Quick answer
Commercial Door Hardware: Supplying and installing commercial-grade levers, pulls, hinges, closers, exit devices, strikes and protective plates. Big Daddy Car Key Replacement provides commercial door hardware service in Westmont as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Commercial Door Hardware
- Area
- Westmont, Los Angeles County, CA (90044, 90047)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Commercial Locksmith Services
- Phone
- (562) 550-7206
On this page
- What commercial door hardware involves
- Who uses this service
- When you need commercial door hardware service
- Commercial Door Hardware across Westmont
- What happens when you call
- Common situations in Westmont
- Tools, parts and hardware we carry
- A short glossary
- What affects the cost of commercial door hardware service
- What you can expect from us
- Practical advice from our locksmiths
- Doing it yourself versus calling a professional
- Our service standards
- How to choose a locksmith you can trust
- Before you call (562) 550-7206
- Once the work is done
- Related locksmith services in Westmont
- Commercial Door Hardware near Westmont
- Commercial Door Hardware in Westmont: frequently asked questions
What commercial door hardware involves
Supplying and installing commercial-grade levers, pulls, hinges, closers, exit devices, strikes and protective plates. Commercial door hardware is specified by opening: the right hinge type and count, a closer, a lock or exit device with the correct function, and protection such as kick plates and latch guards. We supply and install complete hardware sets for tenant improvements and replace individual components that have worn out.

Every business in Westmont eventually faces the same questions. Who has keys? Do the exit doors work? Would the back door survive a pry bar? Our commercial door hardware service gives practical answers and carries out the work, usually in a single visit and with as little disruption as possible.
Who uses this service
Our commercial customers in Westmont include retail shops, restaurants, offices, medical and dental practices, warehouses, schools, places of worship, property management companies and homeowners associations. Some need a one-time rekey after a staffing change, others an ongoing arrangement covering key systems, exit hardware and door maintenance across several sites.
This service is part of our commercial locksmith services in Westmont.
When you need commercial door hardware service
People in Westmont usually call us for commercial door hardware service in situations like these:
- A build-out needs complete hardware sets
- Hardware finishes or functions do not match
- Doors lack kick plates or latch protection
- Hinges are worn and doors are sagging
Commercial Door Hardware across Westmont
Westmont is an unincorporated community in Los Angeles County, part of the Central & South Los Angeles area we cover every day. Customers anywhere in Westmont, including the Western Avenue corridor, the Vermont Avenue corridor, and the Century Boulevard corridor, can have a mobile technician sent directly to them. We serve the 90044 and 90047 ZIP codes.
Westmont is an unincorporated South Los Angeles neighborhood of 1920s-to-1940s houses and courtyard apartments, where reinforced strike plates, security doors and solid deadbolts are common upgrades.
Whether you are at home, at work, or stuck near Jesse Owens Community Regional Park, Woodcrest Library, the Vermont Avenue business corridor, or the neighboring Los Angeles Southwest College, tell the dispatcher the nearest landmark and we will find you. Technicians usually reach Westmont by I-105, I-110, Western Avenue, Vermont Avenue, Normandie Avenue, and Century Boulevard. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
What happens when you call
Discuss the need and the site
We ask about the type of business, the doors involved and any deadline, such as an inspection, a tenant move-in or a termination. Photos of the doors help us arrive with the right parts.
Verify authority
Work on a commercial property is done for the owner, the tenant of record, or the property manager. We confirm that before any lock is opened or changed.
Survey the openings
Each door is checked for lock type and function, closer, hinges or pivots, exit hardware and fire rating, so the solution fits both the security need and the code.
Agree scope and price
You receive a clear scope: which doors, what hardware, how many keys, and the cost. For key systems we draft the hierarchy for your approval first.
Carry out the work around your schedule
Rekeys, repairs and installations are done before opening, after closing or during quiet hours when that suits the business better.
Test, document and hand over
Every door is tested for locking, latching and free exit. Keys are stamped and counted, and for master systems you receive a record of what opens what.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Common situations in Westmont
- The storefront door will not latch and the shop cannot be left for the night.
