Quick answer
Mortise Lock Installation: Installing commercial mortise lock bodies, cylinders, trims and handles. Big Daddy Car Key Replacement provides mortise lock installation service in Whittier as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Mortise Lock Installation
- Area
- Whittier, Los Angeles County, CA (90601, 90602, 90603, 90604, 90605, 90606)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Commercial Locksmith Services
- Phone
- (562) 550-7206
On this page
- About our mortise lock installation service
- Who uses this service
- Signs you need mortise lock installation service
- Mortise Lock Installation across Whittier
- How our mortise lock installation service works
- Common situations in Whittier
- What our technicians bring
- Trade terms explained
- Cost factors for mortise lock installation service
- Why call Big Daddy Car Key Replacement
- Practical advice from our locksmiths
- Why this is a job for a locksmith
- Our service standards
- Choosing a locksmith: a short checklist
- Before you call (562) 550-7206
- After the visit
- Related locksmith services in Whittier
- Mortise Lock Installation near Whittier
- Mortise Lock Installation in Whittier: frequently asked questions
About our mortise lock installation service
Installing commercial mortise lock bodies, cylinders, trims and handles. A mortise lock sits in a deep pocket cut into the door edge and combines latch and deadbolt in one heavy steel case. It is the strongest and most serviceable lock type for commercial doors. Installation requires a precise pocket, correct handing and function, and trim aligned so the spindle and cylinder operate freely.

Every business in Whittier eventually faces the same questions. Who has keys? Do the exit doors work? Would the back door survive a pry bar? Our mortise lock installation service gives practical answers and carries out the work, usually in a single visit and with as little disruption as possible.
Who uses this service
Our commercial customers in Whittier include retail shops, restaurants, offices, medical and dental practices, warehouses, schools, places of worship, property management companies and homeowners associations. Some need a one-time rekey after a staffing change, others an ongoing arrangement covering key systems, exit hardware and door maintenance across several sites.
This service is part of our commercial locksmith services in Whittier.
Signs you need mortise lock installation service
These are the most common reasons customers in Whittier ask for mortise lock installation service:
- A high-traffic door keeps destroying cylindrical locks
- You want latch and deadbolt in one lock
- A new door arrived with a mortise prep
- An older building needs matching hardware
Mortise Lock Installation across Whittier
Located in Los Angeles County, Whittier is an incorporated city within our Gateway Cities service area. Customers anywhere in Whittier, including Uptown Whittier, East Whittier, Friendly Hills, the Hadley-Greenleaf historic district, South Whittier, and West Whittier, can have a mobile technician sent directly to them. Service is available throughout ZIP codes 90601, 90602, 90603, 90604, 90605, and 90606.
Whittier has one of the region’s best-preserved historic cores, with Craftsman and Victorian homes Uptown and mid-century ranches in Friendly Hills, so antique lock repair and modern upgrades go hand in hand.
People call us from all over Whittier, including the areas around Uptown Whittier, Whittier College, The Quad at Whittier, Whittwood Town Center, and Pio Pico State Historic Park. A landmark or cross street helps the technician reach you quickly. Depending on where the closest technician is, the drive into Whittier follows I-605, I-5, Whittier Boulevard, Painter Avenue, Colima Road, and Beverly Boulevard. You get a realistic arrival estimate when you call.
How our mortise lock installation service works
Discuss the need and the site
We ask about the type of business, the doors involved and any deadline, such as an inspection, a tenant move-in or a termination. Photos of the doors help us arrive with the right parts.
Verify authority
Work on a commercial property is done for the owner, the tenant of record, or the property manager. We confirm that before any lock is opened or changed.
Survey the openings
Each door is checked for lock type and function, closer, hinges or pivots, exit hardware and fire rating, so the solution fits both the security need and the code.
Agree scope and price
You receive a clear scope: which doors, what hardware, how many keys, and the cost. For key systems we draft the hierarchy for your approval first.
Carry out the work around your schedule
Rekeys, repairs and installations are done before opening, after closing or during quiet hours when that suits the business better.
