Quick answer
The 1998 Chevrolet Blazer typically uses a traditional edge-cut metal key with no transponder chip. Big Daddy Car Key Replacement makes 1998 Chevrolet Blazer keys on site, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 1998 Chevrolet Blazer
- Typical key
- Traditional metal key
- Transponder chip
- No
- Blade
- Edge-cut
- Programming
- Not normally required
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 1998 Chevrolet Blazer use?
- How we make a 1998 Chevrolet Blazer key
- How Chevrolet key and immobilizer systems work
- Common Chevrolet key and lock problems
- All keys lost or just need a spare?
- Stranded with your Chevrolet right now?
- Getting a 1998 Chevrolet Blazer key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Chevrolet key?
- What affects the cost of a 1998 Chevrolet Blazer key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers choose Big Daddy
- Looking after your Chevrolet key
- Choosing a car locksmith you can trust
- Other Chevrolet Blazer years
- Other Chevrolet models
- Related automotive locksmith services
- Where we make 1998 Chevrolet Blazer keys
- 1998 Chevrolet Blazer key replacement: frequently asked questions
What kind of key does a 1998 Chevrolet Blazer use?
The 1998 Chevrolet Blazer typically uses a traditional edge-cut metal key with no transponder chip.
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

How we make a 1998 Chevrolet Blazer key
For the 1998 Chevrolet Blazer we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.
This page covers the 1998 model year. For other years, see the Chevrolet Blazer key replacement overview, or browse all Chevrolet models.
How Chevrolet key and immobilizer systems work
General Motors has used several anti-theft systems over the years. PASS-Key (VATS) keys from the late 1980s through the 1990s carry a visible resistor pellet that must match one of fifteen values. Passlock, common on trucks and compacts into the 2000s, uses a sensor in the ignition cylinder and an ordinary key. PASS-Key III and III+ use a transponder chip, and from about 2010 GM moved to laser-cut flip keys and then proximity fobs programmed through secured access.
Chevrolet key technology varies widely by model: full-size trucks and SUVs used Passlock without a chip until 2007, while cars like the Impala had transponders from 2000. Since 2010 most Chevrolets use laser-cut flip keys or proximity fobs.
Common Chevrolet key and lock problems
These are the issues we see most often on Chevrolet vehicles:
- Passlock faults that leave a security light flashing and the engine disabled for ten minutes at a time
- Worn ignition cylinders on trucks and SUVs that will not turn or will not release the key
- Flip-key blades that loosen or snap at the hinge
- Proximity fobs that stop being detected after a battery or module replacement
All keys lost or just need a spare?
How many keys you still have matters more than almost anything else. With one working key present, a second key can usually be copied or added in a short visit. With no keys at all, the technician must first work out the correct cuts, from the VIN or by decoding a lock, and then gain security access to the immobilizer so a new key can be registered. That all-keys-lost process is routine for us and is done on site, but it takes more time. If you are down to your last key, adding a spare today is far cheaper than replacing every key later.
Stranded with your Chevrolet right now?
Stuck without a working key? First make sure you are somewhere safe and visible. Think about whether a spare exists at home or with a family member. Then call (562) 550-7206 and give us the year, make, model, your location and whether the vehicle is locked or open. We will tell you the likely cost and how long a technician will take to reach you. For a child or pet locked inside, call 911 before anything else.
Getting a 1998 Chevrolet Blazer key made, step by step
Call with the year, make and model
Tell us you need a key for a 1998 Chevrolet Blazer, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Chevrolet key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 1998 Chevrolet Blazer key
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
Whoever finds a lost key might find the car. During programming we can usually remove lost keys from the vehicle’s memory, which stops them starting the engine. That does not change the mechanical door lock, so if theft is a concern, the door cylinders can be rekeyed to a new cut as well.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
- Immobilizer
- The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
Situations we are called to most often
- The ignition will not turn and the key will not come out.
- The dash reads "key not detected" and the start button does nothing.
- The only key to the car is lost somewhere between the beach, the restaurant and home.
- A hardware-store copy opens the door but the engine will not start.
- The key is locked in the trunk and the trunk release is disabled.
Why drivers choose Big Daddy
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Los Angeles County, Ventura County and the Anaheim area of Orange County.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.

Looking after your Chevrolet key
Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.
- Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
- Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
- Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
Choosing a car locksmith you can trust
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Get an itemized receipt showing labor, parts and the business details.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
Other Chevrolet Blazer years
- 2026 Blazer
- 2025 Blazer
- 2024 Blazer
- 2023 Blazer
- 2022 Blazer
- 2021 Blazer
- 2020 Blazer
- 2019 Blazer
- 2005 Blazer
- 2004 Blazer
- 2003 Blazer
- 2002 Blazer
- 2001 Blazer
- 2000 Blazer
- 1999 Blazer
- 1997 Blazer
- 1996 Blazer
- 1995 Blazer
- 1994 Blazer
- 1993 Blazer
- 1992 Blazer
- 1991 Blazer
- 1990 Blazer
Other Chevrolet models
- Chevrolet Corvette keys
- Chevrolet Suburban keys
- Chevrolet Tahoe keys
- Chevrolet Express keys
- Chevrolet Malibu keys
- Chevrolet Camaro keys
- Chevrolet Silverado 1500 keys
- Chevrolet Silverado 2500HD keys
- Chevrolet Impala keys
- Chevrolet Equinox keys
- Chevrolet Colorado keys
- Chevrolet Traverse keys
- Chevrolet Astro keys
Related automotive locksmith services
- RV Key Replacement
Replacing keys for RV doors, compartments, storage locks and ignitions.
- Lost Car Key Replacement
Making a new car key when all keys are lost.
- Emergency Vehicle Lockout
Fast unlocking for cars, trucks, SUVs, vans and work vehicles.
- Remote Head Key Replacement
Replacing keys with built-in remote buttons.
- Push-to-Start Key Programming
Programming proximity keys for push-button ignition vehicles.
- Key Fob Programming
Programming new or replacement key fobs.
- Semi-Truck Locksmith
Lockouts, key replacement, ignition repair and fleet key services for commercial trucks.
- Spare Car Key
Creating duplicate or backup keys.
Where we make 1998 Chevrolet Blazer keys
Big Daddy Car Key Replacement is a mobile service covering 150 communities across Los Angeles County, Ventura County and the Anaheim area of Orange County. The work is done wherever the vehicle is parked. A few of the areas we serve are listed here; see all service areas for the rest.
- 1998 Chevrolet Blazer keys in Calabasas
- 1998 Chevrolet Blazer keys in Glendale
- 1998 Chevrolet Blazer keys in South El Monte
- 1998 Chevrolet Blazer keys in Monrovia
- 1998 Chevrolet Blazer keys in Signal Hill
- 1998 Chevrolet Blazer keys in Yorba Linda
- 1998 Chevrolet Blazer keys in Montebello
- 1998 Chevrolet Blazer keys in Moorpark
- 1998 Chevrolet Blazer keys in Bradbury
- 1998 Chevrolet Blazer keys in Bellflower
- 1998 Chevrolet Blazer keys in Port Hueneme
- 1998 Chevrolet Blazer keys in West Hollywood
- 1998 Chevrolet Blazer keys in Rowland Heights
- 1998 Chevrolet Blazer keys in El Monte
- 1998 Chevrolet Blazer keys in Marina del Rey
- 1998 Chevrolet Blazer keys in Long Beach
- 1998 Chevrolet Blazer keys in Rosemead
- 1998 Chevrolet Blazer keys in Topanga
- 1998 Chevrolet Blazer keys in Norwalk
- 1998 Chevrolet Blazer keys in Walnut
- 1998 Chevrolet Blazer keys in West Carson
- 1998 Chevrolet Blazer keys in Vernon
- 1998 Chevrolet Blazer keys in Simi Valley
- 1998 Chevrolet Blazer keys in Canoga Park
1998 Chevrolet Blazer key replacement: frequently asked questions
Does a 1998 Chevrolet Blazer key need programming?
A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.
Can any hardware store copy my 1998 Chevrolet Blazer key?
If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.
My Chevrolet key turns in the door but not the ignition. Why?
The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.
Why is the security light flashing on my Chevrolet and the engine will not start?
The anti-theft system does not recognize the key or the ignition sensor signal. It may be a worn key, a failed Passlock sensor or an unprogrammed chip. We diagnose which and correct it; a relearn procedure is often part of the fix.
Can a Chevrolet key be programmed without going to the dealer?
Yes for the great majority of models. Older systems use an on-board relearn and newer ones need a diagnostic tool with security access, which we carry.
How much does a 1998 Chevrolet Blazer key cost?
It depends on the key type for your exact trim and on whether you still have a working key. Call (562) 550-7206 with the year, make and model and we will give you a price range before sending anyone.
Can you program a key I bought online for my 1998 Chevrolet Blazer?
We can try, if it is the correct part. We test the chip and frequency first. Many low-cost online keys are the wrong type or locked to another car, so we cannot guarantee a customer-supplied key.
What do you need from me to make a 1998 Chevrolet Blazer key?
A photo ID and proof that the vehicle is yours, such as registration, title or insurance, plus access to the vehicle. Having the VIN ready when you call speeds things up.
Is a locksmith-made Chevrolet key as good as a dealer key?
Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.
Can you make a key for a 1998 Chevrolet Blazer if I have lost every key?
In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
