Quick answer
High-Security Lock Installation: Installing high-security locks designed to resist picking, drilling, bumping and unauthorized key duplication. Big Daddy Car Key Replacement provides high-security lock installation service in Los Angeles County and Ventura County as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- High-Security Lock Installation
- Area
- Los Angeles County and Ventura County, California
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Residential Locksmith Services
- Phone
- (562) 550-7206
On this page
- What high-security lock installation means
- Who uses this service
- Reasons to call for high-security lock installation service
- Our high-security lock installation process, step by step
- Typical calls we receive
- What our technicians bring
- Trade terms explained
- Cost factors for high-security lock installation service
- What you can expect from us
- Advice worth knowing
- Doing it yourself versus calling a professional
- What we commit to
- How to choose a locksmith you can trust
- How to prepare for the visit
- After the visit
- Related locksmith services
- Where we provide high-security lock installation service
- High-Security Lock Installation: frequently asked questions
What high-security lock installation means
Installing high-security locks designed to resist picking, drilling, bumping and unauthorized key duplication. High-security locks add hardened steel inserts against drilling, complex pin or sidebar mechanisms against picking and bumping, and patented keys that cannot be copied at a hardware store. They make sense on main entries, on doors hidden from the street, and anywhere you need to know exactly how many keys exist.

Homes change hands, tenants come and go, doors settle and locks wear. For high-security lock installation service in Los Angeles County and Ventura County, we bring the workshop to your driveway: rekeying kits, deadbolts, locksets, strike plates and key machines. You get a clear recommendation, a price before work begins, and locks that are tested with you before we leave.
Who uses this service
We work for homeowners, tenants, landlords, property managers, real estate agents and short-term rental hosts in Los Angeles County and Ventura County. New buyers want every lock rekeyed before moving in, landlords need quick turnovers between tenants, families want one key for the whole house, and older residents often ask for hardware that is easier to operate. Each has slightly different priorities, and we tailor the recommendation accordingly.
This service is part of our residential locksmith services.
Reasons to call for high-security lock installation service
People in Los Angeles County and Ventura County usually call us for high-security lock installation service in situations like these:
- You want keys that cannot be copied without your approval
- Your area has seen lock bumping or forced entries
- You keep valuables or a home office on site
- Many people have held keys over the years
Our high-security lock installation process, step by step
A short phone consultation
Tell us what is happening and how many doors are involved. From that we can usually give a price range and suggest whether rekeying, repair or replacement fits best.
On-site inspection
The technician looks at each lock, the door, the frame and the strike plate. Problems blamed on a lock are often caused by a sagging door or a loose strike, and it pays to find that first.
Clear options and a firm price
You hear what can be repaired, what should be replaced and what is optional, with a price for each, before any work begins.
The work is done at your door
Cylinders are rekeyed, locks installed or repaired, strikes reinforced and keys cut in the van outside. Most homes are finished in under two hours.
Every lock is tested with you
You try each key in each lock with the door open and closed. Bolts should extend fully and turn with two fingers.
Keys and advice are handed over
You receive the new keys, and we note anything worth watching, such as a worn hinge or a door that will need adjusting when the weather changes.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Typical calls we receive
- The front door deadbolt has become stiff and now needs a shoulder against the door to lock.
- A handbag with house keys and a driver’s license was stolen from a car.
- A back door has only a locking knob, which can be slipped or forced in seconds.
- A roommate, partner or tenant has moved out and still has a key.
- An older parent is having trouble with a round knob and needs lever handles.
- Each door in the house takes a different key and the ring keeps growing.
- You have just closed on a house and have no idea how many keys the previous owners handed out.
What our technicians bring
Residential security in Southern California runs largely on two keyways, Kwikset KW1 and Schlage SC1, plus premium lines such as Baldwin, Emtek and Yale. Our vans carry rekeying pins for all of them, single- and double-cylinder deadbolts in common finishes, keyed entry knobs and levers, privacy and passage sets, latches, reinforced strike plates, door wrap plates and hinge screws. For higher security we install cylinders with hardened inserts and restricted keys.
Trade terms explained
- Single and double cylinder
- A single-cylinder deadbolt has a key outside and a thumbturn inside; a double-cylinder model needs a key on both sides.
- Deadbolt
- A lock whose solid bolt is moved only by a key or thumbturn, so it cannot be pushed back like a spring latch.