- You are taking over a suite and need the previous tenant’s keys cut off before move-in.
- A fire inspection notes that the rear exit has a slide bolt and no panic hardware.
- A closer has failed and the front door slams hard enough to rattle the glass.
- Staff need access to the sales floor but not the office, stockroom or IT closet.
- The back door shows pry marks around the latch after the weekend.
- A manager is let go and returns only some of the keys issued.
Tools, parts and hardware we carry
Commercial doors use purpose-built hardware. Aluminum storefronts typically carry Adams Rite-style deadlatches and hook bolts driven by a mortise cylinder. Hollow metal and wood doors use Grade 1 cylindrical levers or mortise locks from makers such as Schlage, Sargent, Corbin Russwin and Yale. Exits use panic and fire exit devices, and closers from LCN, Norton and similar makers control the swing. Interchangeable cores allow fast rekeying. We stock the common cylinders, cams, tailpieces, lock bodies and closers.
A short glossary
- Exit device
- Panic or fire exit hardware that unlatches a door when the horizontal bar is pushed.
- Master key system
- A planned arrangement in which each lock has its own key and a master key opens all of them.
- Cylindrical lock
- A lock installed through a round bore in the door, with the mechanism in the lever or knob assembly.
- Mortise lock
- A heavy-duty lock housed in a pocket cut into the door edge, combining latch and deadbolt in one case.
- Restricted keyway
- A key profile whose blanks are supplied only to authorized locksmiths, preventing unauthorized copies.
- Lock function
- How a lock behaves, such as entry, storeroom, classroom or passage, which determines when it is locked and who can lock it.
- Interchangeable core
- A removable lock core that a control key releases, allowing a door to be rekeyed in seconds.
- Door closer
- A hydraulic device that closes a door at a controlled speed and holds it latched.
What affects the cost of commercial door hardware service
- Key system complexity
- A simple rekey to one key is quick. A master or grand master system takes planning, more pinning time and record keeping.
- Number and type of doors
- Aluminum storefront doors, hollow metal doors and wood office doors use different hardware. Pricing reflects how many openings are involved and what each requires.
- Code and fire-rating requirements
- Fire-rated openings need listed hardware, and exits may need panic devices. Compliance can dictate the product.
- Hardware grade and function
- Grade 1 mortise locks and exit devices cost more than cylindrical levers, and they last far longer on busy doors.
- Electrified hardware
- Doors tied to access control, electric strikes or maglocks need wiring and coordination that add time.
- After-hours scheduling
- Work outside normal hours avoids disruption and may be priced differently. We quote both where it matters.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Westmont. The technician confirms the figure before starting.
What you can expect from us
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.

Practical advice from our locksmiths
- Have storefront pivots and closers serviced before the door starts dragging. It is cheaper than replacing a damaged lock.
- Keep a written key log: who holds which key, and the date it was issued and returned.
- Consider keypad or card access for doors with frequent staff turnover.
- Fit latch guards on out-swinging back doors, where the latch is exposed to prying.
- Store spare keys in a locked key cabinet, not a desk drawer.
- Use a restricted keyway if staff copying keys is a concern. A "Do Not Duplicate" stamp alone does not prevent copies.
- Never chain, padlock or bolt a required exit door while the building is occupied.
- Give each employee access only to the doors their job requires.
Doing it yourself versus calling a professional
Commercial doors are regulated in ways that homes are not. The wrong lock function can trap someone inside a storeroom, a deadbolt on an exit can fail an inspection or cost a life, and unlisted hardware can void a fire door’s rating. A commercial locksmith knows the functions, the grades and the applicable codes, keeps your key system mathematically sound, and documents the work so the next change is straightforward.
Our service standards
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
How to choose a locksmith you can trust
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Get an itemized receipt showing labor, parts and the business details.
Before you call (562) 550-7206
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Once the work is done
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Westmont
Customers who need commercial door hardware service often ask about these as well. Each can usually be handled in the same visit to Westmont.
