Skip to content
Big Daddy Car Key Replacement logo(562) 550-7206

Scion iM Key Replacement in Walnut, CA

Lost or broken Scion iM key? Big Daddy Car Key Replacement cuts and programs a new one at your vehicle in Walnut, 24 hours a day. No tow and no dealer appointment.

(562) 550-7206
  • Open 24 hours, every day
  • We come to you
  • Price range before we dispatch
Scion iM Key Replacement in Walnut, CA by Big Daddy Car Key Replacement

Quick answer

Big Daddy Car Key Replacement cuts and programs Scion iM keys on site in Walnut, CA, 24 hours a day, including transponder keys, remote head keys and smart keys where the vehicle uses them. Call (562) 550-7206 for a price range.

Last updated

Vehicle
Scion iM
Model years covered
2016
Service area
Walnut, CA
Hours
Open 24 hours, 7 days a week
Service type
Mobile, at your vehicle
Phone
(562) 550-7206
On this page

Scion iM keys made and programmed on site

The Scion iM was sold in the United States for model years 2016, and its key technology changed along the way. We make keys for every one of those years in Walnut: cut to factory code, programmed to the immobilizer where the car has one, and tested before we leave. Scion models use Toyota key systems, typically a transponder key with a separate remote. The FR-S shares its key system with Subaru, and the iA uses Mazda’s push-button start.

Scion iM key replacement in Walnut
Scion iM keys are cut and programmed at the vehicle in Walnut.

Scion iM key types by model year

The table shows the key most Scion iM models left the factory with in each period. Trim levels and options vary, so we always confirm against your vehicle and VIN.

Typical factory key equipment for the Scion iM.
Model yearsTypical keyTransponder chipBlade
2016Transponder chip keyYesEdge-cut

Choose your Scion iM year

Select a model year for the exact key type, programming method and what to expect.

Types of Scion iM keys

Transponder chip key

A transponder key looks like an ordinary key with a plastic head, but the head holds a tiny chip with no battery. When you turn the ignition, an antenna ring around the lock energizes the chip and asks for its code. If the immobilizer recognizes the answer, it lets the engine run. If not, the engine cranks without starting or starts and dies within seconds. For the Scion iM we cut the blade to code, then program the chip. Where a working key exists, its data can often be cloned or used to authorize a new key quickly. When every key is lost, we connect to the car through the diagnostic port, obtain security access, and register new keys directly to the immobilizer.

How Scion key and immobilizer systems work

Toyota, Lexus and Scion immobilizers have moved through several chip generations, commonly identified as 4C, 4D, G and H chips, followed by the Smart Key System with push-button start. Adding a key with a working master is quick. When all keys are lost, older models may need the immobilizer reset or reflashed, while newer ones are programmed through the diagnostic port with a calculated passcode.

Common Scion key and lock problems

These are the issues we see most often on Scion vehicles in Walnut:

  • Valet (grey) keys that cannot be used to program additional keys on older models
  • All-keys-lost situations on older Toyotas that require an immobilizer reset
  • Smart keys that are not detected because of interference or a flat fob battery
  • Worn door locks on high-mileage Camry, Corolla and Tacoma models

All keys lost or just need a spare?

How many keys you still have matters more than almost anything else. With one working key present, a second key can usually be copied or added in a short visit. With no keys at all, the technician must first work out the correct cuts, from the VIN or by decoding a lock, and then gain security access to the immobilizer so a new key can be registered. That all-keys-lost process is routine for us and is done on site, but it takes more time. If you are down to your last key, adding a spare today is far cheaper than replacing every key later.

Stranded with your Scion right now?

Stuck without a working key? First make sure you are somewhere safe and visible. Think about whether a spare exists at home or with a family member. Then call (562) 550-7206 and give us the year, make, model, your location and whether the vehicle is locked or open. We will tell you the likely cost and how long a technician will take to reach you. For a child or pet locked inside, call 911 before anything else.

Scion iM key replacement across Walnut

Walnut is an incorporated city in Los Angeles County, part of the San Gabriel Valley area we cover every day. We cover every part of Walnut, including Snow Creek, Timberline, Walnut Ridge, the Valley Boulevard corridor, and the Mt. SAC area. Wherever you are in town, the technician comes to your door, driveway or parking space. We serve the 91789 ZIP code.

Walnut is an upscale hillside suburb with a large community college, where newer homes get smart-lock and high-security upgrades and college commuters need quick car lockout and key service.

Whether you are at home, at work, or stuck near Mt. San Antonio College, Walnut Ranch Park, Suzanne Park, Snow Creek Park, or Creekside Park, tell the dispatcher the nearest landmark and we will find you. Depending on where the closest technician is, the drive into Walnut follows SR-57, SR-60, I-10, Valley Boulevard, Grand Avenue, and Lemon Avenue. You get a realistic arrival estimate when you call.

