Skip to content
Big Daddy Car Key Replacement logo(562) 550-7206

1999 Chrysler Concorde Key Replacement

Big Daddy Car Key Replacement makes 1999 Chrysler Concorde keys on site. A mobile technician comes to the car, verifies ownership, cuts the key to factory code and programs it.

(562) 550-7206
  • Open 24 hours, every day
  • We come to you
  • Price range before we dispatch
1999 Chrysler Concorde Key Replacement by Big Daddy Car Key Replacement

Quick answer

The 1999 Chrysler Concorde typically uses a transponder chip key: a edge-cut metal key with a coded chip in its head that the immobilizer must recognize before the engine will run. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting. Big Daddy Car Key Replacement makes 1999 Chrysler Concorde keys on site, 24 hours a day. Call (562) 550-7206 for a price range.

Last updated

Vehicle
1999 Chrysler Concorde
Typical key
Transponder chip key
Transponder chip
Yes on most; varies by trim
Blade
Edge-cut
Programming
Required, done on site
Hours
Open 24 hours, 7 days a week
Phone
(562) 550-7206
On this page

What kind of key does a 1999 Chrysler Concorde use?

The 1999 Chrysler Concorde typically uses a transponder chip key: a edge-cut metal key with a coded chip in its head that the immobilizer must recognize before the engine will run. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting.

Transponder chip key

A transponder key looks like an ordinary key with a plastic head, but the head holds a tiny chip with no battery. When you turn the ignition, an antenna ring around the lock energizes the chip and asks for its code. If the immobilizer recognizes the answer, it lets the engine run. If not, the engine cranks without starting or starts and dies within seconds.

1999 Chrysler Concorde key replacement
Transponder chip key for a 1999 Chrysler Concorde, made on site.

How we make a 1999 Chrysler Concorde key

For the 1999 Chrysler Concorde we cut the blade to code, then program the chip. Where a working key exists, its data can often be cloned or used to authorize a new key quickly. When every key is lost, we connect to the car through the diagnostic port, obtain security access, and register new keys directly to the immobilizer. A spare transponder key is usually done in 15 to 30 minutes. An all-keys-lost job takes longer, commonly 30 to 60 minutes, because security access takes time on many systems.

This page covers the 1999 model year. For other years, see the Chrysler Concorde key replacement overview, or browse all Chrysler models.

How Chrysler key and immobilizer systems work

Chrysler, Dodge, Jeep and Ram vehicles use the Sentry Key Immobilizer System. Early versions used a grey-headed transponder key, later ones the Fobik, a plastic pod that turns in the dash, and then Keyless Enter-N-Go proximity fobs. Programming requires the vehicle’s four-digit PIN. From the 2018 model year a Secure Gateway Module blocks unauthorized diagnostic access, so registered equipment is needed to program keys.

Chrysler introduced the Sentry Key immobilizer in the late 1990s and the Fobik pod key in 2008, followed by Keyless Enter-N-Go proximity fobs. Vehicles from 2018 onward have a secure gateway that needs authorized access for programming.

Common Chrysler key and lock problems

These are the issues we see most often on Chrysler vehicles:

  • Fobik keys that are not recognized because of a worn wireless ignition node
  • "Key not detected" messages on push-button models with a weak fob battery
  • Lost keys on vehicles protected by the secure gateway, which defeats generic tools
  • Worn door and ignition wafers on older Wranglers and Cherokees

All keys lost or just need a spare?

How many keys you still have matters more than almost anything else. With one working key present, a second key can usually be copied or added in a short visit. With no keys at all, the technician must first work out the correct cuts, from the VIN or by decoding a lock, and then gain security access to the immobilizer so a new key can be registered. That all-keys-lost process is routine for us and is done on site, but it takes more time. If you are down to your last key, adding a spare today is far cheaper than replacing every key later.

Stranded with your Chrysler right now?

Stuck without a working key? First make sure you are somewhere safe and visible. Think about whether a spare exists at home or with a family member. Then call (562) 550-7206 and give us the year, make, model, your location and whether the vehicle is locked or open. We will tell you the likely cost and how long a technician will take to reach you. For a child or pet locked inside, call 911 before anything else.

Getting a 1999 Chrysler Concorde key made, step by step

  1. Call with the year, make and model

    Tell us you need a key for a 1999 Chrysler Concorde, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.

  2. We verify ownership

    Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.

  3. We identify the exact key system

    Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.

  4. The key is cut to code

    The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.

  5. The key is programmed to the car

    For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.

  6. Everything is tested before we leave

    We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

Programming a 1999 Chrysler Concorde key
Keys are programmed through the vehicle’s diagnostic port and tested before we leave.

