Quick answer
The 1995 Mitsubishi Galant typically uses a traditional edge-cut metal key with no transponder chip. Big Daddy Car Key Replacement makes 1995 Mitsubishi Galant keys on site in Willowbrook, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 1995 Mitsubishi Galant
- Typical key
- Traditional metal key
- Transponder chip
- No
- Blade
- Edge-cut
- Programming
- Not normally required
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 1995 Mitsubishi Galant use?
- How we make a 1995 Mitsubishi Galant key
- How Mitsubishi key and immobilizer systems work
- Common Mitsubishi key and lock problems
- All keys lost or just need a spare?
- Stranded with your Mitsubishi right now?
- 1995 Mitsubishi Galant key replacement across Willowbrook
- Getting a 1995 Mitsubishi Galant key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Mitsubishi key?
- What affects the cost of a 1995 Mitsubishi Galant key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers in Willowbrook choose Big Daddy
- Looking after your Mitsubishi key
- Choosing a car locksmith you can trust
- Other Mitsubishi Galant years
- Other Mitsubishi models
- Related automotive locksmith services in Willowbrook
- 1995 Mitsubishi Galant keys near Willowbrook
- 1995 Mitsubishi Galant key replacement in Willowbrook: frequently asked questions
What kind of key does a 1995 Mitsubishi Galant use?
The 1995 Mitsubishi Galant typically uses a traditional edge-cut metal key with no transponder chip.
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

How we make a 1995 Mitsubishi Galant key
For the 1995 Mitsubishi Galant we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.
This page covers the 1995 model year. For other years, see the Mitsubishi Galant key replacement overview, or browse all Mitsubishi models.
How Mitsubishi key and immobilizer systems work
Mitsubishi immobilizers register transponders in the engine computer or the ETACS body module. Programming needs a diagnostic tool and, on many models, a PIN. Remote functions are frequently programmed separately from the chip. The FAST-Key proximity system on later models is registered through the same port.
Mitsubishi phased in immobilizers from about 2000 and later offered the FAST-Key proximity system. Programming needs a PIN and, on some models, registration of each remote separately from the chip.
Common Mitsubishi key and lock problems
These are the issues we see most often on Mitsubishi vehicles in Willowbrook:
- Remotes that stop working while the chip still starts the car
- Lost keys on models that need a PIN for programming
- FAST-Key fobs not detected with a weak battery
- Worn ignition cylinders on older Galant and Eclipse models
All keys lost or just need a spare?
How many keys you still have matters more than almost anything else. With one working key present, a second key can usually be copied or added in a short visit. With no keys at all, the technician must first work out the correct cuts, from the VIN or by decoding a lock, and then gain security access to the immobilizer so a new key can be registered. That all-keys-lost process is routine for us and is done on site, but it takes more time. If you are down to your last key, adding a spare today is far cheaper than replacing every key later.
Stranded with your Mitsubishi right now?
Stuck without a working key? First make sure you are somewhere safe and visible. Think about whether a spare exists at home or with a family member. Then call (562) 550-7206 and give us the year, make, model, your location and whether the vehicle is locked or open. We will tell you the likely cost and how long a technician will take to reach you. For a child or pet locked inside, call 911 before anything else.
1995 Mitsubishi Galant key replacement across Willowbrook
Willowbrook is an unincorporated community in Los Angeles County, part of the Central & South Los Angeles area we cover every day. Customers anywhere in Willowbrook, including the Wilmington Avenue corridor, the Imperial Highway corridor, and the medical campus district, can have a mobile technician sent directly to them. That includes addresses in ZIP codes 90059, 90061, and 90222.
Willowbrook is an unincorporated community anchored by a growing medical campus and a major Metro transfer station, with older homes that benefit from rekeying and stronger door hardware.
If you are out and about near Martin Luther King Jr. Community Hospital, Charles R. Drew University, Kenneth Hahn Plaza, the Willowbrook/Rosa Parks Metro station, or Earvin “Magic” Johnson Park, give us that location when you call and wait somewhere safe and visible. Depending on where the closest technician is, the drive into Willowbrook follows I-105, I-110, Wilmington Avenue, Imperial Highway, El Segundo Boulevard, and Central Avenue. You get a realistic arrival estimate when you call.
Getting a 1995 Mitsubishi Galant key made, step by step
Call with the year, make and model
Tell us you need a key for a 1995 Mitsubishi Galant, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Mitsubishi key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 1995 Mitsubishi Galant key
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
Whoever finds a lost key might find the car. During programming we can usually remove lost keys from the vehicle’s memory, which stops them starting the engine. That does not change the mechanical door lock, so if theft is a concern, the door cylinders can be rekeyed to a new cut as well.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Immobilizer
- The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
Situations we are called to most often
- The ignition will not turn and the key will not come out.
