Skip to content
Big Daddy Car Key Replacement logo(562) 550-7206

2000 Mitsubishi Eclipse Key Replacement in Willowbrook, CA

Big Daddy Car Key Replacement makes 2000 Mitsubishi Eclipse keys on site in Willowbrook. A mobile technician comes to the car, verifies ownership, cuts the key to factory code and programs it.

(562) 550-7206
  • Open 24 hours, every day
  • We come to you
  • Price range before we dispatch
2000 Mitsubishi Eclipse Key Replacement in Willowbrook, CA by Big Daddy Car Key Replacement

Quick answer

The 2000 Mitsubishi Eclipse typically uses a traditional edge-cut metal key with no transponder chip. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting. Big Daddy Car Key Replacement makes 2000 Mitsubishi Eclipse keys on site in Willowbrook, 24 hours a day. Call (562) 550-7206 for a price range.

Last updated

Vehicle
2000 Mitsubishi Eclipse
Typical key
Traditional metal key
Transponder chip
Usually no; varies
Blade
Edge-cut
Programming
Not normally required
Hours
Open 24 hours, 7 days a week
Phone
(562) 550-7206
On this page

What kind of key does a 2000 Mitsubishi Eclipse use?

The 2000 Mitsubishi Eclipse typically uses a traditional edge-cut metal key with no transponder chip. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting.

Traditional metal key

A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

2000 Mitsubishi Eclipse key replacement in Willowbrook
Traditional metal key for a 2000 Mitsubishi Eclipse, made on site in Willowbrook.

How we make a 2000 Mitsubishi Eclipse key

For the 2000 Mitsubishi Eclipse we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.

This page covers the 2000 model year. For other years, see the Mitsubishi Eclipse key replacement overview, or browse all Mitsubishi models.

How Mitsubishi key and immobilizer systems work

Mitsubishi immobilizers register transponders in the engine computer or the ETACS body module. Programming needs a diagnostic tool and, on many models, a PIN. Remote functions are frequently programmed separately from the chip. The FAST-Key proximity system on later models is registered through the same port.

Mitsubishi phased in immobilizers from about 2000 and later offered the FAST-Key proximity system. Programming needs a PIN and, on some models, registration of each remote separately from the chip.

Common Mitsubishi key and lock problems

These are the issues we see most often on Mitsubishi vehicles in Willowbrook:

  • Remotes that stop working while the chip still starts the car
  • Lost keys on models that need a PIN for programming
  • FAST-Key fobs not detected with a weak battery
  • Worn ignition cylinders on older Galant and Eclipse models

All keys lost or just need a spare?

How many keys you still have matters more than almost anything else. With one working key present, a second key can usually be copied or added in a short visit. With no keys at all, the technician must first work out the correct cuts, from the VIN or by decoding a lock, and then gain security access to the immobilizer so a new key can be registered. That all-keys-lost process is routine for us and is done on site, but it takes more time. If you are down to your last key, adding a spare today is far cheaper than replacing every key later.

Stranded with your Mitsubishi right now?

Stuck without a working key? First make sure you are somewhere safe and visible. Think about whether a spare exists at home or with a family member. Then call (562) 550-7206 and give us the year, make, model, your location and whether the vehicle is locked or open. We will tell you the likely cost and how long a technician will take to reach you. For a child or pet locked inside, call 911 before anything else.

2000 Mitsubishi Eclipse key replacement across Willowbrook

Willowbrook is an unincorporated community in Los Angeles County, part of the Central & South Los Angeles area we cover every day. We cover every part of Willowbrook, including the Wilmington Avenue corridor, the Imperial Highway corridor, and the medical campus district. Wherever you are in town, the technician comes to your door, driveway or parking space. We serve the 90059, 90061, and 90222 ZIP codes.

Willowbrook is an unincorporated community anchored by a growing medical campus and a major Metro transfer station, with older homes that benefit from rekeying and stronger door hardware.

Whether you are at home, at work, or stuck near Martin Luther King Jr. Community Hospital, Charles R. Drew University, Kenneth Hahn Plaza, the Willowbrook/Rosa Parks Metro station, or Earvin “Magic” Johnson Park, tell the dispatcher the nearest landmark and we will find you. Depending on where the closest technician is, the drive into Willowbrook follows I-105, I-110, Wilmington Avenue, Imperial Highway, El Segundo Boulevard, and Central Avenue. You get a realistic arrival estimate when you call.

Getting a 2000 Mitsubishi Eclipse key made, step by step

  1. Call with the year, make and model

    Tell us you need a key for a 2000 Mitsubishi Eclipse, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.

  2. We verify ownership

    Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.

  3. We identify the exact key system

    Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.

  4. The key is cut to code

    The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.

  5. The key is programmed to the car

    For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.

