Quick answer
The 1997 Mitsubishi Galant typically uses a traditional edge-cut metal key with no transponder chip. Big Daddy Car Key Replacement makes 1997 Mitsubishi Galant keys on site in West Carson, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 1997 Mitsubishi Galant
- Typical key
- Traditional metal key
- Transponder chip
- No
- Blade
- Edge-cut
- Programming
- Not normally required
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 1997 Mitsubishi Galant use?
- How we make a 1997 Mitsubishi Galant key
- How Mitsubishi key and immobilizer systems work
- Common Mitsubishi key and lock problems
- All keys lost or just need a spare?
- Stranded with your Mitsubishi right now?
- 1997 Mitsubishi Galant key replacement across West Carson
- Getting a 1997 Mitsubishi Galant key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Mitsubishi key?
- What affects the cost of a 1997 Mitsubishi Galant key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers in West Carson choose Big Daddy
- Looking after your Mitsubishi key
- Choosing a car locksmith you can trust
- Other Mitsubishi Galant years
- Other Mitsubishi models
- Related automotive locksmith services in West Carson
- 1997 Mitsubishi Galant keys near West Carson
- 1997 Mitsubishi Galant key replacement in West Carson: frequently asked questions
What kind of key does a 1997 Mitsubishi Galant use?
The 1997 Mitsubishi Galant typically uses a traditional edge-cut metal key with no transponder chip.
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

How we make a 1997 Mitsubishi Galant key
For the 1997 Mitsubishi Galant we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.
This page covers the 1997 model year. For other years, see the Mitsubishi Galant key replacement overview, or browse all Mitsubishi models.
How Mitsubishi key and immobilizer systems work
Mitsubishi immobilizers register transponders in the engine computer or the ETACS body module. Programming needs a diagnostic tool and, on many models, a PIN. Remote functions are frequently programmed separately from the chip. The FAST-Key proximity system on later models is registered through the same port.
Mitsubishi phased in immobilizers from about 2000 and later offered the FAST-Key proximity system. Programming needs a PIN and, on some models, registration of each remote separately from the chip.
Common Mitsubishi key and lock problems
These are the issues we see most often on Mitsubishi vehicles in West Carson:
- Remotes that stop working while the chip still starts the car
- Lost keys on models that need a PIN for programming
- FAST-Key fobs not detected with a weak battery
- Worn ignition cylinders on older Galant and Eclipse models
All keys lost or just need a spare?
There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.
Stranded with your Mitsubishi right now?
If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.
1997 Mitsubishi Galant key replacement across West Carson
Located in Los Angeles County, West Carson is an unincorporated community within our South Bay service area. We cover every part of West Carson, including the Vermont Avenue corridor, the Normandie Avenue corridor, the Carson Street corridor, and the medical center district. Wherever you are in town, the technician comes to your door, driveway or parking space. That includes addresses in ZIP codes 90502, 90710, and 90745.
West Carson is an unincorporated community centered on a major county hospital, with mobile-home parks, condos and single-family streets where lockouts and mailbox locks are common calls.
If you are out and about near Harbor–UCLA Medical Center, Wishing Tree Park, the Carson Street retail centers, or the neighboring Harbor Gateway, give us that location when you call and wait somewhere safe and visible. Technicians usually reach West Carson by I-110, I-405, Vermont Avenue, Normandie Avenue, Carson Street, and Torrance Boulevard. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
Getting a 1997 Mitsubishi Galant key made, step by step
Call with the year, make and model
Tell us you need a key for a 1997 Mitsubishi Galant, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Mitsubishi key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 1997 Mitsubishi Galant key
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Immobilizer
- The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
Situations we are called to most often
- A used car was sold with one worn key and no spare.
- The key is locked in the trunk and the trunk release is disabled.
- The key fob went through the washing machine.
- The dash reads "key not detected" and the start button does nothing.
- The only key to the car is lost somewhere between the beach, the restaurant and home.
Why drivers in West Carson choose Big Daddy
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to West Carson.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.

Looking after your Mitsubishi key
Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.
- Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
- Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
- Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
- When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
Choosing a car locksmith you can trust
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
Other Mitsubishi Galant years
- 2012 Galant
- 2011 Galant
- 2010 Galant
- 2009 Galant
- 2008 Galant
- 2007 Galant
- 2006 Galant
- 2005 Galant
- 2004 Galant
- 2003 Galant
- 2002 Galant
- 2001 Galant
- 2000 Galant
- 1999 Galant
- 1998 Galant
- 1996 Galant
- 1995 Galant
- 1994 Galant
- 1993 Galant
- 1992 Galant
- 1991 Galant
- 1990 Galant
Other Mitsubishi models
- Mitsubishi Mirage keys
- Mitsubishi Outlander keys
- Mitsubishi Eclipse keys
- Mitsubishi Montero keys
- Mitsubishi Lancer keys
- Mitsubishi Outlander Sport keys
- Mitsubishi Diamante keys
- Mitsubishi 3000GT keys
- Mitsubishi Eclipse Cross keys
- Mitsubishi Endeavor keys
- Mitsubishi Montero Sport keys
- Mitsubishi Raider keys
Related automotive locksmith services in West Carson
- Key Fob Programming
Programming new or replacement key fobs.
- Fleet Vehicle Locksmith
Key replacement, lockouts, rekeys and key duplication for business fleets.
- Lost Car Key Replacement
Making a new car key when all keys are lost.
- Car Key Replacement
Replacing lost, stolen or damaged car keys.
- Emergency Vehicle Lockout
Fast unlocking for cars, trucks, SUVs, vans and work vehicles.
- Motorcycle Key Replacement
Replacing lost or broken motorcycle keys.
- Trunk Lockout Service
Opening locked trunks when keys are lost or locked inside.
- Ignition Key Replacement
Making replacement keys for vehicle ignitions.
1997 Mitsubishi Galant keys near West Carson
We make 1997 Mitsubishi Galant keys in the communities around West Carson as well. See the main 1997 Mitsubishi Galant key replacement page or the West Carson locksmith page.
- 1997 Mitsubishi Galant keys in Carson
- 1997 Mitsubishi Galant keys in Lomita
- 1997 Mitsubishi Galant keys in Torrance
- 1997 Mitsubishi Galant keys in Rolling Hills Estates
- 1997 Mitsubishi Galant keys in Gardena
- 1997 Mitsubishi Galant keys in Lawndale
- 1997 Mitsubishi Galant keys in Rolling Hills
- 1997 Mitsubishi Galant keys in Palos Verdes Estates
- 1997 Mitsubishi Galant keys in Redondo Beach
- 1997 Mitsubishi Galant keys in Compton
- 1997 Mitsubishi Galant keys in Long Beach
- 1997 Mitsubishi Galant keys in Hermosa Beach
1997 Mitsubishi Galant key replacement in West Carson: frequently asked questions
Does a 1997 Mitsubishi Galant key need programming?
A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.
Can any hardware store copy my 1997 Mitsubishi Galant key?
If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.
My Mitsubishi key turns in the door but not the ignition. Why?
The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.
Can you program a key for my Mitsubishi?
Yes for most models. We cut the key, program the transponder and pair the remote on site.
Why does my Mitsubishi remote not work after the key was programmed?
The remote and the transponder are separate systems on many Mitsubishis. The remote needs its own registration step.
Is a locksmith-made Mitsubishi key as good as a dealer key?
Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.
Do I have to tow my 1997 Mitsubishi Galant to you?
No. We are a mobile service. The key machines and programming equipment are in the van, and the work is done where the vehicle is parked.
Does car insurance cover a replacement Mitsubishi key?
Some comprehensive policies, roadside plans and dealer key-protection plans do. Check your policy; we provide an itemized receipt you can submit.
Do you also repair the ignition on a 1997 Mitsubishi Galant?
Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.
What do you need from me to make a 1997 Mitsubishi Galant key?
A photo ID and proof that the vehicle is yours, such as registration, title or insurance, plus access to the vehicle. Having the VIN ready when you call speeds things up.
Are you open 24 hours in West Carson?
Yes. We take calls and dispatch to West Carson 24 hours a day, including weekends and holidays.
Can you make car keys in West Carson?
Yes. We cut and program car keys on site anywhere in West Carson, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
