Quick answer
Panic Bar Installation: Installing panic bars, push bars and crash bars for emergency exits. Big Daddy Car Key Replacement provides panic bar installation service in Westmont as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Panic Bar Installation
- Area
- Westmont, Los Angeles County, CA (90044, 90047)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Commercial Locksmith Services
- Phone
- (562) 550-7206
On this page
- What panic bar installation involves
- Customers we serve in Westmont
- Reasons to call for panic bar installation service
- Panic Bar Installation across Westmont
- How our panic bar installation service works
- Situations we handle regularly
- Equipment and hardware on the van
- Trade terms explained
- What affects the cost of panic bar installation service
- Why Westmont customers choose Big Daddy
- Tips to avoid problems
- Doing it yourself versus calling a professional
- What we commit to
- How to choose a locksmith you can trust
- What to have ready when you call
- Once the work is done
- Related locksmith services in Westmont
- Panic Bar Installation near Westmont
- Panic Bar Installation in Westmont: frequently asked questions
What panic bar installation involves
Installing panic bars, push bars and crash bars for emergency exits. A panic bar lets anyone open an exit door by pushing a horizontal bar, with no key or special knowledge, which is what building and fire codes require on many exits. We install rim, mortise and vertical-rod devices, match fire-rated doors with fire exit hardware, and add outside trim or an alarm where needed.

Every business in Westmont eventually faces the same questions. Who has keys? Do the exit doors work? Would the back door survive a pry bar? Our panic bar installation service gives practical answers and carries out the work, usually in a single visit and with as little disruption as possible.
Customers we serve in Westmont
Our commercial customers in Westmont include retail shops, restaurants, offices, medical and dental practices, warehouses, schools, places of worship, property management companies and homeowners associations. Some need a one-time rekey after a staffing change, others an ongoing arrangement covering key systems, exit hardware and door maintenance across several sites.
This service is part of our commercial locksmith services in Westmont.
Reasons to call for panic bar installation service
If any of the following sounds familiar, panic bar installation service is likely what you need:
- An inspector required panic hardware on an exit
- An exit is secured with a deadbolt or padlock
- You are opening an assembly or retail space
- A back door needs to lock from outside but open freely from inside
Panic Bar Installation across Westmont
Westmont is an unincorporated community in Los Angeles County, part of the Central & South Los Angeles area we cover every day. Customers anywhere in Westmont, including the Western Avenue corridor, the Vermont Avenue corridor, and the Century Boulevard corridor, can have a mobile technician sent directly to them. Service is available throughout ZIP codes 90044 and 90047.
Westmont is an unincorporated South Los Angeles neighborhood of 1920s-to-1940s houses and courtyard apartments, where reinforced strike plates, security doors and solid deadbolts are common upgrades.
Whether you are at home, at work, or stuck near Jesse Owens Community Regional Park, Woodcrest Library, the Vermont Avenue business corridor, or the neighboring Los Angeles Southwest College, tell the dispatcher the nearest landmark and we will find you. Westmont is served by I-105, I-110, Western Avenue, Vermont Avenue, Normandie Avenue, and Century Boulevard, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
How our panic bar installation service works
Discuss the need and the site
We ask about the type of business, the doors involved and any deadline, such as an inspection, a tenant move-in or a termination. Photos of the doors help us arrive with the right parts.
Verify authority
Work on a commercial property is done for the owner, the tenant of record, or the property manager. We confirm that before any lock is opened or changed.
Survey the openings
Each door is checked for lock type and function, closer, hinges or pivots, exit hardware and fire rating, so the solution fits both the security need and the code.
Agree scope and price
You receive a clear scope: which doors, what hardware, how many keys, and the cost. For key systems we draft the hierarchy for your approval first.
Carry out the work around your schedule
Rekeys, repairs and installations are done before opening, after closing or during quiet hours when that suits the business better.
Test, document and hand over
Every door is tested for locking, latching and free exit. Keys are stamped and counted, and for master systems you receive a record of what opens what.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Situations we handle regularly
- The storefront door will not latch and the shop cannot be left for the night.
