Quick answer
The 2000 Chevrolet Blazer typically uses a traditional edge-cut metal key with no transponder chip. Big Daddy Car Key Replacement makes 2000 Chevrolet Blazer keys on site, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 2000 Chevrolet Blazer
- Typical key
- Traditional metal key
- Transponder chip
- No
- Blade
- Edge-cut
- Programming
- Not normally required
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 2000 Chevrolet Blazer use?
- How we make a 2000 Chevrolet Blazer key
- How Chevrolet key and immobilizer systems work
- Common Chevrolet key and lock problems
- All keys lost or just need a spare?
- Stranded with your Chevrolet right now?
- Getting a 2000 Chevrolet Blazer key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Chevrolet key?
- What affects the cost of a 2000 Chevrolet Blazer key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers choose Big Daddy
- Looking after your Chevrolet key
- Choosing a car locksmith you can trust
- Other Chevrolet Blazer years
- Other Chevrolet models
- Related automotive locksmith services
- Where we make 2000 Chevrolet Blazer keys
- 2000 Chevrolet Blazer key replacement: frequently asked questions
What kind of key does a 2000 Chevrolet Blazer use?
The 2000 Chevrolet Blazer typically uses a traditional edge-cut metal key with no transponder chip.
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

How we make a 2000 Chevrolet Blazer key
For the 2000 Chevrolet Blazer we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.
This page covers the 2000 model year. For other years, see the Chevrolet Blazer key replacement overview, or browse all Chevrolet models.
How Chevrolet key and immobilizer systems work
General Motors has used several anti-theft systems over the years. PASS-Key (VATS) keys from the late 1980s through the 1990s carry a visible resistor pellet that must match one of fifteen values. Passlock, common on trucks and compacts into the 2000s, uses a sensor in the ignition cylinder and an ordinary key. PASS-Key III and III+ use a transponder chip, and from about 2010 GM moved to laser-cut flip keys and then proximity fobs programmed through secured access.
Chevrolet key technology varies widely by model: full-size trucks and SUVs used Passlock without a chip until 2007, while cars like the Impala had transponders from 2000. Since 2010 most Chevrolets use laser-cut flip keys or proximity fobs.
Common Chevrolet key and lock problems
These are the issues we see most often on Chevrolet vehicles:
- Passlock faults that leave a security light flashing and the engine disabled for ten minutes at a time
- Worn ignition cylinders on trucks and SUVs that will not turn or will not release the key
- Flip-key blades that loosen or snap at the hinge
- Proximity fobs that stop being detected after a battery or module replacement
All keys lost or just need a spare?
There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.
Stranded with your Chevrolet right now?
If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.
Getting a 2000 Chevrolet Blazer key made, step by step
Call with the year, make and model
Tell us you need a key for a 2000 Chevrolet Blazer, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Chevrolet key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 2000 Chevrolet Blazer key
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- All keys lost
- A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
Situations we are called to most often
- The key fob went through the washing machine.
- A used car was sold with one worn key and no spare.
- A hardware-store copy opens the door but the engine will not start.
- The only key to the car is lost somewhere between the beach, the restaurant and home.
- The key is locked in the trunk and the trunk release is disabled.
Why drivers choose Big Daddy
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Los Angeles County, Ventura County and the Anaheim area of Orange County.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.

Looking after your Chevrolet key
Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.
- Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
- When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
- Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
- If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
Choosing a car locksmith you can trust
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Get an itemized receipt showing labor, parts and the business details.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
Other Chevrolet Blazer years
- 2026 Blazer
- 2025 Blazer
- 2024 Blazer
- 2023 Blazer
- 2022 Blazer
- 2021 Blazer
- 2020 Blazer
- 2019 Blazer
- 2005 Blazer
- 2004 Blazer
- 2003 Blazer
- 2002 Blazer
- 2001 Blazer
- 1999 Blazer
- 1998 Blazer
- 1997 Blazer
- 1996 Blazer
- 1995 Blazer
- 1994 Blazer
- 1993 Blazer
- 1992 Blazer
- 1991 Blazer
- 1990 Blazer
Other Chevrolet models
- Chevrolet Corvette keys
- Chevrolet Suburban keys
- Chevrolet Tahoe keys
- Chevrolet Express keys
- Chevrolet Malibu keys
- Chevrolet Camaro keys
- Chevrolet Silverado 1500 keys
- Chevrolet Silverado 2500HD keys
- Chevrolet Impala keys
- Chevrolet Equinox keys
- Chevrolet Colorado keys
- Chevrolet Traverse keys
- Chevrolet Astro keys
Related automotive locksmith services
- Push-to-Start Key Programming
Programming proximity keys for push-button ignition vehicles.
