Quick answer
Big Daddy Car Key Replacement cuts and programs Chevrolet Corvette keys on site in Walnut, CA, 24 hours a day, including transponder keys, remote head keys and smart keys where the vehicle uses them. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- Chevrolet Corvette
- Model years covered
- 1990–present
- Service area
- Walnut, CA
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your vehicle
- Phone
- (562) 550-7206
On this page
- Chevrolet Corvette keys made and programmed on site
- Chevrolet Corvette key types by model year
- Choose your Chevrolet Corvette year
- Types of Chevrolet Corvette keys
- How Chevrolet key and immobilizer systems work
- Common Chevrolet key and lock problems
- All keys lost or just need a spare?
- Stranded with your Chevrolet right now?
- Chevrolet Corvette key replacement across Walnut
- Getting a Chevrolet Corvette key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Chevrolet key?
- What affects the cost of a Chevrolet Corvette key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers in Walnut choose Big Daddy
- Looking after your Chevrolet key
- Choosing a car locksmith you can trust
- Other Chevrolet models
- Related automotive locksmith services in Walnut
- Chevrolet Corvette keys near Walnut
- Chevrolet Corvette key replacement in Walnut: frequently asked questions
Chevrolet Corvette keys made and programmed on site
The Chevrolet Corvette was sold in the United States for model years 1990–present, and its key technology changed along the way. We make keys for every one of those years in Walnut: cut to factory code, programmed to the immobilizer where the car has one, and tested before we leave. Chevrolet key technology varies widely by model: full-size trucks and SUVs used Passlock without a chip until 2007, while cars like the Impala had transponders from 2000. Since 2010 most Chevrolets use laser-cut flip keys or proximity fobs.

Chevrolet Corvette key types by model year
The table shows the key most Chevrolet Corvette models left the factory with in each period. Trim levels and options vary, so we always confirm against your vehicle and VIN.
| Model years | Typical key | Transponder chip | Blade |
|---|---|---|---|
| 1990–2004 | Traditional metal key | No | Edge-cut |
| 2005–2026 | Smart proximity key | Yes | Laser-cut |
Choose your Chevrolet Corvette year
Select a model year for the exact key type, programming method and what to expect.
- 2026 Chevrolet Corvette
- 2025 Chevrolet Corvette
- 2024 Chevrolet Corvette
- 2023 Chevrolet Corvette
- 2022 Chevrolet Corvette
- 2021 Chevrolet Corvette
- 2020 Chevrolet Corvette
- 2019 Chevrolet Corvette
- 2018 Chevrolet Corvette
- 2017 Chevrolet Corvette
- 2016 Chevrolet Corvette
- 2015 Chevrolet Corvette
- 2014 Chevrolet Corvette
- 2013 Chevrolet Corvette
- 2012 Chevrolet Corvette
- 2011 Chevrolet Corvette
- 2010 Chevrolet Corvette
- 2009 Chevrolet Corvette
- 2008 Chevrolet Corvette
- 2007 Chevrolet Corvette
- 2006 Chevrolet Corvette
- 2005 Chevrolet Corvette
- 2004 Chevrolet Corvette
- 2003 Chevrolet Corvette
- 2002 Chevrolet Corvette
- 2001 Chevrolet Corvette
- 2000 Chevrolet Corvette
- 1999 Chevrolet Corvette
- 1998 Chevrolet Corvette
- 1997 Chevrolet Corvette
- 1996 Chevrolet Corvette
- 1995 Chevrolet Corvette
- 1994 Chevrolet Corvette
- 1993 Chevrolet Corvette
- 1992 Chevrolet Corvette
- 1991 Chevrolet Corvette
- 1990 Chevrolet Corvette
Types of Chevrolet Corvette keys
Smart proximity key
A smart key never needs to leave your pocket. Antennas in the doors and cabin detect it, the doors unlock when you touch the handle, and the engine starts with a button once the car confirms the key is inside. The key and car exchange encrypted, constantly changing codes. A small metal emergency blade hides inside the fob for the door lock when the fob battery is flat. For the Chevrolet Corvette we supply a fob with the exact part number and frequency for the car’s system generation, cut the emergency blade, and program the fob through the diagnostic port using the security access the manufacturer requires. On many vehicles all keys are registered in one session, so bring every key you want to keep.
