Quick answer
Magnetic Lock Installation: Installing maglocks for controlled entry doors. Big Daddy Car Key Replacement provides magnetic lock installation service in Whittier as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Magnetic Lock Installation
- Area
- Whittier, Los Angeles County, CA (90601, 90602, 90603, 90604, 90605, 90606)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Access Control & Electronic Lock Services
- Phone
- (562) 550-7206
On this page
- About our magnetic lock installation service
- Who uses this service
- When you need magnetic lock installation service
- Magnetic Lock Installation across Whittier
- What happens when you call
- Common situations in Whittier
- Equipment and hardware on the van
- Trade terms explained
- How magnetic lock installation service is priced
- What you can expect from us
- Practical advice from our locksmiths
- Professional service compared with doing it yourself
- How we work on every job
- Questions to ask any locksmith
- How to prepare for the visit
- After the visit
- Related locksmith services in Whittier
- Magnetic Lock Installation near Whittier
- Magnetic Lock Installation in Whittier: frequently asked questions
About our magnetic lock installation service
Installing maglocks for controlled entry doors. A maglock holds a door with an electromagnet, commonly rated at 600 or 1,200 pounds, and releases when power is cut. Because it is fail-safe, code requires reliable ways to get out: typically a motion sensor and a push-to-exit button, plus release on fire alarm. We install maglocks with the required egress devices.

Codes, cards, fobs and phones have made keys optional. For magnetic lock installation service in Whittier, call (562) 550-7206. We help you choose equipment that fits the door and the way people use it, install it, and make sure there is always a way in if batteries or power fail.
Who uses this service
Electronic lock and access control customers in Whittier range from households that want to stop hiding keys, to short-term rental hosts issuing guest codes, to offices, clinics, gyms, apartment buildings and warehouses that need to control and record who enters.
This service is part of our access control & electronic lock services in Whittier.
When you need magnetic lock installation service
People in Whittier usually call us for magnetic lock installation service in situations like these:
- A glass or aluminum door has no room for a strike
- A gate needs electric locking
- You need a door that releases on fire alarm
- An existing maglock no longer holds
Magnetic Lock Installation across Whittier
Whittier is an incorporated city in Los Angeles County, part of the Gateway Cities area we cover every day. Our magnetic lock installation service reaches all of Whittier, including Uptown Whittier, East Whittier, Friendly Hills, the Hadley-Greenleaf historic district, South Whittier, and West Whittier, as well as the streets in between. You do not need to bring anything to a shop. That includes addresses in ZIP codes 90601, 90602, 90603, 90604, 90605, and 90606.
Whittier has one of the region’s best-preserved historic cores, with Craftsman and Victorian homes Uptown and mid-century ranches in Friendly Hills, so antique lock repair and modern upgrades go hand in hand.
People call us from all over Whittier, including the areas around Uptown Whittier, Whittier College, The Quad at Whittier, Whittwood Town Center, and Pio Pico State Historic Park. A landmark or cross street helps the technician reach you quickly. Depending on where the closest technician is, the drive into Whittier follows I-605, I-5, Whittier Boulevard, Painter Avenue, Colima Road, and Beverly Boulevard. You get a realistic arrival estimate when you call.
What happens when you call
Discuss how the door is used
Who needs access, how often people change, whether remote control or an entry log is needed, and what the door is made of all shape the right choice.
Check the door and the site
We measure door thickness, backset and bore, check alignment and weather exposure, and for networked products test Wi-Fi strength at the door or plan the wiring.
Recommend equipment
You get a recommendation with the trade-offs explained: keypad or app, Bluetooth or Wi-Fi, standalone or networked, and the cost of each.
Install the hardware
The door is aligned so the bolt moves freely, then the lock, reader, strike or maglock is fitted to the manufacturer’s template and wired or powered.
Program users and settings
Default codes are removed, individual users are created, schedules and auto-lock are set, and firmware is updated.
Train and document
We walk you through adding and deleting users, changing batteries and using the mechanical override, and leave the settings documented.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Common situations in Whittier
- An office wants to stop rekeying each time an employee leaves.
- A smart lock reports "jammed" every evening when the door swells.
- An apartment building wants to replace a shared entry key with fobs.
- A business needs to know who entered the stockroom and when.
- A short-term rental needs a new code for every guest.
- A homeowner wants to let a contractor in while at work.
- Children get home from school before their parents and keep losing keys.
Equipment and hardware on the van
We install and service keypad and smart deadbolts and levers from the major residential makers such as Schlage, Yale, Kwikset and August, and commercial electronic locks and access components including standalone keypad levers, card and fob readers, controllers, electric strikes, electromagnetic locks, request-to-exit sensors, push-to-exit buttons, power supplies with battery backup and door position switches. Matching each component to the door is what makes a system reliable.
Trade terms explained
- Smart lock
- A lock that can be operated by a code, phone or other credential, often with remote control.
- Electric strike
- A strike plate with a keeper that releases electrically so a locked door can be pushed open.
- Audit trail
- A stored record of which credential opened a door and when.
- Maglock
- An electromagnetic lock that holds a door closed with a magnet and releases when power is cut.
- Fail-safe and fail-secure
- A fail-safe lock unlocks when power is lost; a fail-secure lock stays locked.
- Credential
- Whatever identifies a user: a card, fob, PIN, phone or fingerprint.
- Request to exit
- A sensor or button that releases an electrically locked door for someone leaving.
- Access control
- A system that decides who may pass through which door at what time, and records each entry.
How magnetic lock installation service is priced
- Door condition
- Doors that bind must be corrected first. Motorized locks cannot overcome friction that a hand can.
- Software and credentials
- Cloud subscriptions, cards and fobs are ongoing or per-user costs worth understanding at the start.