- The key fob went through the washing machine.
- The only key to the car is lost somewhere between the beach, the restaurant and home.
- The key is locked in the trunk and the trunk release is disabled.
- A used car was sold with one worn key and no spare.
Why drivers in Willowbrook choose Big Daddy
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.

Looking after your Mitsubishi key
Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.
- Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
- Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
- Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
- If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
Choosing a car locksmith you can trust
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
Other Mitsubishi Galant years
- 2012 Galant
- 2011 Galant
- 2010 Galant
- 2009 Galant
- 2008 Galant
- 2007 Galant
- 2006 Galant
- 2005 Galant
- 2004 Galant
- 2003 Galant
- 2002 Galant
- 2001 Galant
- 2000 Galant
- 1999 Galant
- 1998 Galant
- 1997 Galant
- 1996 Galant
- 1994 Galant
- 1993 Galant
- 1992 Galant
- 1991 Galant
- 1990 Galant
Other Mitsubishi models
- Mitsubishi Mirage keys
- Mitsubishi Outlander keys
- Mitsubishi Eclipse keys
- Mitsubishi Montero keys
- Mitsubishi Lancer keys
- Mitsubishi Outlander Sport keys
- Mitsubishi Diamante keys
- Mitsubishi 3000GT keys
- Mitsubishi Eclipse Cross keys
- Mitsubishi Endeavor keys
- Mitsubishi Montero Sport keys
- Mitsubishi Raider keys
Related automotive locksmith services in Willowbrook
- Boat Key Replacement
Replacing keys for boat ignitions, compartments and storage locks.
- Laser Cut Key
Cutting high-security sidewinder/laser-cut keys.
- Smart Key Replacement
Replacing push-to-start smart keys and proximity keys.
- Ignition Replacement
Replacing damaged or failed ignition cylinders.
- Car Key Replacement
Replacing lost, stolen or damaged car keys.
- Trunk Lockout Service
Opening locked trunks when keys are lost or locked inside.
- Lost Car Key Replacement
Making a new car key when all keys are lost.
- Push-to-Start Key Programming
Programming proximity keys for push-button ignition vehicles.
1995 Mitsubishi Galant keys near Willowbrook
We make 1995 Mitsubishi Galant keys in the communities around Willowbrook as well. See the main 1995 Mitsubishi Galant key replacement page or the Willowbrook locksmith page.
- 1995 Mitsubishi Galant keys in Compton
- 1995 Mitsubishi Galant keys in Athens
- 1995 Mitsubishi Galant keys in Lynwood
- 1995 Mitsubishi Galant keys in Westmont
- 1995 Mitsubishi Galant keys in South Gate
- 1995 Mitsubishi Galant keys in Gardena
- 1995 Mitsubishi Galant keys in Huntington Park
- 1995 Mitsubishi Galant keys in Cudahy
- 1995 Mitsubishi Galant keys in Hawthorne
- 1995 Mitsubishi Galant keys in Bell
- 1995 Mitsubishi Galant keys in Paramount
- 1995 Mitsubishi Galant keys in Lawndale
1995 Mitsubishi Galant key replacement in Willowbrook: frequently asked questions
Does a 1995 Mitsubishi Galant key need programming?
A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.
Can any hardware store copy my 1995 Mitsubishi Galant key?
If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.
My Mitsubishi key turns in the door but not the ignition. Why?
The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.
Can you program a key for my Mitsubishi?
Yes for most models. We cut the key, program the transponder and pair the remote on site.
Why does my Mitsubishi remote not work after the key was programmed?
The remote and the transponder are separate systems on many Mitsubishis. The remote needs its own registration step.
Can you make a 1995 Mitsubishi Galant key at night or on a weekend?
Yes. We are open 24 hours, seven days a week, including holidays, which is when dealership parts and service departments are closed.
What do you need from me to make a 1995 Mitsubishi Galant key?
A photo ID and proof that the vehicle is yours, such as registration, title or insurance, plus access to the vehicle. Having the VIN ready when you call speeds things up.
How much does a 1995 Mitsubishi Galant key cost?
It depends on the key type for your exact trim and on whether you still have a working key. Call (562) 550-7206 with the year, make and model and we will give you a price range before sending anyone.
Do I have to tow my 1995 Mitsubishi Galant to you?
No. We are a mobile service. The key machines and programming equipment are in the van, and the work is done where the vehicle is parked.
Do you also repair the ignition on a 1995 Mitsubishi Galant?
Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.
How long does it take a locksmith to reach me in Willowbrook?
It depends on where the nearest technician is and on traffic along I-105, I-110, or Wilmington Avenue. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Are you open 24 hours in Willowbrook?
Yes. We take calls and dispatch to Willowbrook 24 hours a day, including weekends and holidays.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
