Quick answer
The 1997 Ford Explorer typically uses a traditional edge-cut metal key with no transponder chip. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting. Big Daddy Car Key Replacement makes 1997 Ford Explorer keys on site, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 1997 Ford Explorer
- Typical key
- Traditional metal key
- Transponder chip
- Usually no; varies
- Blade
- Edge-cut
- Programming
- Not normally required
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 1997 Ford Explorer use?
- How we make a 1997 Ford Explorer key
- How Ford key and immobilizer systems work
- Common Ford key and lock problems
- All keys lost or just need a spare?
- Stranded with your Ford right now?
- Getting a 1997 Ford Explorer key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Ford key?
- What affects the cost of a 1997 Ford Explorer key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers choose Big Daddy
- Looking after your Ford key
- Choosing a car locksmith you can trust
- Other Ford Explorer years
- Other Ford models
- Related automotive locksmith services
- Where we make 1997 Ford Explorer keys
- 1997 Ford Explorer key replacement: frequently asked questions
What kind of key does a 1997 Ford Explorer use?
The 1997 Ford Explorer typically uses a traditional edge-cut metal key with no transponder chip. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting.
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

How we make a 1997 Ford Explorer key
For the 1997 Ford Explorer we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.
This page covers the 1997 model year. For other years, see the Ford Explorer key replacement overview, or browse all Ford models.
How Ford key and immobilizer systems work
Ford, Lincoln and Mercury use PATS, the Passive Anti-Theft System. A transponder in the key head must be registered in the car’s computer. Many models let an owner add a third key if two programmed keys are present; with one or none, diagnostic access is needed and there is often a built-in ten-minute security wait. Later models add integrated remote-head keys, laser-cut blades and Intelligent Access proximity fobs.
Ford’s PATS immobilizer arrived in 1996 and spread across the range by the early 2000s. Many Fords let you add a key yourself if you already have two working keys, which is the best reason to never be down to one.
Common Ford key and lock problems
These are the issues we see most often on Ford vehicles:
- A rapidly flashing theft light and no start after using an unprogrammed copy
- Ignition cylinders that jam on high-mileage Focus, Explorer and F-Series models
- Remote-head keys whose buttons wear through
- Door keypad codes that owners have forgotten or never learned
All keys lost or just need a spare?
There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.
Stranded with your Ford right now?
If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.
Getting a 1997 Ford Explorer key made, step by step
Call with the year, make and model
Tell us you need a key for a 1997 Ford Explorer, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Ford key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 1997 Ford Explorer key
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
- Immobilizer
- The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
Situations we are called to most often
- A hardware-store copy opens the door but the engine will not start.
- The dash reads "key not detected" and the start button does nothing.
- The ignition will not turn and the key will not come out.
- A used car was sold with one worn key and no spare.
- The key fob went through the washing machine.
Why drivers choose Big Daddy
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.

Looking after your Ford key
Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.
- Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
- Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
- If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
Choosing a car locksmith you can trust
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
Other Ford Explorer years
- 2026 Explorer
- 2025 Explorer
- 2024 Explorer
- 2023 Explorer
- 2022 Explorer
- 2021 Explorer
- 2020 Explorer
- 2019 Explorer
- 2018 Explorer
- 2017 Explorer
- 2016 Explorer
- 2015 Explorer
- 2014 Explorer
- 2013 Explorer
- 2012 Explorer
- 2011 Explorer
- 2010 Explorer
- 2009 Explorer
- 2008 Explorer
- 2007 Explorer
- 2006 Explorer
- 2005 Explorer
- 2004 Explorer
- 2003 Explorer
- 2002 Explorer
- 2001 Explorer
- 2000 Explorer
- 1999 Explorer
- 1998 Explorer
- 1996 Explorer
- 1995 Explorer
- 1994 Explorer
- 1993 Explorer
- 1992 Explorer
- 1991 Explorer
Other Ford models
- Ford E-350 keys
- Ford F-150 keys
- Ford Mustang keys
- Ford Expedition keys
- Ford Ranger keys
- Ford Taurus keys
- Ford F-250 Super Duty keys
- Ford F-350 Super Duty keys
- Ford Escape keys
- Ford E-150 keys
- Ford E-250 keys
- Ford Crown Victoria keys
- Ford Focus keys
Related automotive locksmith services
- Car Locksmith
On-site car key, lockout and ignition help wherever the vehicle is parked.