- Rekeying
- Replacing the pins in a lock cylinder so a new key works and previous keys do not, without changing the hardware.
- ANSI/BHMA grade
- A performance rating for locks: Grade 1 is the strongest and most durable, Grade 2 is solid residential quality, Grade 3 is basic.
- Keyway
- The shape of the slot a key slides into. Kwikset KW1 and Schlage SC1 are the most common in local homes.
- Backset
- The distance from the door edge to the center of the lock hole, normally 2⅜ or 2¾ inches.
- Keyed alike
- Several locks set to operate with the same key.
- Strike plate
- The metal plate on the door frame that the latch or bolt enters when the door is closed.
Cost factors for high-security lock installation service
- Door preparation
- Fitting a lock to existing holes is quick. Boring a new door, enlarging old holes or repairing a damaged edge takes additional time.
- Scheduling
- Planned daytime appointments are typically priced lower than urgent late-night calls.
- Grade and brand of hardware
- A Grade 1 deadbolt costs more than Grade 3, and high-security or designer hardware more again. The front and back doors are where better hardware pays off.
- Rekey, repair or replace
- Rekeying is the least expensive, a repair usually sits in the middle, and new hardware costs the most. We recommend the cheapest option that solves the actual problem.
- Smart or electronic features
- Keypad and smart locks cost more than mechanical ones and take longer to set up, especially when the door needs aligning so the motor can throw the bolt.
- Condition of door and frame
- A split jamb, stripped hinge screws or a swollen door has to be corrected for a lock to work properly, and that adds labor.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
What you can expect from us
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.

Advice worth knowing
- Have all compatible locks keyed alike. One key is easier to carry and easier to keep track of.
- Keep a record of who holds keys. When that list becomes uncertain, it is time to rekey.
- Do not hide a spare under a mat, a rock or a planter. Use a lock box or leave a key with a neighbor.
- If a key begins to stick, have it looked at. Sticking is the usual warning before a lock fails completely.
- When buying new hardware, check that the ANSI/BHMA grade is printed on the package.
- Fit a deadbolt with a one-inch throw on every exterior door, including the door from the garage into the house.
- Add a secondary lock to sliding glass doors, and anti-lift blocks in the upper track.
- Rekey as soon as you get the keys to a new home. Builders, agents, cleaners and previous owners may all have copies.
Doing it yourself versus calling a professional
Installing or rekeying a lock looks simple in a video, and sometimes it is. The problems appear at the edges: a bolt that does not fully extend and therefore is not deadlocked, a strike held by half-inch screws, pins dropped during a rekey, a latch installed upside down. A locksmith does this work daily, carries the parts to correct what turns up, and leaves you with a door that has been tested under real conditions.
What we commit to
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
How to choose a locksmith you can trust
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Get an itemized receipt showing labor, parts and the business details.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
How to prepare for the visit
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
After the visit
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services
Customers who need high-security lock installation service often ask about these as well. Each can usually be handled in the same visit.
- Lock Repair
Repairing locks that are sticky, jammed, loose, misaligned or difficult to operate.
- Garage Door Lock Repair
Repairing or replacing manual garage locks, side door locks and garage entry door hardware.
- Sliding Door Lock Repair
Fixing sliding door lock mechanisms, handles, rollers, latches and alignment issues.
- Change Locks
Swapping out the locks on your doors for new ones, with new keys, in one visit.
- Lock Rekey
Changing the internal pins of an existing lock so old keys no longer work. Ideal after moving in, tenant changes, lost keys or employee turnover.
- Apartment Locksmith Service
Lockouts, rekeys, lock changes and key copies for apartments and rental units.
- Lost House Key Service
Rekeying or replacing locks when house keys are lost or stolen.
- Lock Maintenance
Lubricating, adjusting, tightening and servicing locks to extend their life and improve operation.
- Deadbolt Installation
Installing single-cylinder, double-cylinder, high-security or smart deadbolts.
- Tenant Move-Out Rekey
Rekeying locks after tenants move out to protect property owners and new occupants.
- Access Control Installation
Installing electronic access systems for offices, warehouses, apartment buildings and commercial facilities.
- Storefront Lock Repair
Repairing locks on glass storefront doors, aluminum doors and commercial entryways.
- Business Lockout
Unlocking offices, storefronts, warehouses, restaurants, retail stores and commercial buildings.