What to have ready

  • A government-issued photo ID
  • The vehicle registration, title or current insurance card in your name
  • The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
  • Any remaining keys or remotes, including ones that no longer work
  • The vehicle itself, parked where a technician can open the driver’s door fully

Mobile locksmith or dealership for a Chrysler key?

Mobile locksmithDealership
Where the work happensAt your vehicle, wherever it is parkedAt the dealer’s service department
Towing with all keys lostNot neededUsually required
AvailabilityOpen 24 hours, including weekends and holidaysService department business hours
Typical waitOften the same dayAppointment, plus time to order the key by VIN
Key optionsOEM or quality aftermarket where availableOEM only
Restricted late-model systemsSome require a dealer key; we tell you up frontSupported

A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.

What affects the cost of a 1999 Chrysler Concorde key

Whether a working key exists
Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
Key technology
A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
Time and location
Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
OEM or aftermarket parts
Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
Lock or ignition condition
If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.

Price depends on the chip type, whether you still have a working key, and how the vehicle grants programming access. Adding a spare while one key still works is always the cheaper job. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.

Lost keys and vehicle security

Whoever finds a lost key might find the car. During programming we can usually remove lost keys from the vehicle’s memory, which stops them starting the engine. That does not change the mechanical door lock, so if theft is a concern, the door cylinders can be rekeyed to a new cut as well.

Equipment we bring to the vehicle

Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.

Car key terms explained

All keys lost
A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
Laser-cut key
A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
Remote head key
A key with the lock and unlock buttons built into its head, alongside the blade and chip.
VIN
The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
Transponder
A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
Diagnostic port
The connector under the dashboard through which keys are programmed to the vehicle’s computer.
Proximity key
A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.

Situations we are called to most often

  • A used car was sold with one worn key and no spare.
  • A hardware-store copy opens the door but the engine will not start.
  • The dash reads "key not detected" and the start button does nothing.
  • The only key to the car is lost somewhere between the beach, the restaurant and home.
  • The ignition will not turn and the key will not come out.

Why drivers choose Big Daddy

Car key specialists
Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
One company for home, business and vehicle
The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
A price range before we dispatch
When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
A workshop that comes to you
Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
Ownership is always verified
We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
Plain explanations
We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
Chrysler car key service
Big Daddy Car Key Replacement: mobile, open 24 hours.

Looking after your Chrysler key

The chip is durable but not indestructible. Keys that have been crushed, soaked or overheated can keep turning the lock while no longer starting the car. Keep a programmed spare somewhere safe.

  • If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
  • Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
  • Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
  • Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
  • Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
  • Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
  • Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.

Choosing a car locksmith you can trust

  • Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
  • Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
  • Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
  • Get an itemized receipt showing labor, parts and the business details.
  • Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.

Other Chrysler Concorde years

Other Chrysler models

Where we make 1999 Chrysler Concorde keys

Big Daddy Car Key Replacement is a mobile service covering 150 communities across Los Angeles County, Ventura County and the Anaheim area of Orange County. The work is done wherever the vehicle is parked. A few of the areas we serve are listed here; see all service areas for the rest.

1999 Chrysler Concorde key replacement: frequently asked questions

Does my 1999 Chrysler Concorde key have a chip?

Most were built with a transponder chip in the key head. A security light on the dash, or a plain metal copy that turns the ignition without starting the engine, confirms it. We verify on site before cutting.

Can I program a 1999 Chrysler Concorde key myself?

Some vehicles allow a new key to be added using one or two existing programmed keys and a timed ignition sequence. With no working key, or on systems without that feature, diagnostic equipment is required.

Why does my Chrysler crank but not start with the new copy?

The copy was cut but never programmed, so the immobilizer does not recognize it. The blade is fine; the chip needs to be registered to the car or replaced with the correct type.

Do I need a PIN code to program a Chrysler key?

Yes. The immobilizer PIN is required for key programming. We retrieve it from the vehicle or through authorized channels after verifying ownership.

Can you program keys for a 2018 or newer Chrysler with the secure gateway?

Yes. We use equipment registered for secure gateway access, so late-model vehicles can be programmed on site.

Can you make a key for a 1999 Chrysler Concorde if I have lost every key?

In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.

Does car insurance cover a replacement Chrysler key?

Some comprehensive policies, roadside plans and dealer key-protection plans do. Check your policy; we provide an itemized receipt you can submit.

How many keys should I have for my 1999 Chrysler Concorde?

At least two. With two working keys you are never stranded, and on some makes two keys let you add another yourself.

Do you also repair the ignition on a 1999 Chrysler Concorde?

Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.

Do I have to tow my 1999 Chrysler Concorde to you?

No. We are a mobile service. The key machines and programming equipment are in the van, and the work is done where the vehicle is parked.

Where is Big Daddy Car Key Replacement located?

Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.

Can I book an appointment in advance?

Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.

Call Now (562) 550-7206Open 24 hours · mobile locksmith