Quick answer
The 2004 Subaru WRX typically uses a traditional edge-cut metal key with no transponder chip. Big Daddy Car Key Replacement makes 2004 Subaru WRX keys on site in Walnut, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 2004 Subaru WRX
- Typical key
- Traditional metal key
- Transponder chip
- No
- Blade
- Edge-cut
- Programming
- Not normally required
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 2004 Subaru WRX use?
- How we make a 2004 Subaru WRX key
- How Subaru key and immobilizer systems work
- Common Subaru key and lock problems
- All keys lost or just need a spare?
- Stranded with your Subaru right now?
- 2004 Subaru WRX key replacement across Walnut
- Getting a 2004 Subaru WRX key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Subaru key?
- What affects the cost of a 2004 Subaru WRX key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers in Walnut choose Big Daddy
- Looking after your Subaru key
- Choosing a car locksmith you can trust
- Other Subaru WRX years
- Other Subaru models
- Related automotive locksmith services in Walnut
- 2004 Subaru WRX keys near Walnut
- 2004 Subaru WRX key replacement in Walnut: frequently asked questions
What kind of key does a 2004 Subaru WRX use?
The 2004 Subaru WRX typically uses a traditional edge-cut metal key with no transponder chip.
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

How we make a 2004 Subaru WRX key
For the 2004 Subaru WRX we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.
This page covers the 2004 model year. For other years, see the Subaru WRX key replacement overview, or browse all Subaru models.
How Subaru key and immobilizer systems work
Subaru introduced transponder immobilizers in the mid-2000s. Keys are registered through the diagnostic port with a security code, and all keys must be present because they are registered together. Later models add remote-head keys and proximity fobs with push-button start, programmed in a similar way.
Subaru introduced immobilizers on the 2005 Legacy and Outback and extended them through the range by 2008. Push-button start arrived on upper trims from 2013 and is now common across the lineup.
Common Subaru key and lock problems
These are the issues we see most often on Subaru vehicles in Walnut:
- Lost keys on vehicles where every key is registered at once
- Remote-head keys with failed buttons
- Proximity fobs not detected after battery replacement
- Uncertainty about whether older Imprezas and Foresters have a chip
All keys lost or just need a spare?
There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.
Stranded with your Subaru right now?
If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.
2004 Subaru WRX key replacement across Walnut
Located in Los Angeles County, Walnut is an incorporated city within our San Gabriel Valley service area. We cover every part of Walnut, including Snow Creek, Timberline, Walnut Ridge, the Valley Boulevard corridor, and the Mt. SAC area. Wherever you are in town, the technician comes to your door, driveway or parking space. Service is available throughout ZIP code 91789.
Walnut is an upscale hillside suburb with a large community college, where newer homes get smart-lock and high-security upgrades and college commuters need quick car lockout and key service.
Whether you are at home, at work, or stuck near Mt. San Antonio College, Walnut Ranch Park, Suzanne Park, Snow Creek Park, or Creekside Park, tell the dispatcher the nearest landmark and we will find you. Technicians usually reach Walnut by SR-57, SR-60, I-10, Valley Boulevard, Grand Avenue, and Lemon Avenue. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
Getting a 2004 Subaru WRX key made, step by step
Call with the year, make and model
Tell us you need a key for a 2004 Subaru WRX, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Subaru key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 2004 Subaru WRX key
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
- Immobilizer
- The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
Situations we are called to most often
- The ignition will not turn and the key will not come out.
- A used car was sold with one worn key and no spare.
- The dash reads "key not detected" and the start button does nothing.
- The key fob went through the washing machine.
- The only key to the car is lost somewhere between the beach, the restaurant and home.
Why drivers in Walnut choose Big Daddy
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.

Looking after your Subaru key
Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.
- If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
- When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
- Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
Choosing a car locksmith you can trust
- Get an itemized receipt showing labor, parts and the business details.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
Other Subaru WRX years
- 2026 WRX
- 2025 WRX
- 2024 WRX
- 2023 WRX
- 2022 WRX
- 2021 WRX
- 2020 WRX
- 2019 WRX
- 2018 WRX
- 2017 WRX
- 2016 WRX
- 2015 WRX
- 2014 WRX
- 2013 WRX
- 2012 WRX
- 2011 WRX
- 2010 WRX
- 2009 WRX
- 2008 WRX
- 2007 WRX
- 2006 WRX
- 2005 WRX
- 2003 WRX
- 2002 WRX
Other Subaru models
- Subaru Legacy keys
- Subaru Impreza keys
- Subaru Outback keys
- Subaru Forester keys
- Subaru BRZ keys
- Subaru Crosstrek keys
- Subaru Tribeca keys
- Subaru Ascent keys
- Subaru Baja keys
- Subaru Solterra keys
Related automotive locksmith services in Walnut
- Car Key Replacement
Replacing lost, stolen or damaged car keys.
- Key Fob Replacement
Replacing remote key fobs for cars, trucks, SUVs and vans.
- Trunk Lockout Service
Opening locked trunks when keys are lost or locked inside.
- Spare Car Key
Creating duplicate or backup keys.
- Push-to-Start Key Programming
Programming proximity keys for push-button ignition vehicles.
- Lost Car Key Replacement
Making a new car key when all keys are lost.
- Laser Cut Key
Cutting high-security sidewinder/laser-cut keys.
- Ignition Replacement
Replacing damaged or failed ignition cylinders.
2004 Subaru WRX keys near Walnut
We make 2004 Subaru WRX keys in the communities around Walnut as well. See the main 2004 Subaru WRX key replacement page or the Walnut locksmith page.
- 2004 Subaru WRX keys in Diamond Bar
- 2004 Subaru WRX keys in Rowland Heights
- 2004 Subaru WRX keys in La Puente
- 2004 Subaru WRX keys in Covina
- 2004 Subaru WRX keys in City of Industry
- 2004 Subaru WRX keys in West Covina
- 2004 Subaru WRX keys in Hacienda Heights
- 2004 Subaru WRX keys in La Habra Heights
- 2004 Subaru WRX keys in San Dimas
- 2004 Subaru WRX keys in Pomona
- 2004 Subaru WRX keys in Baldwin Park
- 2004 Subaru WRX keys in Irwindale
2004 Subaru WRX key replacement in Walnut: frequently asked questions
Does a 2004 Subaru WRX key need programming?
A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.
Can any hardware store copy my 2004 Subaru WRX key?
If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.
My Subaru key turns in the door but not the ignition. Why?
The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.
Does my older Subaru have a chip key?
Legacy and Outback models have had immobilizers since 2005, and other models followed by about 2008. We check your key and vehicle before cutting.
Do I need to bring all my Subaru keys for programming?
Yes. Keys are registered as a set, and any key not present will stop starting the car.
Can you unlock my 2004 Subaru WRX if the keys are inside?
Yes. We open vehicles without damage using air wedges and reach tools or by picking the door lock, at any hour.
Is a locksmith-made Subaru key as good as a dealer key?
Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.
Do I have to tow my 2004 Subaru WRX to you?
No. We are a mobile service. The key machines and programming equipment are in the van, and the work is done where the vehicle is parked.
Can you make a 2004 Subaru WRX key at night or on a weekend?
Yes. We are open 24 hours, seven days a week, including holidays, which is when dealership parts and service departments are closed.
Can you make a key for a 2004 Subaru WRX if I have lost every key?
In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.
Do you have a locksmith shop in Walnut?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Walnut and the rest of the San Gabriel Valley area. All work is done at your location.
How long does it take a locksmith to reach me in Walnut?
It depends on where the nearest technician is and on traffic along SR-57, SR-60, or I-10. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