- Number of doors
- Each controlled door needs its own lock hardware and, for wired systems, cabling back to a controller.
- Wiring and power
- Running cable, adding power supplies and battery backup takes time, especially in finished buildings.
- Grade of hardware
- Commercial Grade 1 electronic locks cost more than residential models and are built for far heavier use.
- Life-safety requirements
- Maglocks and controlled exits need release devices and sometimes fire alarm connections to meet code.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Whittier. The technician confirms the figure before starting.
What you can expect from us
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Whittier.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.

Practical advice from our locksmiths
- Avoid obvious codes such as birth years, addresses or repeated digits.
- Keep firmware up to date. Updates often fix security issues.
- Delete factory default codes on the day of installation.
- Check that the door closes and latches on its own. Auto-lock cannot secure a door that is ajar.
- Use fresh, name-brand alkaline batteries. Many locks misread rechargeable cells.
- Turn on two-factor authentication for any account that can unlock your door.
- Wipe touchscreens occasionally so smudges do not reveal the digits in your code.
- Give each person their own code or credential so access can be removed individually.
Professional service compared with doing it yourself
Most complaints about electronic locks trace back to installation: a door out of alignment, a strike that pinches the bolt, a Wi-Fi bridge out of range, default codes left active, or a maglock installed without the release devices the code requires. A locksmith addresses the mechanical side first, then the electronics, and leaves a system that works every day and still lets people out safely when power is lost.
How we work on every job
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Questions to ask any locksmith
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Get an itemized receipt showing labor, parts and the business details.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
How to prepare for the visit
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
After the visit
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Whittier
Customers who need magnetic lock installation service often ask about these as well. Each can usually be handled in the same visit to Whittier.
- Electronic Lock Installation
Installing electronic locks for homes and businesses.
- Commercial Access Control Maintenance
Servicing card readers, fobs, electric strikes, maglocks and controllers.
- Smart Lock Installation
Installing smart locks, keypad locks, Wi-Fi locks, Bluetooth locks, app-controlled locks and keyless entry systems.
- Electric Strike Installation
Installing electric strikes for buzz-in entry systems.
- Access Code Programming
Adding, removing or changing access codes.
- Key Card Access Systems
Installing card reader systems for controlled entry.
- Keypad Lock Programming
Adding, changing or deleting access codes for homeowners, family members, renters, cleaners and contractors.
- User Access Management
Setting up different codes for employees, tenants, contractors, family members or guests.
- Keypad Lock Installation
Installing keypad deadbolts, digital door locks and electronic entry locks.
- Key Fob Access Systems
Installing and programming key fob systems.
- Emergency Locksmith
Urgent lock and key help for homes, businesses and vehicles at any hour.
- Safe Locksmith
Opening, repairing, servicing and changing combinations on home and business safes.
- Lock Replacement
Replacing old, damaged, outdated or unsecured locks with new locks.
- Mobile Locksmith
A locksmith that comes directly to the customer’s location.
- Residential Locksmith
Complete lock and key service for houses, apartments, condos and rental properties.
Magnetic Lock Installation near Whittier
We provide the same magnetic lock installation service in the communities around Whittier. See the main magnetic lock installation page or the full list of service areas.
- Magnetic Lock Installation in Pico Rivera
- Magnetic Lock Installation in Santa Fe Springs
- Magnetic Lock Installation in Hacienda Heights
- Magnetic Lock Installation in La Mirada
- Magnetic Lock Installation in La Habra Heights
- Magnetic Lock Installation in City of Industry
- Magnetic Lock Installation in South El Monte
- Magnetic Lock Installation in Montebello
- Magnetic Lock Installation in La Puente
- Magnetic Lock Installation in Norwalk
- Magnetic Lock Installation in El Monte
- Magnetic Lock Installation in Downey
Magnetic Lock Installation in Whittier: frequently asked questions
Do maglocks unlock when the power goes out?
Yes. Maglocks are fail-safe and release without power. A battery backup keeps the door secured during outages while still allowing people to exit.
What happens if the batteries or power fail?
Battery locks warn you for weeks and have a key or external power option. Wired systems should have battery backup, and exits are designed to release safely.
Will an electronic lock work on my existing door?
Most standard doors accept them. Very thick, thin, glass or metal doors need specific models, which we identify during the site check.
How many users can an electronic lock hold?
Residential keypad locks typically hold from a couple of dozen to a few hundred codes. Commercial systems manage thousands of users.
Can access be limited to certain days and times?
Yes. Most smart locks and all access control systems support schedules, temporary codes and automatic expiry.
Can smart locks be hacked?
Reputable brands use strong encryption, and real-world break-ins overwhelmingly involve force, not hacking. Strong passwords, two-factor authentication and updated firmware keep the risk low.
Can you install a lock I already bought?
Yes. We install customer-supplied locks, correct the door alignment they depend on, and complete the app setup.
Which smart lock is best for a home in Whittier?
It depends on the door and how you want to use it. A keypad deadbolt suits most households. Add Wi-Fi if you need remote control, or choose Bluetooth for longer battery life. We recommend models after seeing the door.
Which parts of Whittier do you serve?
All of Whittier, including Uptown Whittier, East Whittier, Friendly Hills, and the Hadley-Greenleaf historic district, and addresses in ZIP codes 90601, 90602, 90603, 90604, 90605, and 90606.
Are you open 24 hours in Whittier?
Yes. We take calls and dispatch to Whittier 24 hours a day, including weekends and holidays.
How long does it take a locksmith to reach me in Whittier?
It depends on where the nearest technician is and on traffic along I-605, I-5, or Whittier Boulevard. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
Which areas do you cover?
We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
