Quick answer
Big Daddy Car Key Replacement cuts and programs Isuzu Amigo keys on site in Walnut, CA, 24 hours a day, including transponder keys, remote head keys and smart keys where the vehicle uses them. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- Isuzu Amigo
- Model years covered
- 1990–2000
- Service area
- Walnut, CA
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your vehicle
- Phone
- (562) 550-7206
On this page
- Isuzu Amigo keys made and programmed on site
- Isuzu Amigo key types by model year
- Choose your Isuzu Amigo year
- Types of Isuzu Amigo keys
- How Isuzu key and immobilizer systems work
- Common Isuzu key and lock problems
- All keys lost or just need a spare?
- Stranded with your Isuzu right now?
- Isuzu Amigo key replacement across Walnut
- Getting a Isuzu Amigo key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Isuzu key?
- What affects the cost of a Isuzu Amigo key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers in Walnut choose Big Daddy
- Looking after your Isuzu key
- Choosing a car locksmith you can trust
- Other Isuzu models
- Related automotive locksmith services in Walnut
- Isuzu Amigo keys near Walnut
- Isuzu Amigo key replacement in Walnut: frequently asked questions
Isuzu Amigo keys made and programmed on site
The Isuzu Amigo was sold in the United States for model years 1990–2000, and its key technology changed along the way. We make keys for every one of those years in Walnut: cut to factory code, programmed to the immobilizer where the car has one, and tested before we leave. Isuzu passenger vehicles sold in the U.S. mostly used straightforward mechanical keys, and the later Ascender and i-Series shared GM’s Passlock system. Isuzu commercial trucks remain common on local roads and use simple keys cut by code.

Isuzu Amigo key types by model year
The table shows the key most Isuzu Amigo models left the factory with in each period. Trim levels and options vary, so we always confirm against your vehicle and VIN.
| Model years | Typical key | Transponder chip | Blade |
|---|---|---|---|
| 1990–2000 | Traditional metal key | No | Edge-cut |
Choose your Isuzu Amigo year
Select a model year for the exact key type, programming method and what to expect.
- 2000 Isuzu Amigo
- 1999 Isuzu Amigo
- 1998 Isuzu Amigo
- 1997 Isuzu Amigo
- 1996 Isuzu Amigo
- 1995 Isuzu Amigo
- 1994 Isuzu Amigo
- 1993 Isuzu Amigo
- 1992 Isuzu Amigo
- 1991 Isuzu Amigo
- 1990 Isuzu Amigo
Types of Isuzu Amigo keys
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy. For the Isuzu Amigo we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank.
How Isuzu key and immobilizer systems work
Most Isuzu passenger vehicles sold in the United States use mechanical keys without a transponder, and the General Motors-built Ascender and i-Series trucks use GM’s Passlock system. Isuzu N-Series commercial trucks use simple keys that are cut by code, which makes fleet spares straightforward.
Common Isuzu key and lock problems
These are the issues we see most often on Isuzu vehicles in Walnut:
- Worn keys and ignitions on high-mileage Rodeo and Trooper models
- Passlock faults on GM-built models
- Missing spares for commercial N-Series trucks
- Door locks seized from lack of use
All keys lost or just need a spare?
There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.
Stranded with your Isuzu right now?
If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.
Isuzu Amigo key replacement across Walnut
Located in Los Angeles County, Walnut is an incorporated city within our San Gabriel Valley service area. Our Isuzu key replacement service reaches all of Walnut, including Snow Creek, Timberline, Walnut Ridge, the Valley Boulevard corridor, and the Mt. SAC area, as well as the streets in between. You do not need to bring anything to a shop. Service is available throughout ZIP code 91789.
Walnut is an upscale hillside suburb with a large community college, where newer homes get smart-lock and high-security upgrades and college commuters need quick car lockout and key service.