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy. For the Chevrolet Corvette we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank.
How Chevrolet key and immobilizer systems work
General Motors has used several anti-theft systems over the years. PASS-Key (VATS) keys from the late 1980s through the 1990s carry a visible resistor pellet that must match one of fifteen values. Passlock, common on trucks and compacts into the 2000s, uses a sensor in the ignition cylinder and an ordinary key. PASS-Key III and III+ use a transponder chip, and from about 2010 GM moved to laser-cut flip keys and then proximity fobs programmed through secured access.
Common Chevrolet key and lock problems
These are the issues we see most often on Chevrolet vehicles in Walnut:
- Passlock faults that leave a security light flashing and the engine disabled for ten minutes at a time
- Worn ignition cylinders on trucks and SUVs that will not turn or will not release the key
- Flip-key blades that loosen or snap at the hinge
- Proximity fobs that stop being detected after a battery or module replacement
All keys lost or just need a spare?
How many keys you still have matters more than almost anything else. With one working key present, a second key can usually be copied or added in a short visit. With no keys at all, the technician must first work out the correct cuts, from the VIN or by decoding a lock, and then gain security access to the immobilizer so a new key can be registered. That all-keys-lost process is routine for us and is done on site, but it takes more time. If you are down to your last key, adding a spare today is far cheaper than replacing every key later.
Stranded with your Chevrolet right now?
Stuck without a working key? First make sure you are somewhere safe and visible. Think about whether a spare exists at home or with a family member. Then call (562) 550-7206 and give us the year, make, model, your location and whether the vehicle is locked or open. We will tell you the likely cost and how long a technician will take to reach you. For a child or pet locked inside, call 911 before anything else.
Chevrolet Corvette key replacement across Walnut
Walnut is an incorporated city in Los Angeles County, part of the San Gabriel Valley area we cover every day. We cover every part of Walnut, including Snow Creek, Timberline, Walnut Ridge, the Valley Boulevard corridor, and the Mt. SAC area. Wherever you are in town, the technician comes to your door, driveway or parking space. We serve the 91789 ZIP code.
Walnut is an upscale hillside suburb with a large community college, where newer homes get smart-lock and high-security upgrades and college commuters need quick car lockout and key service.
If you are out and about near Mt. San Antonio College, Walnut Ranch Park, Suzanne Park, Snow Creek Park, or Creekside Park, give us that location when you call and wait somewhere safe and visible. Technicians usually reach Walnut by SR-57, SR-60, I-10, Valley Boulevard, Grand Avenue, and Lemon Avenue. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
Getting a Chevrolet Corvette key made, step by step
Call with the year, make and model
Tell us you need a key for a Chevrolet Corvette, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Chevrolet key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a Chevrolet Corvette key
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
Whoever finds a lost key might find the car. During programming we can usually remove lost keys from the vehicle’s memory, which stops them starting the engine. That does not change the mechanical door lock, so if theft is a concern, the door cylinders can be rekeyed to a new cut as well.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
- All keys lost
- A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
Situations we are called to most often
- The key fob went through the washing machine.
- The only key to the car is lost somewhere between the beach, the restaurant and home.
- The ignition will not turn and the key will not come out.
- The dash reads "key not detected" and the start button does nothing.
- The key is locked in the trunk and the trunk release is disabled.
Why drivers in Walnut choose Big Daddy
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Walnut.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.

