Quick answer
The 2007 Mitsubishi Lancer typically uses a remote head key, which combines a edge-cut blade, a transponder chip and lock and unlock buttons in one unit. Big Daddy Car Key Replacement makes 2007 Mitsubishi Lancer keys on site in Walnut, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 2007 Mitsubishi Lancer
- Typical key
- Remote head key
- Transponder chip
- Yes
- Blade
- Edge-cut
- Programming
- Required, done on site
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 2007 Mitsubishi Lancer use?
- How we make a 2007 Mitsubishi Lancer key
- How Mitsubishi key and immobilizer systems work
- Common Mitsubishi key and lock problems
- All keys lost or just need a spare?
- Stranded with your Mitsubishi right now?
- 2007 Mitsubishi Lancer key replacement across Walnut
- Getting a 2007 Mitsubishi Lancer key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Mitsubishi key?
- What affects the cost of a 2007 Mitsubishi Lancer key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers in Walnut choose Big Daddy
- Looking after your Mitsubishi key
- Choosing a car locksmith you can trust
- Other Mitsubishi Lancer years
- Other Mitsubishi models
- Related automotive locksmith services in Walnut
- 2007 Mitsubishi Lancer keys near Walnut
- 2007 Mitsubishi Lancer key replacement in Walnut: frequently asked questions
What kind of key does a 2007 Mitsubishi Lancer use?
The 2007 Mitsubishi Lancer typically uses a remote head key, which combines a edge-cut blade, a transponder chip and lock and unlock buttons in one unit.
Remote head key
A remote head key puts three parts into one housing: a cut metal blade, a transponder chip that satisfies the immobilizer, and a remote transmitter for lock, unlock, trunk and panic. Flip keys, where the blade folds into the fob, work the same way. The remote and the chip are separate systems and are often programmed in separate steps.

How we make a 2007 Mitsubishi Lancer key
For the 2007 Mitsubishi Lancer we match the remote by its frequency and part number, cut the blade to code, program the transponder so the engine starts, and then pair the remote buttons. If your old key’s electronics still work and only the shell or blade is broken, moving them into a new case is a cheaper repair. Expect 20 to 40 minutes for most remote head keys with the vehicle present, and somewhat longer when all keys are lost.
This page covers the 2007 model year. For other years, see the Mitsubishi Lancer key replacement overview, or browse all Mitsubishi models.
How Mitsubishi key and immobilizer systems work
Mitsubishi immobilizers register transponders in the engine computer or the ETACS body module. Programming needs a diagnostic tool and, on many models, a PIN. Remote functions are frequently programmed separately from the chip. The FAST-Key proximity system on later models is registered through the same port.
Mitsubishi phased in immobilizers from about 2000 and later offered the FAST-Key proximity system. Programming needs a PIN and, on some models, registration of each remote separately from the chip.
Common Mitsubishi key and lock problems
These are the issues we see most often on Mitsubishi vehicles in Walnut:
- Remotes that stop working while the chip still starts the car
- Lost keys on models that need a PIN for programming
- FAST-Key fobs not detected with a weak battery
- Worn ignition cylinders on older Galant and Eclipse models
All keys lost or just need a spare?
There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.
Stranded with your Mitsubishi right now?
If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.
2007 Mitsubishi Lancer key replacement across Walnut
Located in Los Angeles County, Walnut is an incorporated city within our San Gabriel Valley service area. We cover every part of Walnut, including Snow Creek, Timberline, Walnut Ridge, the Valley Boulevard corridor, and the Mt. SAC area. Wherever you are in town, the technician comes to your door, driveway or parking space. That includes addresses in ZIP code 91789.
Walnut is an upscale hillside suburb with a large community college, where newer homes get smart-lock and high-security upgrades and college commuters need quick car lockout and key service.
People call us from all over Walnut, including the areas around Mt. San Antonio College, Walnut Ranch Park, Suzanne Park, Snow Creek Park, and Creekside Park. A landmark or cross street helps the technician reach you quickly. Walnut is served by SR-57, SR-60, I-10, Valley Boulevard, Grand Avenue, and Lemon Avenue, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
Getting a 2007 Mitsubishi Lancer key made, step by step
Call with the year, make and model
Tell us you need a key for a 2007 Mitsubishi Lancer, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Mitsubishi key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 2007 Mitsubishi Lancer key
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
The remote itself is the main cost, followed by programming. OEM remotes cost more than quality aftermarket ones; we explain the difference and let you choose where both are available. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
- All keys lost
- A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
Situations we are called to most often
- The dash reads "key not detected" and the start button does nothing.
- The key fob went through the washing machine.
- The key is locked in the trunk and the trunk release is disabled.
- A hardware-store copy opens the door but the engine will not start.
- The only key to the car is lost somewhere between the beach, the restaurant and home.
Why drivers in Walnut choose Big Daddy
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Walnut.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.

