exit Device Repair in Valley Glen
- Exit Device Repair in Panorama City
- Exit Device Repair in Sherman Oaks
- Exit Device Repair in Lake Balboa
- Exit Device Repair in Encino
- Exit Device Repair in Valley Village
- Exit Device Repair in North Hills
- Exit Device Repair in Arleta
- Exit Device Repair in North Hollywood
- Exit Device Repair in Mission Hills
- Exit Device Repair in Reseda
- Exit Device Repair in Sun Valley
Exit Device Repair in Van Nuys: frequently asked questions
Can vertical rod exit devices be adjusted?
Yes. Rod length and latch engagement are adjustable, and most problems come from sagging doors pulling the rods out of range. We realign the door first and then set the rods so both latches engage fully.
Who is allowed to authorize lock changes for a business?
The owner, the tenant named on the lease, or the property manager. We verify authority before changing or opening any commercial lock.
How long does it take to rekey a business?
A small shop or office with a handful of doors usually takes about an hour. Larger sites and master key systems are scheduled by scope.
How do we stop employees from copying keys?
Install a restricted key system. Its blanks are available only through the authorized locksmith and copies are cut only for people on your signature list.
Do you offer ongoing service for multiple locations?
Yes. We service multi-site businesses and managed properties across our service area and keep key records so later changes are fast.
Can you work outside our business hours in Van Nuys?
Yes. We are open 24 hours and regularly schedule rekeys, repairs and installations before opening or after closing so customers and staff are not disturbed.
What brands of commercial hardware do you service?
We work with the major commercial lines, including Schlage, Sargent, Corbin Russwin, Yale, Best, Adams Rite, Von Duprin, LCN, Norton and Kaba, and can match most existing hardware.
Can you provide documentation for our records?
Yes. For rekeys and key systems we provide a key schedule listing doors, key numbers and the quantity of keys issued.
Can you make car keys in Van Nuys?
Yes. We cut and program car keys on site anywhere in Van Nuys, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Which parts of Van Nuys do you serve?
All of Van Nuys, including the Van Nuys Civic Center, the Van Nuys Boulevard auto row, the Sepulveda corridor, and the Van Nuys Airport business district, and addresses in ZIP codes 91401, 91405, 91406, and 91411.
How long does it take a locksmith to reach me in Van Nuys?
It depends on where the nearest technician is and on traffic along I-405, US-101, or Van Nuys Boulevard. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
Which areas do you cover?
We serve communities across Los Angeles County and Ventura County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
