Quick answer
Door Closer Repair: Adjusting or repairing doors that slam, close too slowly, do not latch or stay open. Big Daddy Car Key Replacement provides door closer repair service in West Hills as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Door Closer Repair
- Area
- West Hills, Los Angeles County, CA (91307, 91304)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Commercial Locksmith Services
- Phone
- (562) 550-7206
On this page
- What door closer repair means
- Who uses this service
- When you need door closer repair service
- Door Closer Repair across West Hills
- Our door closer repair process, step by step
- Common situations in West Hills
- Equipment and hardware on the van
- Terms worth knowing
- Cost factors for door closer repair service
- Why call Big Daddy Car Key Replacement
- Tips to avoid problems
- Why this is a job for a locksmith
- What we commit to
- Choosing a locksmith: a short checklist
- Before you call (562) 550-7206
- After the visit
- Related locksmith services in West Hills
- Door Closer Repair near West Hills
- Door Closer Repair in West Hills: frequently asked questions
What door closer repair means
Adjusting or repairing doors that slam, close too slowly, do not latch or stay open. Most door closer complaints are adjustment problems: sweep speed, latch speed and backcheck are controlled by small valves that drift or get turned too far. Oil on the closer body or the floor, however, means the seal has failed and the closer must be replaced, since leaking units cannot be reliably rebuilt on site.

Every business in West Hills eventually faces the same questions. Who has keys? Do the exit doors work? Would the back door survive a pry bar? Our door closer repair service gives practical answers and carries out the work, usually in a single visit and with as little disruption as possible.
Who uses this service
Our commercial customers in West Hills include retail shops, restaurants, offices, medical and dental practices, warehouses, schools, places of worship, property management companies and homeowners associations. Some need a one-time rekey after a staffing change, others an ongoing arrangement covering key systems, exit hardware and door maintenance across several sites.
This service is part of our commercial locksmith services in West Hills.
When you need door closer repair service
If any of the following sounds familiar, door closer repair service is likely what you need:
- The door slams shut
- The door closes too slowly or stops short
- Oil is leaking from the closer
- The closer arm is loose or disconnected
Door Closer Repair across West Hills
West Hills is a neighborhood of the City of Los Angeles in Los Angeles County, part of the San Fernando Valley area we cover every day. We cover every part of West Hills, including the Valley Circle hills, the Fallbrook corridor, the Platt Avenue corridor, and the Bell Canyon gateway. Wherever you are in town, the technician comes to your door, driveway or parking space. We serve the 91307 and 91304 ZIP codes.
West Hills sits against the Simi Hills at the Valley’s western edge, a suburban area of 1960s-to-1980s homes with side gates, pool gates and patio sliders that all need dependable locks.
If you are out and about near Orcutt Ranch Horticultural Center, El Escorpión Park, Bell Canyon Park, West Hills Hospital, or Fallbrook Center, give us that location when you call and wait somewhere safe and visible. Technicians usually reach West Hills by US-101, Valley Circle Boulevard, Fallbrook Avenue, Roscoe Boulevard, Victory Boulevard, and Sherman Way. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
Our door closer repair process, step by step
Discuss the need and the site
We ask about the type of business, the doors involved and any deadline, such as an inspection, a tenant move-in or a termination. Photos of the doors help us arrive with the right parts.
Verify authority
Work on a commercial property is done for the owner, the tenant of record, or the property manager. We confirm that before any lock is opened or changed.
Survey the openings
Each door is checked for lock type and function, closer, hinges or pivots, exit hardware and fire rating, so the solution fits both the security need and the code.
Agree scope and price
You receive a clear scope: which doors, what hardware, how many keys, and the cost. For key systems we draft the hierarchy for your approval first.
Carry out the work around your schedule
Rekeys, repairs and installations are done before opening, after closing or during quiet hours when that suits the business better.
Test, document and hand over
Every door is tested for locking, latching and free exit. Keys are stamped and counted, and for master systems you receive a record of what opens what.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Common situations in West Hills
- A manager is let go and returns only some of the keys issued.