- A fire inspection notes that the rear exit has a slide bolt and no panic hardware.
- Staff need access to the sales floor but not the office, stockroom or IT closet.
- A manager is let go and returns only some of the keys issued.
- You are taking over a suite and need the previous tenant’s keys cut off before move-in.
- A closer has failed and the front door slams hard enough to rattle the glass.
- The back door shows pry marks around the latch after the weekend.
Equipment and hardware on the van
Commercial doors use purpose-built hardware. Aluminum storefronts typically carry Adams Rite-style deadlatches and hook bolts driven by a mortise cylinder. Hollow metal and wood doors use Grade 1 cylindrical levers or mortise locks from makers such as Schlage, Sargent, Corbin Russwin and Yale. Exits use panic and fire exit devices, and closers from LCN, Norton and similar makers control the swing. Interchangeable cores allow fast rekeying. We stock the common cylinders, cams, tailpieces, lock bodies and closers.
Trade terms explained
- Mortise lock
- A heavy-duty lock housed in a pocket cut into the door edge, combining latch and deadbolt in one case.
- Restricted keyway
- A key profile whose blanks are supplied only to authorized locksmiths, preventing unauthorized copies.
- Door closer
- A hydraulic device that closes a door at a controlled speed and holds it latched.
- Cylindrical lock
- A lock installed through a round bore in the door, with the mechanism in the lever or knob assembly.
- Master key system
- A planned arrangement in which each lock has its own key and a master key opens all of them.
- Interchangeable core
- A removable lock core that a control key releases, allowing a door to be rekeyed in seconds.
- Lock function
- How a lock behaves, such as entry, storeroom, classroom or passage, which determines when it is locked and who can lock it.
- Exit device
- Panic or fire exit hardware that unlatches a door when the horizontal bar is pushed.
What affects the cost of panic bar installation service
- Restricted or high-security keys
- Patented keyways and high-security cylinders cost more per cylinder and per key, in exchange for real control over duplication.
- Code and fire-rating requirements
- Fire-rated openings need listed hardware, and exits may need panic devices. Compliance can dictate the product.
- Number and type of doors
- Aluminum storefront doors, hollow metal doors and wood office doors use different hardware. Pricing reflects how many openings are involved and what each requires.
- Hardware grade and function
- Grade 1 mortise locks and exit devices cost more than cylindrical levers, and they last far longer on busy doors.
- Electrified hardware
- Doors tied to access control, electric strikes or maglocks need wiring and coordination that add time.
- After-hours scheduling
- Work outside normal hours avoids disruption and may be priced differently. We quote both where it matters.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Westmont. The technician confirms the figure before starting.
Why Westmont customers choose Big Daddy
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Westmont.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.

Tips to avoid problems
- Store spare keys in a locked key cabinet, not a desk drawer.
- Test exit devices and door closers monthly. A door that does not latch is an unlocked door.
- Consider keypad or card access for doors with frequent staff turnover.
- Use a restricted keyway if staff copying keys is a concern. A "Do Not Duplicate" stamp alone does not prevent copies.
- Rekey whenever a keyholder leaves on poor terms or a key cannot be accounted for.
- Fit latch guards on out-swinging back doors, where the latch is exposed to prying.
- Have storefront pivots and closers serviced before the door starts dragging. It is cheaper than replacing a damaged lock.
- Never chain, padlock or bolt a required exit door while the building is occupied.
Doing it yourself versus calling a professional
Commercial doors are regulated in ways that homes are not. The wrong lock function can trap someone inside a storeroom, a deadbolt on an exit can fail an inspection or cost a life, and unlisted hardware can void a fire door’s rating. A commercial locksmith knows the functions, the grades and the applicable codes, keeps your key system mathematically sound, and documents the work so the next change is straightforward.
What we commit to
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
How to choose a locksmith you can trust
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Get an itemized receipt showing labor, parts and the business details.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
What to have ready when you call
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Once the work is done
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Westmont
Customers who need panic bar installation service often ask about these as well. Each can usually be handled in the same visit to Westmont.