If you are out and about near Mt. San Antonio College, Walnut Ranch Park, Suzanne Park, Snow Creek Park, or Creekside Park, give us that location when you call and wait somewhere safe and visible. Walnut is served by SR-57, SR-60, I-10, Valley Boulevard, Grand Avenue, and Lemon Avenue, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
Getting a Isuzu Amigo key made, step by step
Call with the year, make and model
Tell us you need a key for a Isuzu Amigo, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Isuzu key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a Isuzu Amigo key
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- All keys lost
- A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
- Immobilizer
- The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
Situations we are called to most often
- The key is locked in the trunk and the trunk release is disabled.
- The only key to the car is lost somewhere between the beach, the restaurant and home.
- The ignition will not turn and the key will not come out.
- The key fob went through the washing machine.
- A used car was sold with one worn key and no spare.
Why drivers in Walnut choose Big Daddy
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Walnut.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.

Looking after your Isuzu key
- If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
- Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
- Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
- Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
- When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
Choosing a car locksmith you can trust
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
Other Isuzu models
- Isuzu NPR keys
- Isuzu Rodeo keys
- Isuzu Trooper keys
- Isuzu Ascender keys
- Isuzu Axiom keys
- Isuzu i-Series keys
Related automotive locksmith services in Walnut
- Push-to-Start Key Programming
Programming proximity keys for push-button ignition vehicles.
- Key Fob Programming
Programming new or replacement key fobs.
- Boat Key Replacement
Replacing keys for boat ignitions, compartments and storage locks.
- Car Lockout
Unlocking vehicles when keys are locked inside.
- Spare Car Key
Creating duplicate or backup keys.
- Ignition Repair
Repairing ignition cylinders that are stuck, worn or will not turn.
- Car Key Replacement
Replacing lost, stolen or damaged car keys.
- Car Locksmith
On-site car key, lockout and ignition help wherever the vehicle is parked.
Isuzu Amigo keys near Walnut
We make Isuzu Amigo keys in the communities around Walnut as well. See the main Isuzu Amigo key replacement page or the Walnut locksmith page.
- Isuzu Amigo keys in Diamond Bar
- Isuzu Amigo keys in Rowland Heights
- Isuzu Amigo keys in La Puente
- Isuzu Amigo keys in Covina
- Isuzu Amigo keys in City of Industry
- Isuzu Amigo keys in West Covina
- Isuzu Amigo keys in Hacienda Heights
- Isuzu Amigo keys in La Habra Heights
- Isuzu Amigo keys in San Dimas
- Isuzu Amigo keys in Pomona
- Isuzu Amigo keys in Baldwin Park
- Isuzu Amigo keys in Irwindale
Isuzu Amigo key replacement in Walnut: frequently asked questions
Does an Isuzu key need programming?
Usually not. Most use a mechanical key that only needs to be cut correctly. GM-built models may need a Passlock relearn after ignition work.
Can you make keys for Isuzu commercial trucks?
Yes. N-Series truck keys are cut by code on site, and we can produce a set of spares for a fleet in one visit.
Does car insurance cover a replacement Isuzu key?
Some comprehensive policies, roadside plans and dealer key-protection plans do. Check your policy; we provide an itemized receipt you can submit.
What do you need from me to make a Isuzu Amigo key?
A photo ID and proof that the vehicle is yours, such as registration, title or insurance, plus access to the vehicle. Having the VIN ready when you call speeds things up.
How much does a Isuzu Amigo key cost?
It depends on the key type for your exact trim and on whether you still have a working key. Call (562) 550-7206 with the year, make and model and we will give you a price range before sending anyone.
Do you also repair the ignition on a Isuzu Amigo?
Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.
Can you make a key for a Isuzu Amigo if I have lost every key?
In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.
Will my lost Isuzu Amigo key still start the car?
For chip and smart keys we can usually erase lost keys from the car’s memory during programming, so they no longer start the engine. A lost key could still open the door mechanically unless the locks are rekeyed.
How many keys should I have for my Isuzu Amigo?
At least two. With two working keys you are never stranded, and on some makes two keys let you add another yourself.
How long does it take a locksmith to reach me in Walnut?
It depends on where the nearest technician is and on traffic along SR-57, SR-60, or I-10. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Do you have a locksmith shop in Walnut?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Walnut and the rest of the San Gabriel Valley area. All work is done at your location.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
