Quick answer
The 1997 Lexus GS typically uses a traditional laser-cut metal key with no transponder chip. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting. Big Daddy Car Key Replacement makes 1997 Lexus GS keys on site in Walnut, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 1997 Lexus GS
- Typical key
- Traditional metal key
- Transponder chip
- Usually no; varies
- Blade
- Laser-cut
- Programming
- Not normally required
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 1997 Lexus GS use?
- How we make a 1997 Lexus GS key
- How Lexus key and immobilizer systems work
- Common Lexus key and lock problems
- All keys lost or just need a spare?
- Stranded with your Lexus right now?
- 1997 Lexus GS key replacement across Walnut
- Getting a 1997 Lexus GS key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Lexus key?
- What affects the cost of a 1997 Lexus GS key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers in Walnut choose Big Daddy
- Looking after your Lexus key
- Choosing a car locksmith you can trust
- Other Lexus GS years
- Other Lexus models
- Related automotive locksmith services in Walnut
- 1997 Lexus GS keys near Walnut
- 1997 Lexus GS key replacement in Walnut: frequently asked questions
What kind of key does a 1997 Lexus GS use?
The 1997 Lexus GS typically uses a traditional laser-cut metal key with no transponder chip. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting.
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

How we make a 1997 Lexus GS key
For the 1997 Lexus GS we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.
This page covers the 1997 model year. For other years, see the Lexus GS key replacement overview, or browse all Lexus models.
How Lexus key and immobilizer systems work
Toyota, Lexus and Scion immobilizers have moved through several chip generations, commonly identified as 4C, 4D, G and H chips, followed by the Smart Key System with push-button start. Adding a key with a working master is quick. When all keys are lost, older models may need the immobilizer reset or reflashed, while newer ones are programmed through the diagnostic port with a calculated passcode.
Lexus has used laser-cut keys since the first LS and added SmartAccess proximity keys in the mid-2000s. A Lexus with every key lost can usually still be programmed on site, though some models need the immobilizer reset first.
Common Lexus key and lock problems
These are the issues we see most often on Lexus vehicles in Walnut:
- Valet (grey) keys that cannot be used to program additional keys on older models
- All-keys-lost situations on older Toyotas that require an immobilizer reset
- Smart keys that are not detected because of interference or a flat fob battery
- Worn door locks on high-mileage Camry, Corolla and Tacoma models
All keys lost or just need a spare?
There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.
Stranded with your Lexus right now?
If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.
1997 Lexus GS key replacement across Walnut
Located in Los Angeles County, Walnut is an incorporated city within our San Gabriel Valley service area. We cover every part of Walnut, including Snow Creek, Timberline, Walnut Ridge, the Valley Boulevard corridor, and the Mt. SAC area. Wherever you are in town, the technician comes to your door, driveway or parking space. That includes addresses in ZIP code 91789.
Walnut is an upscale hillside suburb with a large community college, where newer homes get smart-lock and high-security upgrades and college commuters need quick car lockout and key service.
If you are out and about near Mt. San Antonio College, Walnut Ranch Park, Suzanne Park, Snow Creek Park, or Creekside Park, give us that location when you call and wait somewhere safe and visible. Walnut is served by SR-57, SR-60, I-10, Valley Boulevard, Grand Avenue, and Lemon Avenue, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
Getting a 1997 Lexus GS key made, step by step
Call with the year, make and model
Tell us you need a key for a 1997 Lexus GS, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Lexus key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 1997 Lexus GS key
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- Immobilizer
- The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
- All keys lost
- A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
Situations we are called to most often
- The ignition will not turn and the key will not come out.
- A hardware-store copy opens the door but the engine will not start.
- The key is locked in the trunk and the trunk release is disabled.
- A used car was sold with one worn key and no spare.
- The key fob went through the washing machine.
Why drivers in Walnut choose Big Daddy
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.

Looking after your Lexus key
Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.