- Ignition Repair
Repairing ignition cylinders that are stuck, worn or will not turn.
- Car Lockout
Unlocking vehicles when keys are locked inside.
Where we provide high-security lock installation service
Big Daddy Car Key Replacement is a mobile locksmith serving 140 communities across Los Angeles County and Ventura County. Technicians travel to homes, businesses and vehicles from the San Fernando Valley and the Westside to the South Bay, the Gateway Cities, the San Gabriel and Pomona Valleys, Santa Clarita, the Antelope Valley and Ventura County. Choose your community below for local details, or call (562) 550-7206 and tell us where you are.
San Fernando Valley
- Arleta
- Canoga Park
- Chatsworth
- Encino
- Granada Hills
- Lake Balboa
- Lake View Terrace
- Mission Hills
- North Hills
- North Hollywood
- Northridge
- Pacoima
- Panorama City
- Porter Ranch
- Reseda
- San Fernando
- Sherman Oaks
- Studio City
- Sun Valley
- Sylmar
- Tarzana
- Toluca Lake
- Valley Glen
- Valley Village
- Van Nuys
- West Hills
- Winnetka
- Woodland Hills
Burbank, Glendale & Foothills
Las Virgenes & Malibu
Westside
Central & South Los Angeles
South Bay
- Carson
- El Segundo
- Gardena
- Hawthorne
- Hermosa Beach
- Inglewood
- Lawndale
- Lomita
- Manhattan Beach
- Palos Verdes Estates
- Rancho Palos Verdes
- Redondo Beach
- Rolling Hills
- Rolling Hills Estates
- Torrance
- West Carson
Gateway Cities
- Artesia
- Bell
- Bell Gardens
- Bellflower
- Cerritos
- Commerce
- Compton
- Cudahy
- Downey
- Hawaiian Gardens
- Huntington Park
- La Habra Heights
- La Mirada
- Lakewood
- Long Beach
- Lynwood
- Maywood
- Montebello
- Norwalk
- Paramount
- Pico Rivera
- Santa Fe Springs
- Signal Hill
- South Gate
- Vernon
- Whittier
San Gabriel Valley
- Alhambra
- Altadena
- Arcadia
- Azusa
- Baldwin Park
- Bradbury
- City of Industry
- Covina
- Diamond Bar
- Duarte
- El Monte
- Glendora
- Hacienda Heights
- Irwindale
- La Puente
- Monrovia
- Monterey Park
- Pasadena
- Rosemead
- Rowland Heights
- San Dimas
- San Gabriel
- San Marino
- Sierra Madre
- South El Monte
- South Pasadena
- Temple City
- Walnut
- West Covina
Pomona Valley
Santa Clarita Valley
Antelope Valley
Ventura County
Santa Catalina Island
High-Security Lock Installation: frequently asked questions
Are high-security locks worth it for a house?
They are worth it on the doors that matter most. One or two high-security deadbolts on primary entries, paired with reinforced strikes, give you pick, bump and drill resistance plus real control over key copies.
Do you need to see proof that I live here?
For lockouts and lock changes, yes. A photo ID with the address, a lease, a utility bill or closing documents are all acceptable.
How long does a typical residential job take?
A lockout takes minutes. Rekeying a house usually takes under an hour, and installing several new deadbolts one to two hours.
What lock brands do you work with?
We service and install the common residential brands found in Southern California homes, including Schlage, Kwikset, Baldwin, Yale, Emtek and Weiser, along with high-security lines.
What is the most secure type of front door lock?
A Grade 1 deadbolt with a hardened one-inch bolt, installed with a reinforced strike plate screwed into the wall stud. A high-security cylinder adds pick, bump and key-copy protection.
Can all my doors use the same key?
Yes, if the locks share a keyway or can be fitted with cylinders that do. Mixed brands can often be brought onto one key by swapping a cylinder or two.
Do you provide service for landlords and tenants?
Yes. We rekey between tenants, handle tenant lockouts with proper verification, and replace mailbox locks. Tenants should check their lease before changing locks.
Should I rekey or replace the locks in my Los Angeles County and Ventura County home?
Rekey when the locks are in good condition and you simply need old keys to stop working. Replace when locks are worn, damaged, low grade, or you want new features. We look at each lock and tell you which makes sense.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