  6. Everything is tested before we leave

    We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

Programming a 2000 Mitsubishi Eclipse key in Willowbrook
Keys are programmed through the vehicle’s diagnostic port and tested before we leave.

What to have ready

  • A government-issued photo ID
  • The vehicle registration, title or current insurance card in your name
  • The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
  • Any remaining keys or remotes, including ones that no longer work
  • The vehicle itself, parked where a technician can open the driver’s door fully

Mobile locksmith or dealership for a Mitsubishi key?

Mobile locksmithDealership
Where the work happensAt your vehicle, wherever it is parkedAt the dealer’s service department
Towing with all keys lostNot neededUsually required
AvailabilityOpen 24 hours, including weekends and holidaysService department business hours
Typical waitOften the same dayAppointment, plus time to order the key by VIN
Key optionsOEM or quality aftermarket where availableOEM only
Restricted late-model systemsSome require a dealer key; we tell you up frontSupported

A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.

What affects the cost of a 2000 Mitsubishi Eclipse key

OEM or aftermarket parts
Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
Lock or ignition condition
If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
Time and location
Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
Model year and system generation
Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
Whether a working key exists
Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.

Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.

Lost keys and vehicle security

Whoever finds a lost key might find the car. During programming we can usually remove lost keys from the vehicle’s memory, which stops them starting the engine. That does not change the mechanical door lock, so if theft is a concern, the door cylinders can be rekeyed to a new cut as well.

Equipment we bring to the vehicle

Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.

Car key terms explained

Proximity key
A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
Key code
A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
Laser-cut key
A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
Remote head key
A key with the lock and unlock buttons built into its head, alongside the blade and chip.
VIN
The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
Diagnostic port
The connector under the dashboard through which keys are programmed to the vehicle’s computer.
All keys lost
A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.

Situations we are called to most often

  • The key fob went through the washing machine.
  • A used car was sold with one worn key and no spare.
  • The only key to the car is lost somewhere between the beach, the restaurant and home.
  • The ignition will not turn and the key will not come out.
  • The dash reads "key not detected" and the start button does nothing.

Why drivers in Willowbrook choose Big Daddy

Plain explanations
We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
A real, reachable business
Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
A price range before we dispatch
When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
Most jobs finished in one visit
Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
Open 24 hours, every day
Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Willowbrook.
Ownership is always verified
We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
Mitsubishi car key service in Willowbrook
Big Daddy Car Key Replacement: mobile, open 24 hours.

Looking after your Mitsubishi key

Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.

  • Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
  • Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
  • When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
  • Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
  • If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
  • Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
  • Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.

Choosing a car locksmith you can trust

  • In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
  • Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
  • Get an itemized receipt showing labor, parts and the business details.
  • Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
  • Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.

Other Mitsubishi Eclipse years

Other Mitsubishi models

2000 Mitsubishi Eclipse keys near Willowbrook

We make 2000 Mitsubishi Eclipse keys in the communities around Willowbrook as well. See the main 2000 Mitsubishi Eclipse key replacement page or the Willowbrook locksmith page.

2000 Mitsubishi Eclipse key replacement in Willowbrook: frequently asked questions

Does a 2000 Mitsubishi Eclipse key need programming?

A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.

Can any hardware store copy my 2000 Mitsubishi Eclipse key?

If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.

My Mitsubishi key turns in the door but not the ignition. Why?

The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.

Can you program a key for my Mitsubishi?

Yes for most models. We cut the key, program the transponder and pair the remote on site.

Why does my Mitsubishi remote not work after the key was programmed?

The remote and the transponder are separate systems on many Mitsubishis. The remote needs its own registration step.

Does car insurance cover a replacement Mitsubishi key?

Some comprehensive policies, roadside plans and dealer key-protection plans do. Check your policy; we provide an itemized receipt you can submit.

What do you need from me to make a 2000 Mitsubishi Eclipse key?

A photo ID and proof that the vehicle is yours, such as registration, title or insurance, plus access to the vehicle. Having the VIN ready when you call speeds things up.

Is a locksmith-made Mitsubishi key as good as a dealer key?

Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.

Can you make a key for a 2000 Mitsubishi Eclipse if I have lost every key?

In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.

Can you program a key I bought online for my 2000 Mitsubishi Eclipse?

We can try, if it is the correct part. We test the chip and frequency first. Many low-cost online keys are the wrong type or locked to another car, so we cannot guarantee a customer-supplied key.

Which parts of Willowbrook do you serve?

All of Willowbrook, including the Wilmington Avenue corridor, the Imperial Highway corridor, and the medical campus district, and addresses in ZIP codes 90059, 90061, and 90222.

Are you open 24 hours in Willowbrook?

Yes. We take calls and dispatch to Willowbrook 24 hours a day, including weekends and holidays.

What are your hours?

We are open 24 hours a day, seven days a week, including weekends and holidays.

How can I contact you other than by phone?

You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.

Call Now (562) 550-7206Open 24 hours · mobile locksmith