Test, document and hand over
Every door is tested for locking, latching and free exit. Keys are stamped and counted, and for master systems you receive a record of what opens what.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Common situations in Whittier
- The storefront door will not latch and the shop cannot be left for the night.
- A closer has failed and the front door slams hard enough to rattle the glass.
- A manager is let go and returns only some of the keys issued.
- A fire inspection notes that the rear exit has a slide bolt and no panic hardware.
- You are taking over a suite and need the previous tenant’s keys cut off before move-in.
- Staff need access to the sales floor but not the office, stockroom or IT closet.
- The back door shows pry marks around the latch after the weekend.
What our technicians bring
Commercial doors use purpose-built hardware. Aluminum storefronts typically carry Adams Rite-style deadlatches and hook bolts driven by a mortise cylinder. Hollow metal and wood doors use Grade 1 cylindrical levers or mortise locks from makers such as Schlage, Sargent, Corbin Russwin and Yale. Exits use panic and fire exit devices, and closers from LCN, Norton and similar makers control the swing. Interchangeable cores allow fast rekeying. We stock the common cylinders, cams, tailpieces, lock bodies and closers.
Trade terms explained
- Exit device
- Panic or fire exit hardware that unlatches a door when the horizontal bar is pushed.
- Interchangeable core
- A removable lock core that a control key releases, allowing a door to be rekeyed in seconds.
- Master key system
- A planned arrangement in which each lock has its own key and a master key opens all of them.
- Door closer
- A hydraulic device that closes a door at a controlled speed and holds it latched.
- Restricted keyway
- A key profile whose blanks are supplied only to authorized locksmiths, preventing unauthorized copies.
- Mortise lock
- A heavy-duty lock housed in a pocket cut into the door edge, combining latch and deadbolt in one case.
- Cylindrical lock
- A lock installed through a round bore in the door, with the mechanism in the lever or knob assembly.
- Lock function
- How a lock behaves, such as entry, storeroom, classroom or passage, which determines when it is locked and who can lock it.
Cost factors for mortise lock installation service
- Code and fire-rating requirements
- Fire-rated openings need listed hardware, and exits may need panic devices. Compliance can dictate the product.
- Hardware grade and function
- Grade 1 mortise locks and exit devices cost more than cylindrical levers, and they last far longer on busy doors.
- After-hours scheduling
- Work outside normal hours avoids disruption and may be priced differently. We quote both where it matters.
- Key system complexity
- A simple rekey to one key is quick. A master or grand master system takes planning, more pinning time and record keeping.
- Electrified hardware
- Doors tied to access control, electric strikes or maglocks need wiring and coordination that add time.
- Number and type of doors
- Aluminum storefront doors, hollow metal doors and wood office doors use different hardware. Pricing reflects how many openings are involved and what each requires.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
Why call Big Daddy Car Key Replacement
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Whittier.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.

Practical advice from our locksmiths
- Never chain, padlock or bolt a required exit door while the building is occupied.
- Give each employee access only to the doors their job requires.
- Fit latch guards on out-swinging back doors, where the latch is exposed to prying.
- Have storefront pivots and closers serviced before the door starts dragging. It is cheaper than replacing a damaged lock.
- Rekey whenever a keyholder leaves on poor terms or a key cannot be accounted for.
- Test exit devices and door closers monthly. A door that does not latch is an unlocked door.
- Store spare keys in a locked key cabinet, not a desk drawer.
- Keep a written key log: who holds which key, and the date it was issued and returned.
Why this is a job for a locksmith
Commercial doors are regulated in ways that homes are not. The wrong lock function can trap someone inside a storeroom, a deadbolt on an exit can fail an inspection or cost a life, and unlisted hardware can void a fire door’s rating. A commercial locksmith knows the functions, the grades and the applicable codes, keeps your key system mathematically sound, and documents the work so the next change is straightforward.
Our service standards
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
Choosing a locksmith: a short checklist
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Get an itemized receipt showing labor, parts and the business details.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
Before you call (562) 550-7206
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
After the visit
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Whittier
Customers who need mortise lock installation service often ask about these as well. Each can usually be handled in the same visit to Whittier.