Looking after your Chevrolet key
- When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
- Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
- Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
- Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
- Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
Choosing a car locksmith you can trust
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Get an itemized receipt showing labor, parts and the business details.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
Other Chevrolet models
- Chevrolet Suburban keys
- Chevrolet Tahoe keys
- Chevrolet Express keys
- Chevrolet Malibu keys
- Chevrolet Camaro keys
- Chevrolet Silverado 1500 keys
- Chevrolet Silverado 2500HD keys
- Chevrolet Blazer keys
- Chevrolet Impala keys
- Chevrolet Equinox keys
- Chevrolet Colorado keys
- Chevrolet Traverse keys
- Chevrolet Astro keys
Related automotive locksmith services in Walnut
- Emergency Vehicle Lockout
Fast unlocking for cars, trucks, SUVs, vans and work vehicles.
- Key Fob Replacement
Replacing remote key fobs for cars, trucks, SUVs and vans.
- Laser Cut Key
Cutting high-security sidewinder/laser-cut keys.
- Trunk Lockout Service
Opening locked trunks when keys are lost or locked inside.
- Key Fob Programming
Programming new or replacement key fobs.
- Boat Key Replacement
Replacing keys for boat ignitions, compartments and storage locks.
- Push-to-Start Key Programming
Programming proximity keys for push-button ignition vehicles.
- Semi-Truck Locksmith
Lockouts, key replacement, ignition repair and fleet key services for commercial trucks.
Chevrolet Corvette keys near Walnut
We make Chevrolet Corvette keys in the communities around Walnut as well. See the main Chevrolet Corvette key replacement page or the Walnut locksmith page.
- Chevrolet Corvette keys in Diamond Bar
- Chevrolet Corvette keys in Rowland Heights
- Chevrolet Corvette keys in La Puente
- Chevrolet Corvette keys in Covina
- Chevrolet Corvette keys in City of Industry
- Chevrolet Corvette keys in West Covina
- Chevrolet Corvette keys in Hacienda Heights
- Chevrolet Corvette keys in La Habra Heights
- Chevrolet Corvette keys in San Dimas
- Chevrolet Corvette keys in Pomona
- Chevrolet Corvette keys in Baldwin Park
- Chevrolet Corvette keys in Irwindale
Chevrolet Corvette key replacement in Walnut: frequently asked questions
Why is the security light flashing on my Chevrolet and the engine will not start?
The anti-theft system does not recognize the key or the ignition sensor signal. It may be a worn key, a failed Passlock sensor or an unprogrammed chip. We diagnose which and correct it; a relearn procedure is often part of the fix.
Can a Chevrolet key be programmed without going to the dealer?
Yes for the great majority of models. Older systems use an on-board relearn and newer ones need a diagnostic tool with security access, which we carry.
Will my lost Chevrolet Corvette key still start the car?
For chip and smart keys we can usually erase lost keys from the car’s memory during programming, so they no longer start the engine. A lost key could still open the door mechanically unless the locks are rekeyed.
Do I have to tow my Chevrolet Corvette to you?
No. We are a mobile service. The key machines and programming equipment are in the van, and the work is done where the vehicle is parked.
Does car insurance cover a replacement Chevrolet key?
Some comprehensive policies, roadside plans and dealer key-protection plans do. Check your policy; we provide an itemized receipt you can submit.
Do you also repair the ignition on a Chevrolet Corvette?
Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.
What do you need from me to make a Chevrolet Corvette key?
A photo ID and proof that the vehicle is yours, such as registration, title or insurance, plus access to the vehicle. Having the VIN ready when you call speeds things up.
Can you unlock my Chevrolet Corvette if the keys are inside?
Yes. We open vehicles without damage using air wedges and reach tools or by picking the door lock, at any hour.
How much does a Chevrolet Corvette key cost?
It depends on the key type for your exact trim and on whether you still have a working key. Call (562) 550-7206 with the year, make and model and we will give you a price range before sending anyone.
Is there a travel charge for Walnut?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Walnut, so you know the cost in advance.
Can you make car keys in Walnut?
Yes. We cut and program car keys on site anywhere in Walnut, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Which areas do you cover?
We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