- If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
- Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
- Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
- Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
Choosing a car locksmith you can trust
- Get an itemized receipt showing labor, parts and the business details.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
Other Lexus GS years
- 2020 GS
- 2019 GS
- 2018 GS
- 2017 GS
- 2016 GS
- 2015 GS
- 2014 GS
- 2013 GS
- 2012 GS
- 2011 GS
- 2010 GS
- 2009 GS
- 2008 GS
- 2007 GS
- 2006 GS
- 2005 GS
- 2004 GS
- 2003 GS
- 2002 GS
- 2001 GS
- 2000 GS
- 1999 GS
- 1998 GS
- 1996 GS
- 1995 GS
- 1994 GS
- 1993 GS
Other Lexus models
- Lexus ES keys
- Lexus LS keys
- Lexus LX keys
- Lexus RX keys
- Lexus IS keys
- Lexus GX keys
- Lexus SC keys
- Lexus NX keys
- Lexus RC keys
- Lexus LC keys
- Lexus UX keys
- Lexus CT 200h keys
- Lexus RZ keys
Related automotive locksmith services in Walnut
- Emergency Vehicle Lockout
Fast unlocking for cars, trucks, SUVs, vans and work vehicles.
- Transponder Key Programming
Programming chip keys for vehicles with immobilizer systems.
- Car Key Replacement
Replacing lost, stolen or damaged car keys.
- Fleet Vehicle Locksmith
Key replacement, lockouts, rekeys and key duplication for business fleets.
- Ignition Replacement
Replacing damaged or failed ignition cylinders.
- Boat Key Replacement
Replacing keys for boat ignitions, compartments and storage locks.
- Car Door Lock Repair
Repairing vehicle door lock cylinders and mechanisms.
- Spare Car Key
Creating duplicate or backup keys.
1997 Lexus GS keys near Walnut
We make 1997 Lexus GS keys in the communities around Walnut as well. See the main 1997 Lexus GS key replacement page or the Walnut locksmith page.
- 1997 Lexus GS keys in Diamond Bar
- 1997 Lexus GS keys in Rowland Heights
- 1997 Lexus GS keys in La Puente
- 1997 Lexus GS keys in Covina
- 1997 Lexus GS keys in City of Industry
- 1997 Lexus GS keys in West Covina
- 1997 Lexus GS keys in Hacienda Heights
- 1997 Lexus GS keys in La Habra Heights
- 1997 Lexus GS keys in San Dimas
- 1997 Lexus GS keys in Pomona
- 1997 Lexus GS keys in Baldwin Park
- 1997 Lexus GS keys in Irwindale
1997 Lexus GS key replacement in Walnut: frequently asked questions
Does a 1997 Lexus GS key need programming?
A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.
Can any hardware store copy my 1997 Lexus GS key?
If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.
My Lexus key turns in the door but not the ignition. Why?
The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.
I lost all the keys to my Lexus. Does the computer have to be replaced?
No. That was once the dealer’s approach on older models. We reset or reprogram the existing immobilizer and register new keys, on site in most cases.
What is the difference between a Lexus master key and a valet key?
A master key opens and starts everything and can authorize new keys. A valet key starts the car and opens the doors but not the trunk or glove box, and on many models cannot be used to add keys.
Can you unlock my 1997 Lexus GS if the keys are inside?
Yes. We open vehicles without damage using air wedges and reach tools or by picking the door lock, at any hour.
How many keys should I have for my 1997 Lexus GS?
At least two. With two working keys you are never stranded, and on some makes two keys let you add another yourself.
Can you program a key I bought online for my 1997 Lexus GS?
We can try, if it is the correct part. We test the chip and frequency first. Many low-cost online keys are the wrong type or locked to another car, so we cannot guarantee a customer-supplied key.
How much does a 1997 Lexus GS key cost?
It depends on the key type for your exact trim and on whether you still have a working key. Call (562) 550-7206 with the year, make and model and we will give you a price range before sending anyone.
Does car insurance cover a replacement Lexus key?
Some comprehensive policies, roadside plans and dealer key-protection plans do. Check your policy; we provide an itemized receipt you can submit.
How long does it take a locksmith to reach me in Walnut?
It depends on where the nearest technician is and on traffic along SR-57, SR-60, or I-10. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Can you make car keys in Walnut?
Yes. We cut and program car keys on site anywhere in Walnut, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