- Spare Car Key
Creating duplicate or backup keys.
- Lost Car Key Replacement
Making a new car key when all keys are lost.
- Remote Head Key Replacement
Replacing keys with built-in remote buttons.
- Scooter Key Replacement
Making replacement keys for scooters and small vehicles.
- Key Fob Replacement
Replacing remote key fobs for cars, trucks, SUVs and vans.
- Car Door Lock Repair
Repairing vehicle door lock cylinders and mechanisms.
- Key Fob Programming
Programming new or replacement key fobs.
Where we make 1997 Ford Explorer keys
Big Daddy Car Key Replacement is a mobile service covering 140 communities across Los Angeles County and Ventura County. The work is done wherever the vehicle is parked. A few of the areas we serve are listed here; see all service areas for the rest.
- 1997 Ford Explorer keys in Bradbury
- 1997 Ford Explorer keys in Manhattan Beach
- 1997 Ford Explorer keys in Baldwin Park
- 1997 Ford Explorer keys in Inglewood
- 1997 Ford Explorer keys in Westmont
- 1997 Ford Explorer keys in Simi Valley
- 1997 Ford Explorer keys in Santa Monica
- 1997 Ford Explorer keys in Hidden Hills
- 1997 Ford Explorer keys in Fillmore
- 1997 Ford Explorer keys in Studio City
- 1997 Ford Explorer keys in Hawaiian Gardens
- 1997 Ford Explorer keys in Valley Glen
- 1997 Ford Explorer keys in Westlake Village
- 1997 Ford Explorer keys in Arleta
- 1997 Ford Explorer keys in Avalon
- 1997 Ford Explorer keys in Lakewood
- 1997 Ford Explorer keys in Panorama City
- 1997 Ford Explorer keys in Signal Hill
- 1997 Ford Explorer keys in Calabasas
- 1997 Ford Explorer keys in Marina del Rey
- 1997 Ford Explorer keys in Winnetka
- 1997 Ford Explorer keys in El Monte
- 1997 Ford Explorer keys in Willowbrook
- 1997 Ford Explorer keys in West Carson
1997 Ford Explorer key replacement: frequently asked questions
Does a 1997 Ford Explorer key need programming?
A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.
Can any hardware store copy my 1997 Ford Explorer key?
If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.
My Ford key turns in the door but not the ignition. Why?
The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.
I have only one Ford key. Can I program a second one myself?
No. The self-programming procedure requires two working keys. With one key, a locksmith or dealer must add the spare with a diagnostic tool, which is still quicker and cheaper than replacing all keys later.
Why does programming a Ford key take ten minutes of waiting?
PATS enforces a timed security delay before it grants programming access on many models. It is normal and built into the system.
Will my lost 1997 Ford Explorer key still start the car?
For chip and smart keys we can usually erase lost keys from the car’s memory during programming, so they no longer start the engine. A lost key could still open the door mechanically unless the locks are rekeyed.
Do I have to tow my 1997 Ford Explorer to you?
No. We are a mobile service. The key machines and programming equipment are in the van, and the work is done where the vehicle is parked.
Can you make a key for a 1997 Ford Explorer if I have lost every key?
In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.
How much does a 1997 Ford Explorer key cost?
It depends on the key type for your exact trim and on whether you still have a working key. Call (562) 550-7206 with the year, make and model and we will give you a price range before sending anyone.
Is a locksmith-made Ford key as good as a dealer key?
Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County and Ventura County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