- Commercial Lock Installation
Installing heavy-duty locks for business properties.
- High-Security Commercial Locks
Installing restricted keyway locks, pick-resistant locks, drill-resistant locks and bump-resistant lock systems.
- Commercial Lock Change
Replacing commercial-grade locks on offices, entry doors, back doors, storage rooms and restricted areas.
- Desk Lock Repair
Repairing locks for desks, drawers and office furniture.
- Storefront Lock Repair
Repairing locks on glass storefront doors, aluminum doors and commercial entryways.
- Door Closer Repair
Adjusting or repairing doors that slam, close too slowly, do not latch or stay open.
- Mortise Lock Repair
Repairing or replacing worn, jammed or damaged mortise lock systems.
- Restaurant Locksmith Service
Lockouts, rekeys, panic bars, door closers, storefront locks and access control for restaurants.
- Grand Master Key Systems
Advanced access control where one top-level key opens multiple buildings or departments.
- Apartment Building Locksmith
Common area locks, unit rekeys, mailbox locks, access control, gate locks and emergency exit hardware.
- Emergency Locksmith
Urgent lock and key help for homes, businesses and vehicles at any hour.
- Car Lockout
Unlocking vehicles when keys are locked inside.
- Deadbolt Installation
Installing single-cylinder, double-cylinder, high-security or smart deadbolts.
- Mobile Locksmith
A locksmith that comes directly to the customer’s location.
- Ignition Repair
Repairing ignition cylinders that are stuck, worn or will not turn.
Commercial Door Hardware near Westmont
We provide the same commercial door hardware service in the communities around Westmont. See the main commercial door hardware page or the full list of service areas.
- Commercial Door Hardware in Athens
- Commercial Door Hardware in Willowbrook
- Commercial Door Hardware in Inglewood
- Commercial Door Hardware in Hawthorne
- Commercial Door Hardware in Gardena
- Commercial Door Hardware in View Park–Windsor Hills
- Commercial Door Hardware in Lawndale
- Commercial Door Hardware in Huntington Park
- Commercial Door Hardware in South Gate
- Commercial Door Hardware in Lynwood
- Commercial Door Hardware in Ladera Heights
- Commercial Door Hardware in Compton
Commercial Door Hardware in Westmont: frequently asked questions
What hardware does a commercial door need?
Typically hinges or pivots rated for the door’s weight, a closer, a Grade 1 lock or exit device with the right function, a strike, and weatherstripping and threshold on exterior doors. Fire-rated doors need labeled hardware throughout.
Do you offer ongoing service for multiple locations?
Yes. We service multi-site businesses and managed properties across our service area and keep key records so later changes are fast.
How long does it take to rekey a business?
A small shop or office with a handful of doors usually takes about an hour. Larger sites and master key systems are scheduled by scope.
How do we stop employees from copying keys?
Install a restricted key system. Its blanks are available only through the authorized locksmith and copies are cut only for people on your signature list.
Who is allowed to authorize lock changes for a business?
The owner, the tenant named on the lease, or the property manager. We verify authority before changing or opening any commercial lock.
What brands of commercial hardware do you service?
We work with the major commercial lines, including Schlage, Sargent, Corbin Russwin, Yale, Best, Adams Rite, Von Duprin, LCN, Norton and Kaba, and can match most existing hardware.
Are our exit doors compliant?
We can check that exit doors open with one motion and no key, that panic hardware is present where required, and that closers latch the doors. Final authority rests with your fire marshal or building official.
Can you work outside our business hours in Westmont?
Yes. We are open 24 hours and regularly schedule rekeys, repairs and installations before opening or after closing so customers and staff are not disturbed.
Can you make car keys in Westmont?
Yes. We cut and program car keys on site anywhere in Westmont, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Do you have a locksmith shop in Westmont?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Westmont and the rest of the Central & South Los Angeles area. All work is done at your location.
Is there a travel charge for Westmont?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Westmont, so you know the cost in advance.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
Which areas do you cover?
We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