- The back door shows pry marks around the latch after the weekend.
- A closer has failed and the front door slams hard enough to rattle the glass.
- The storefront door will not latch and the shop cannot be left for the night.
- Staff need access to the sales floor but not the office, stockroom or IT closet.
- You are taking over a suite and need the previous tenant’s keys cut off before move-in.
- A fire inspection notes that the rear exit has a slide bolt and no panic hardware.
Equipment and hardware on the van
Commercial doors use purpose-built hardware. Aluminum storefronts typically carry Adams Rite-style deadlatches and hook bolts driven by a mortise cylinder. Hollow metal and wood doors use Grade 1 cylindrical levers or mortise locks from makers such as Schlage, Sargent, Corbin Russwin and Yale. Exits use panic and fire exit devices, and closers from LCN, Norton and similar makers control the swing. Interchangeable cores allow fast rekeying. We stock the common cylinders, cams, tailpieces, lock bodies and closers.
Terms worth knowing
- Master key system
- A planned arrangement in which each lock has its own key and a master key opens all of them.
- Lock function
- How a lock behaves, such as entry, storeroom, classroom or passage, which determines when it is locked and who can lock it.
- Mortise lock
- A heavy-duty lock housed in a pocket cut into the door edge, combining latch and deadbolt in one case.
- Interchangeable core
- A removable lock core that a control key releases, allowing a door to be rekeyed in seconds.
- Cylindrical lock
- A lock installed through a round bore in the door, with the mechanism in the lever or knob assembly.
- Restricted keyway
- A key profile whose blanks are supplied only to authorized locksmiths, preventing unauthorized copies.
- Door closer
- A hydraulic device that closes a door at a controlled speed and holds it latched.
- Exit device
- Panic or fire exit hardware that unlatches a door when the horizontal bar is pushed.
Cost factors for door closer repair service
- Code and fire-rating requirements
- Fire-rated openings need listed hardware, and exits may need panic devices. Compliance can dictate the product.
- Hardware grade and function
- Grade 1 mortise locks and exit devices cost more than cylindrical levers, and they last far longer on busy doors.
- Restricted or high-security keys
- Patented keyways and high-security cylinders cost more per cylinder and per key, in exchange for real control over duplication.
- Key system complexity
- A simple rekey to one key is quick. A master or grand master system takes planning, more pinning time and record keeping.
- Number and type of doors
- Aluminum storefront doors, hollow metal doors and wood office doors use different hardware. Pricing reflects how many openings are involved and what each requires.
- After-hours scheduling
- Work outside normal hours avoids disruption and may be priced differently. We quote both where it matters.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to West Hills. The technician confirms the figure before starting.
Why call Big Daddy Car Key Replacement
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to West Hills.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.

Tips to avoid problems
- Store spare keys in a locked key cabinet, not a desk drawer.
- Fit latch guards on out-swinging back doors, where the latch is exposed to prying.
- Test exit devices and door closers monthly. A door that does not latch is an unlocked door.
- Use a restricted keyway if staff copying keys is a concern. A "Do Not Duplicate" stamp alone does not prevent copies.
- Never chain, padlock or bolt a required exit door while the building is occupied.
- Keep a written key log: who holds which key, and the date it was issued and returned.
- Have storefront pivots and closers serviced before the door starts dragging. It is cheaper than replacing a damaged lock.
- Give each employee access only to the doors their job requires.
Why this is a job for a locksmith
Commercial doors are regulated in ways that homes are not. The wrong lock function can trap someone inside a storeroom, a deadbolt on an exit can fail an inspection or cost a life, and unlisted hardware can void a fire door’s rating. A commercial locksmith knows the functions, the grades and the applicable codes, keeps your key system mathematically sound, and documents the work so the next change is straightforward.
What we commit to
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Choosing a locksmith: a short checklist
- Get an itemized receipt showing labor, parts and the business details.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
Before you call (562) 550-7206
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
After the visit
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in West Hills
Customers who need door closer repair service often ask about these as well. Each can usually be handled in the same visit to West Hills.