- Office Lockout Service
Unlocking office doors, private offices, conference rooms, file rooms and storage rooms.
- Exit Device Repair
Fixing commercial exit devices, dogging mechanisms, latches, rods and trim.
- Property Management Locksmith
Rekeys, lock changes, lockouts, mailbox locks, tenant turnover services and master key systems.
- High-Security Commercial Locks
Installing restricted keyway locks, pick-resistant locks, drill-resistant locks and bump-resistant lock systems.
- Cash Drawer Lock Replacement
Replacing locks on registers, cash drawers and POS stations.
- Commercial Door Hardware Repair
Repairing commercial handles, hinges, closers, locks, latches, strikes, pivots and door frames.
- Office Building Locksmith
Master key systems, access control, door hardware, lock repairs and tenant suite rekeys.
- Desk Lock Repair
Repairing locks for desks, drawers and office furniture.
- Door Closer Installation
Installing hydraulic door closers on commercial doors.
- Commercial Lock Rekeying
Rekeying locks after employee turnover, lost keys, tenant changes or security concerns.
- Ignition Repair
Repairing ignition cylinders that are stuck, worn or will not turn.
- Key Duplication
Making spare keys for house doors, gates, mailboxes, padlocks, cabinets and more.
- House Lockout
Unlocking front doors, back doors, side doors, garage entry doors and interior doors, without damaging the lock whenever possible.
- Access Control Installation
Installing electronic access systems for offices, warehouses, apartment buildings and commercial facilities.
- Transponder Key Programming
Programming chip keys for vehicles with immobilizer systems.
Mortise Lock Installation near Whittier
We provide the same mortise lock installation service in the communities around Whittier. See the main mortise lock installation page or the full list of service areas.
- Mortise Lock Installation in Pico Rivera
- Mortise Lock Installation in Santa Fe Springs
- Mortise Lock Installation in Hacienda Heights
- Mortise Lock Installation in La Mirada
- Mortise Lock Installation in La Habra Heights
- Mortise Lock Installation in City of Industry
- Mortise Lock Installation in South El Monte
- Mortise Lock Installation in Montebello
- Mortise Lock Installation in La Puente
- Mortise Lock Installation in Norwalk
- Mortise Lock Installation in El Monte
- Mortise Lock Installation in Downey
Mortise Lock Installation in Whittier: frequently asked questions
Why choose a mortise lock over a cylindrical lock?
Mortise locks are stronger, last longer under heavy use, offer more functions and can be rebuilt part by part. They cost more up front but outlast several cylindrical locks on a busy door.
Who is allowed to authorize lock changes for a business?
The owner, the tenant named on the lease, or the property manager. We verify authority before changing or opening any commercial lock.
What brands of commercial hardware do you service?
We work with the major commercial lines, including Schlage, Sargent, Corbin Russwin, Yale, Best, Adams Rite, Von Duprin, LCN, Norton and Kaba, and can match most existing hardware.
Can you provide documentation for our records?
Yes. For rekeys and key systems we provide a key schedule listing doors, key numbers and the quantity of keys issued.
Can you work outside our business hours in Whittier?
Yes. We are open 24 hours and regularly schedule rekeys, repairs and installations before opening or after closing so customers and staff are not disturbed.
How do we stop employees from copying keys?
Install a restricted key system. Its blanks are available only through the authorized locksmith and copies are cut only for people on your signature list.
Are our exit doors compliant?
We can check that exit doors open with one motion and no key, that panic hardware is present where required, and that closers latch the doors. Final authority rests with your fire marshal or building official.
Do you offer ongoing service for multiple locations?
Yes. We service multi-site businesses and managed properties across our service area and keep key records so later changes are fast.
Is there a travel charge for Whittier?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Whittier, so you know the cost in advance.
Can you make car keys in Whittier?
Yes. We cut and program car keys on site anywhere in Whittier, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Are you open 24 hours in Whittier?
Yes. We take calls and dispatch to Whittier 24 hours a day, including weekends and holidays.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