Looking after your Mitsubishi key
Buttons fail before anything else. A silicone cover and a light keychain extend the life of the key, and a worn rubber pad can be replaced before the circuit board is damaged.
- Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
- Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
- When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
- Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
- If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
- Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
Choosing a car locksmith you can trust
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Get an itemized receipt showing labor, parts and the business details.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
Other Mitsubishi Lancer years
- 2017 Lancer
- 2016 Lancer
- 2015 Lancer
- 2014 Lancer
- 2013 Lancer
- 2012 Lancer
- 2011 Lancer
- 2010 Lancer
- 2009 Lancer
- 2008 Lancer
- 2006 Lancer
- 2005 Lancer
- 2004 Lancer
- 2003 Lancer
- 2002 Lancer
Other Mitsubishi models
- Mitsubishi Mirage keys
- Mitsubishi Outlander keys
- Mitsubishi Eclipse keys
- Mitsubishi Galant keys
- Mitsubishi Montero keys
- Mitsubishi Outlander Sport keys
- Mitsubishi Diamante keys
- Mitsubishi 3000GT keys
- Mitsubishi Eclipse Cross keys
- Mitsubishi Endeavor keys
- Mitsubishi Montero Sport keys
- Mitsubishi Raider keys
Related automotive locksmith services in Walnut
- Spare Car Key
Creating duplicate or backup keys.
- Scooter Key Replacement
Making replacement keys for scooters and small vehicles.
- Car Key Cutting
Cutting standard, high-security and laser-cut automotive keys.
- Ignition Replacement
Replacing damaged or failed ignition cylinders.
- Key Fob Programming
Programming new or replacement key fobs.
- Car Key Replacement
Replacing lost, stolen or damaged car keys.
- Key Fob Replacement
Replacing remote key fobs for cars, trucks, SUVs and vans.
- Push-to-Start Key Programming
Programming proximity keys for push-button ignition vehicles.
2007 Mitsubishi Lancer keys near Walnut
We make 2007 Mitsubishi Lancer keys in the communities around Walnut as well. See the main 2007 Mitsubishi Lancer key replacement page or the Walnut locksmith page.
- 2007 Mitsubishi Lancer keys in Diamond Bar
- 2007 Mitsubishi Lancer keys in Rowland Heights
- 2007 Mitsubishi Lancer keys in La Puente
- 2007 Mitsubishi Lancer keys in Covina
- 2007 Mitsubishi Lancer keys in City of Industry
- 2007 Mitsubishi Lancer keys in West Covina
- 2007 Mitsubishi Lancer keys in Hacienda Heights
- 2007 Mitsubishi Lancer keys in La Habra Heights
- 2007 Mitsubishi Lancer keys in San Dimas
- 2007 Mitsubishi Lancer keys in Pomona
- 2007 Mitsubishi Lancer keys in Baldwin Park
- 2007 Mitsubishi Lancer keys in Irwindale
2007 Mitsubishi Lancer key replacement in Walnut: frequently asked questions
The buttons on my 2007 Mitsubishi Lancer key stopped working but it still starts the car. What is wrong?
The remote transmitter has failed or its battery is dead, while the separate transponder chip is fine. Try a new battery first. If that does not help, the remote portion needs repair or replacement.
Can you replace only the shell of my Mitsubishi key?
Yes. If the circuit board and chip work, we transfer them into a new shell and cut a new blade, which costs much less than a complete key.
Will an aftermarket remote key work on my 2007 Mitsubishi Lancer?
A quality aftermarket key with the correct chip and frequency works the same as the original. Very cheap online keys are a gamble; many cannot be programmed at all.
Can you program a key for my Mitsubishi?
Yes for most models. We cut the key, program the transponder and pair the remote on site.
Why does my Mitsubishi remote not work after the key was programmed?
The remote and the transponder are separate systems on many Mitsubishis. The remote needs its own registration step.
How much does a 2007 Mitsubishi Lancer key cost?
It depends on the key type for your exact trim and on whether you still have a working key. Call (562) 550-7206 with the year, make and model and we will give you a price range before sending anyone.
What do you need from me to make a 2007 Mitsubishi Lancer key?
A photo ID and proof that the vehicle is yours, such as registration, title or insurance, plus access to the vehicle. Having the VIN ready when you call speeds things up.
Do you also repair the ignition on a 2007 Mitsubishi Lancer?
Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.
Do I have to tow my 2007 Mitsubishi Lancer to you?
No. We are a mobile service. The key machines and programming equipment are in the van, and the work is done where the vehicle is parked.
Can you program a key I bought online for my 2007 Mitsubishi Lancer?
We can try, if it is the correct part. We test the chip and frequency first. Many low-cost online keys are the wrong type or locked to another car, so we cannot guarantee a customer-supplied key.
Do you have a locksmith shop in Walnut?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Walnut and the rest of the San Gabriel Valley area. All work is done at your location.
Is there a travel charge for Walnut?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Walnut, so you know the cost in advance.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
