Skip to content
Big Daddy Car Key Replacement logo(562) 550-7206

1998 Chrysler Concorde Key Replacement

Big Daddy Car Key Replacement makes 1998 Chrysler Concorde keys on site. A mobile technician comes to the car, verifies ownership, cuts the key to factory code and programs it.

(562) 550-7206
  • Open 24 hours, every day
  • We come to you
  • Price range before we dispatch
1998 Chrysler Concorde Key Replacement by Big Daddy Car Key Replacement

Quick answer

The 1998 Chrysler Concorde typically uses a traditional edge-cut metal key with no transponder chip. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting. Big Daddy Car Key Replacement makes 1998 Chrysler Concorde keys on site, 24 hours a day. Call (562) 550-7206 for a price range.

Last updated

Vehicle
1998 Chrysler Concorde
Typical key
Traditional metal key
Transponder chip
Usually no; varies
Blade
Edge-cut
Programming
Not normally required
Hours
Open 24 hours, 7 days a week
Phone
(562) 550-7206
On this page

What kind of key does a 1998 Chrysler Concorde use?

The 1998 Chrysler Concorde typically uses a traditional edge-cut metal key with no transponder chip. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting.

Traditional metal key

A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

1998 Chrysler Concorde key replacement
Traditional metal key for a 1998 Chrysler Concorde, made on site.

How we make a 1998 Chrysler Concorde key

For the 1998 Chrysler Concorde we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.

This page covers the 1998 model year. For other years, see the Chrysler Concorde key replacement overview, or browse all Chrysler models.

How Chrysler key and immobilizer systems work

Chrysler, Dodge, Jeep and Ram vehicles use the Sentry Key Immobilizer System. Early versions used a grey-headed transponder key, later ones the Fobik, a plastic pod that turns in the dash, and then Keyless Enter-N-Go proximity fobs. Programming requires the vehicle’s four-digit PIN. From the 2018 model year a Secure Gateway Module blocks unauthorized diagnostic access, so registered equipment is needed to program keys.

Chrysler introduced the Sentry Key immobilizer in the late 1990s and the Fobik pod key in 2008, followed by Keyless Enter-N-Go proximity fobs. Vehicles from 2018 onward have a secure gateway that needs authorized access for programming.

Common Chrysler key and lock problems

These are the issues we see most often on Chrysler vehicles:

  • Fobik keys that are not recognized because of a worn wireless ignition node
  • "Key not detected" messages on push-button models with a weak fob battery
  • Lost keys on vehicles protected by the secure gateway, which defeats generic tools
  • Worn door and ignition wafers on older Wranglers and Cherokees

All keys lost or just need a spare?

There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.

Stranded with your Chrysler right now?

If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.

Getting a 1998 Chrysler Concorde key made, step by step

  1. Call with the year, make and model

    Tell us you need a key for a 1998 Chrysler Concorde, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.

  2. We verify ownership

    Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.

  3. We identify the exact key system

    Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.

  4. The key is cut to code

    The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.

  5. The key is programmed to the car

    For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.

  6. Everything is tested before we leave

    We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

Programming a 1998 Chrysler Concorde key
Keys are programmed through the vehicle’s diagnostic port and tested before we leave.

What to have ready

  • A government-issued photo ID
  • The vehicle registration, title or current insurance card in your name
  • The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
  • Any remaining keys or remotes, including ones that no longer work
  • The vehicle itself, parked where a technician can open the driver’s door fully

Mobile locksmith or dealership for a Chrysler key?

Mobile locksmithDealership
Where the work happensAt your vehicle, wherever it is parkedAt the dealer’s service department
Towing with all keys lostNot neededUsually required
AvailabilityOpen 24 hours, including weekends and holidaysService department business hours
Typical waitOften the same dayAppointment, plus time to order the key by VIN
Key optionsOEM or quality aftermarket where availableOEM only
Restricted late-model systemsSome require a dealer key; we tell you up frontSupported

A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.

What affects the cost of a 1998 Chrysler Concorde key

Model year and system generation
Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
Time and location
Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
Lock or ignition condition
If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
Whether a working key exists
Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
OEM or aftermarket parts
Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.

Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.

Lost keys and vehicle security

A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.

Equipment we bring to the vehicle

Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.

Car key terms explained

Transponder
A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
Proximity key
A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
Diagnostic port
The connector under the dashboard through which keys are programmed to the vehicle’s computer.
VIN
The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
Immobilizer
The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
All keys lost
A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
Remote head key
A key with the lock and unlock buttons built into its head, alongside the blade and chip.

Situations we are called to most often

  • The ignition will not turn and the key will not come out.
  • The key fob went through the washing machine.
  • A used car was sold with one worn key and no spare.
  • The key is locked in the trunk and the trunk release is disabled.
  • A hardware-store copy opens the door but the engine will not start.

Why drivers choose Big Daddy

Car key specialists
Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
A price range before we dispatch
When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
Ownership is always verified
We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
Most jobs finished in one visit
Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
A real, reachable business
Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
Open 24 hours, every day
Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Los Angeles County and Ventura County.
Chrysler car key service
Big Daddy Car Key Replacement: mobile, open 24 hours.

Looking after your Chrysler key

Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.

  • When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
  • Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
  • Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
  • Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
  • Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
  • Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
  • Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.

Choosing a car locksmith you can trust

  • Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
  • Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
  • In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
  • Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
  • Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.

Other Chrysler Concorde years

Other Chrysler models

Where we make 1998 Chrysler Concorde keys

Big Daddy Car Key Replacement is a mobile service covering 140 communities across Los Angeles County and Ventura County. The work is done wherever the vehicle is parked. A few of the areas we serve are listed here; see all service areas for the rest.

1998 Chrysler Concorde key replacement: frequently asked questions

Does a 1998 Chrysler Concorde key need programming?

A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.

Can any hardware store copy my 1998 Chrysler Concorde key?

If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.

My Chrysler key turns in the door but not the ignition. Why?

The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.

Do I need a PIN code to program a Chrysler key?

Yes. The immobilizer PIN is required for key programming. We retrieve it from the vehicle or through authorized channels after verifying ownership.

Can you program keys for a 2018 or newer Chrysler with the secure gateway?

Yes. We use equipment registered for secure gateway access, so late-model vehicles can be programmed on site.

Can you make a key for a 1998 Chrysler Concorde if I have lost every key?

In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.

Can you program a key I bought online for my 1998 Chrysler Concorde?

We can try, if it is the correct part. We test the chip and frequency first. Many low-cost online keys are the wrong type or locked to another car, so we cannot guarantee a customer-supplied key.

Do you also repair the ignition on a 1998 Chrysler Concorde?

Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.

Do I have to tow my 1998 Chrysler Concorde to you?

No. We are a mobile service. The key machines and programming equipment are in the van, and the work is done where the vehicle is parked.

Does car insurance cover a replacement Chrysler key?

Some comprehensive policies, roadside plans and dealer key-protection plans do. Check your policy; we provide an itemized receipt you can submit.

Which areas do you cover?

We serve communities across Los Angeles County and Ventura County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.

Where is Big Daddy Car Key Replacement located?

Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.

Call Now (562) 550-7206Open 24 hours · mobile locksmith