- Key Fob Programming
Programming new or replacement key fobs.
- Car Key Replacement
Replacing lost, stolen or damaged car keys.
- Motorcycle Key Replacement
Replacing lost or broken motorcycle keys.
- Ignition Repair
Repairing ignition cylinders that are stuck, worn or will not turn.
- Automotive Locksmith
Mobile key, lock and ignition service for cars, trucks, SUVs, vans, motorcycles and fleets.
- Semi-Truck Locksmith
Lockouts, key replacement, ignition repair and fleet key services for commercial trucks.
- Boat Key Replacement
Replacing keys for boat ignitions, compartments and storage locks.
Where we make 2000 Chevrolet Blazer keys
Big Daddy Car Key Replacement is a mobile service covering 150 communities across Los Angeles County, Ventura County and the Anaheim area of Orange County. The work is done wherever the vehicle is parked. A few of the areas we serve are listed here; see all service areas for the rest.
- 2000 Chevrolet Blazer keys in Palmdale
- 2000 Chevrolet Blazer keys in Hermosa Beach
- 2000 Chevrolet Blazer keys in Agua Dulce
- 2000 Chevrolet Blazer keys in Anaheim
- 2000 Chevrolet Blazer keys in Long Beach
- 2000 Chevrolet Blazer keys in Rolling Hills
- 2000 Chevrolet Blazer keys in Northridge
- 2000 Chevrolet Blazer keys in Lawndale
- 2000 Chevrolet Blazer keys in Beverly Hills
- 2000 Chevrolet Blazer keys in South Pasadena
- 2000 Chevrolet Blazer keys in North Hollywood
- 2000 Chevrolet Blazer keys in Duarte
- 2000 Chevrolet Blazer keys in Ojai
- 2000 Chevrolet Blazer keys in Hawthorne
- 2000 Chevrolet Blazer keys in Diamond Bar
- 2000 Chevrolet Blazer keys in Claremont
- 2000 Chevrolet Blazer keys in La Mirada
- 2000 Chevrolet Blazer keys in Commerce
- 2000 Chevrolet Blazer keys in View Park–Windsor Hills
- 2000 Chevrolet Blazer keys in North Hills
- 2000 Chevrolet Blazer keys in Mission Hills
- 2000 Chevrolet Blazer keys in Pico Rivera
- 2000 Chevrolet Blazer keys in La Cañada Flintridge
- 2000 Chevrolet Blazer keys in Sun Valley
2000 Chevrolet Blazer key replacement: frequently asked questions
Does a 2000 Chevrolet Blazer key need programming?
A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.
Can any hardware store copy my 2000 Chevrolet Blazer key?
If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.
My Chevrolet key turns in the door but not the ignition. Why?
The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.
Why is the security light flashing on my Chevrolet and the engine will not start?
The anti-theft system does not recognize the key or the ignition sensor signal. It may be a worn key, a failed Passlock sensor or an unprogrammed chip. We diagnose which and correct it; a relearn procedure is often part of the fix.
Can a Chevrolet key be programmed without going to the dealer?
Yes for the great majority of models. Older systems use an on-board relearn and newer ones need a diagnostic tool with security access, which we carry.
Do I have to tow my 2000 Chevrolet Blazer to you?
No. We are a mobile service. The key machines and programming equipment are in the van, and the work is done where the vehicle is parked.
How much does a 2000 Chevrolet Blazer key cost?
It depends on the key type for your exact trim and on whether you still have a working key. Call (562) 550-7206 with the year, make and model and we will give you a price range before sending anyone.
Can you program a key I bought online for my 2000 Chevrolet Blazer?
We can try, if it is the correct part. We test the chip and frequency first. Many low-cost online keys are the wrong type or locked to another car, so we cannot guarantee a customer-supplied key.
Does car insurance cover a replacement Chevrolet key?
Some comprehensive policies, roadside plans and dealer key-protection plans do. Check your policy; we provide an itemized receipt you can submit.
What do you need from me to make a 2000 Chevrolet Blazer key?
A photo ID and proof that the vehicle is yours, such as registration, title or insurance, plus access to the vehicle. Having the VIN ready when you call speeds things up.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
Which areas do you cover?
We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