- Office Building Locksmith
Master key systems, access control, door hardware, lock repairs and tenant suite rekeys.
- Master Key System
Creating a key hierarchy where owners, managers and employees have different levels of access.
- Grand Master Key Systems
Advanced access control where one top-level key opens multiple buildings or departments.
- Commercial Locksmith
Lock, key, door hardware and access control service for offices, stores, restaurants, warehouses and multi-tenant buildings.
- Panic Bar Repair
Repairing panic bars that stick, fail to latch, alarm or do not open correctly.
- File Cabinet Lock Replacement
Replacing locks on filing cabinets, desks and office storage.
- High-Security Commercial Locks
Installing restricted keyway locks, pick-resistant locks, drill-resistant locks and bump-resistant lock systems.
- Retail Store Locksmith Service
Lock repair, rekeying, high-security locks and emergency unlocking for retail stores.
- Rim Cylinder Replacement
Replacing rim cylinders used with panic bars, exit devices and commercial doors.
- Door Closer Installation
Installing hydraulic door closers on commercial doors.
- Lock Installation
Installing new locks on doors that need added security, including exterior doors, bedroom doors, home offices, gates and garage access doors.
- Car Locksmith
On-site car key, lockout and ignition help wherever the vehicle is parked.
- Transponder Key Programming
Programming chip keys for vehicles with immobilizer systems.
- High Security Locks
Locks engineered to resist picking, bumping, drilling and unauthorized key copying.
- Safe Locksmith
Opening, repairing, servicing and changing combinations on home and business safes.
Panic Bar Installation near Westmont
We provide the same panic bar installation service in the communities around Westmont. See the main panic bar installation page or the full list of service areas.
- Panic Bar Installation in Athens
- Panic Bar Installation in Willowbrook
- Panic Bar Installation in Inglewood
- Panic Bar Installation in Hawthorne
- Panic Bar Installation in Gardena
- Panic Bar Installation in View Park–Windsor Hills
- Panic Bar Installation in Lawndale
- Panic Bar Installation in Huntington Park
- Panic Bar Installation in South Gate
- Panic Bar Installation in Lynwood
- Panic Bar Installation in Ladera Heights
- Panic Bar Installation in Compton
Panic Bar Installation in Westmont: frequently asked questions
When is a panic bar required?
Model codes used in California generally require panic hardware on exit doors serving assembly and educational occupancies with 50 or more occupants and certain hazardous areas. Your local fire marshal or building official makes the final determination for your space.
Are our exit doors compliant?
We can check that exit doors open with one motion and no key, that panic hardware is present where required, and that closers latch the doors. Final authority rests with your fire marshal or building official.
How long does it take to rekey a business?
A small shop or office with a handful of doors usually takes about an hour. Larger sites and master key systems are scheduled by scope.
Can you work outside our business hours in Westmont?
Yes. We are open 24 hours and regularly schedule rekeys, repairs and installations before opening or after closing so customers and staff are not disturbed.
Can you provide documentation for our records?
Yes. For rekeys and key systems we provide a key schedule listing doors, key numbers and the quantity of keys issued.
Who is allowed to authorize lock changes for a business?
The owner, the tenant named on the lease, or the property manager. We verify authority before changing or opening any commercial lock.
What brands of commercial hardware do you service?
We work with the major commercial lines, including Schlage, Sargent, Corbin Russwin, Yale, Best, Adams Rite, Von Duprin, LCN, Norton and Kaba, and can match most existing hardware.
How do we stop employees from copying keys?
Install a restricted key system. Its blanks are available only through the authorized locksmith and copies are cut only for people on your signature list.
Are you open 24 hours in Westmont?
Yes. We take calls and dispatch to Westmont 24 hours a day, including weekends and holidays.
Can you make car keys in Westmont?
Yes. We cut and program car keys on site anywhere in Westmont, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Do you have a locksmith shop in Westmont?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Westmont and the rest of the Central & South Los Angeles area. All work is done at your location.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County and Ventura County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