- Cash Drawer Lock Replacement
Replacing locks on registers, cash drawers and POS stations.
- Door Closer Installation
Installing hydraulic door closers on commercial doors.
- Mortise Lock Repair
Repairing or replacing worn, jammed or damaged mortise lock systems.
- Restricted Key Systems
Installing key systems that prevent unauthorized key duplication.
- Grand Master Key Systems
Advanced access control where one top-level key opens multiple buildings or departments.
- Storefront Lock Repair
Repairing locks on glass storefront doors, aluminum doors and commercial entryways.
- High-Security Commercial Locks
Installing restricted keyway locks, pick-resistant locks, drill-resistant locks and bump-resistant lock systems.
- Commercial Locksmith
Lock, key, door hardware and access control service for offices, stores, restaurants, warehouses and multi-tenant buildings.
- Commercial Lock Installation
Installing heavy-duty locks for business properties.
- Warehouse Locksmith Service
Heavy-duty locks, roll-up door locks, padlocks, access control and master key systems.
- Automotive Locksmith
Mobile key, lock and ignition service for cars, trucks, SUVs, vans, motorcycles and fleets.
- Car Lockout
Unlocking vehicles when keys are locked inside.
- Key Fob Replacement
Replacing remote key fobs for cars, trucks, SUVs and vans.
- Residential Locksmith
Complete lock and key service for houses, apartments, condos and rental properties.
- Gate Lock Repair
Fixing stuck, broken, rusted or misaligned gate locks and latches.
Door Closer Repair near West Hills
We provide the same door closer repair service in the communities around West Hills. See the main door closer repair page or the full list of service areas.
- Door Closer Repair in Hidden Hills
- Door Closer Repair in Canoga Park
- Door Closer Repair in Woodland Hills
- Door Closer Repair in Winnetka
- Door Closer Repair in Calabasas
- Door Closer Repair in Chatsworth
- Door Closer Repair in Tarzana
- Door Closer Repair in Reseda
- Door Closer Repair in Northridge
- Door Closer Repair in Agoura Hills
- Door Closer Repair in Topanga
- Door Closer Repair in Porter Ranch
Door Closer Repair in West Hills: frequently asked questions
Can a leaking door closer be repaired?
No. Once hydraulic fluid leaks, the closer has lost its damping and should be replaced. If there is no leak, slamming or slow closing can almost always be corrected by adjusting the valves.
Are our exit doors compliant?
We can check that exit doors open with one motion and no key, that panic hardware is present where required, and that closers latch the doors. Final authority rests with your fire marshal or building official.
Do you offer ongoing service for multiple locations?
Yes. We service multi-site businesses and managed properties across our service area and keep key records so later changes are fast.
How long does it take to rekey a business?
A small shop or office with a handful of doors usually takes about an hour. Larger sites and master key systems are scheduled by scope.
Can you work outside our business hours in West Hills?
Yes. We are open 24 hours and regularly schedule rekeys, repairs and installations before opening or after closing so customers and staff are not disturbed.
Can you provide documentation for our records?
Yes. For rekeys and key systems we provide a key schedule listing doors, key numbers and the quantity of keys issued.
Who is allowed to authorize lock changes for a business?
The owner, the tenant named on the lease, or the property manager. We verify authority before changing or opening any commercial lock.
What brands of commercial hardware do you service?
We work with the major commercial lines, including Schlage, Sargent, Corbin Russwin, Yale, Best, Adams Rite, Von Duprin, LCN, Norton and Kaba, and can match most existing hardware.
Do you have a locksmith shop in West Hills?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout West Hills and the rest of the San Fernando Valley area. All work is done at your location.
Is there a travel charge for West Hills?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to West Hills, so you know the cost in advance.
Which parts of West Hills do you serve?
All of West Hills, including the Valley Circle hills, the Fallbrook corridor, the Platt Avenue corridor, and the Bell Canyon gateway, and addresses in ZIP codes 91307 and 91304.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