Getting a Scion iM key made, step by step

  1. Call with the year, make and model

    Tell us you need a key for a Scion iM, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.

  2. We verify ownership

    Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.

  3. We identify the exact key system

    Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.

  4. The key is cut to code

    The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.

  5. The key is programmed to the car

    For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.

  6. Everything is tested before we leave

    We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

Programming a Scion iM key in Walnut
Keys are programmed through the vehicle’s diagnostic port and tested before we leave.

What to have ready

  • A government-issued photo ID
  • The vehicle registration, title or current insurance card in your name
  • The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
  • Any remaining keys or remotes, including ones that no longer work
  • The vehicle itself, parked where a technician can open the driver’s door fully

Mobile locksmith or dealership for a Scion key?

Mobile locksmithDealership
Where the work happensAt your vehicle, wherever it is parkedAt the dealer’s service department
Towing with all keys lostNot neededUsually required
AvailabilityOpen 24 hours, including weekends and holidaysService department business hours
Typical waitOften the same dayAppointment, plus time to order the key by VIN
Key optionsOEM or quality aftermarket where availableOEM only
Restricted late-model systemsSome require a dealer key; we tell you up frontSupported

A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.

What affects the cost of a Scion iM key

Time and location
Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
OEM or aftermarket parts
Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
Model year and system generation
Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
Lock or ignition condition
If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
Key technology
A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.

Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.

Lost keys and vehicle security

Whoever finds a lost key might find the car. During programming we can usually remove lost keys from the vehicle’s memory, which stops them starting the engine. That does not change the mechanical door lock, so if theft is a concern, the door cylinders can be rekeyed to a new cut as well.

Equipment we bring to the vehicle

Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.

Car key terms explained

All keys lost
A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
Remote head key
A key with the lock and unlock buttons built into its head, alongside the blade and chip.
Proximity key
A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
Transponder
A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
Diagnostic port
The connector under the dashboard through which keys are programmed to the vehicle’s computer.
VIN
The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
Key code
A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.

Situations we are called to most often

  • A hardware-store copy opens the door but the engine will not start.
  • The only key to the car is lost somewhere between the beach, the restaurant and home.
  • The ignition will not turn and the key will not come out.
  • The key is locked in the trunk and the trunk release is disabled.
  • A used car was sold with one worn key and no spare.

Why drivers in Walnut choose Big Daddy

A workshop that comes to you
Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
One company for home, business and vehicle
The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
A real, reachable business
Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
Most jobs finished in one visit
Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
Non-destructive methods first
Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
Ownership is always verified
We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
Scion car key service in Walnut
Big Daddy Car Key Replacement: mobile, open 24 hours.

Looking after your Scion key

  • Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
  • Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
  • Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
  • If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
  • Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
  • Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
  • Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.

Choosing a car locksmith you can trust

  • Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
  • Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
  • Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
  • In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
  • Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.

Other Scion models

Scion iM keys near Walnut

We make Scion iM keys in the communities around Walnut as well. See the main Scion iM key replacement page or the Walnut locksmith page.

Scion iM key replacement in Walnut: frequently asked questions

I lost all the keys to my Scion. Does the computer have to be replaced?

No. That was once the dealer’s approach on older models. We reset or reprogram the existing immobilizer and register new keys, on site in most cases.

What is the difference between a Scion master key and a valet key?

A master key opens and starts everything and can authorize new keys. A valet key starts the car and opens the doors but not the trunk or glove box, and on many models cannot be used to add keys.

How many keys should I have for my Scion iM?

At least two. With two working keys you are never stranded, and on some makes two keys let you add another yourself.

Is a locksmith-made Scion key as good as a dealer key?

Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.

Can you make a Scion iM key at night or on a weekend?

Yes. We are open 24 hours, seven days a week, including holidays, which is when dealership parts and service departments are closed.

Do you also repair the ignition on a Scion iM?

Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.

Can you unlock my Scion iM if the keys are inside?

Yes. We open vehicles without damage using air wedges and reach tools or by picking the door lock, at any hour.

What do you need from me to make a Scion iM key?

A photo ID and proof that the vehicle is yours, such as registration, title or insurance, plus access to the vehicle. Having the VIN ready when you call speeds things up.

Can you make a key for a Scion iM if I have lost every key?

In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.

Which parts of Walnut do you serve?

All of Walnut, including Snow Creek, Timberline, Walnut Ridge, and the Valley Boulevard corridor, and addresses in ZIP code 91789.

Do you have a locksmith shop in Walnut?

We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Walnut and the rest of the San Gabriel Valley area. All work is done at your location.

Do you check identification?

Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.

Can I book an appointment in advance?

Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.

Call Now (562) 550-7206Open 24 hours · mobile locksmith